DIY Soldering Iron from PENCIL
HTML-код
- Опубликовано: 11 окт 2024
- In this video I show how I turned a pencil into a temporary soldering iron. It works because the graphite of the pencil is conductive. When a current passes through it, it heats up enough to melt solder. This project is for fun and educational purpose (or if you really need to solder something) but the pencil won’t last more than a few solders.
I wore safety glasses the entire time and I would not have even thought to attempt this without wearing them.
It took a long time to film and edit, please considering subscribing if you enjoyed it!
Tiktok: madeyoumake
Instagram: madeyoumake
RUclips: madeyoumake
Please consider subscribing if you liked the video! ❤
Its a truth
Да врут они не работает она
Дьидь
😂
you burnt down my table and also my wire too
:(
Всем доброго времени суток :)спасибо автору за его идеи и мастер-класс по изготовлению этого паяльника!!! 👍👍👍👍 только что закончил сборку по Вашему видео. Полтора часа затратил. Три раза грифель обламывал на этапе нанесения углублений под провода... В итоге я всё-таки смог!!! Всё получилось!! Работает шикарно!!! Моя первая в жизни самоделка)))) спасибо за всё)))
Try pencil more large 6B
I didn't try but could be cleaner to weld with the opposite head of the pencil.
In that case you can also re-sharp the edge if it gets consumed or damaged (maybe I'm wrong and it won't work).
يتسفسغس
This did with too large of an output and the graphite exploded, 10/10.
Lesson learnt, don't use more than required output
2:10
Me encanta 👍👍👍👍😲😲😲😲🤯🤯🤯🤯 te felicito 👍👍👍
Thanks very effective method
Bhi charger jl to nhi ji ga
OMG ITS WORKS SO THANK❤❤❤❤
Te funciona a ti?
be respectful , using the Lord's name
Is that one time use? Coz mine didnt work after one time used🙃
I think the copper wire burn
That's actually amazing the way it works.
Lekej
Te sirve?
It's safety or danger? I need this and i don't have heat shrink tube
Then use tape because it is not mandatory
This is super amazing
"safety goggles are needed"
So when you blow the house you don't hurt your eyes
Just kidding 😀
Pls reply 🙏
I make the same thing and it's getting to hot but when I want like to solder a resistor or a capacitor it didn't solder the iron from the board why
I used a 12v 1 amps charger
The voltage is too high it might have melted some plastic on the copper wires. It only works with a 5V charger. It could also be that the wires aren’t wrapped tight enough around the pencil. Also it needs to be a HB pencil. And you have to wait a good minute for it to heat up.
@@madeyoumake ah ok thanks 👍 you so much
Im currently incarcerated. (Yes i have a cellphone in prison) And this is what ive needed for too long thanks!!
Do you. Need a pen pal..
From a pencil you have turned it into an electric soldering iron, with many very useful effects, it's too great to do at home.
Did it really worked because I want to try it
Doesn't work for me. Chat GPT says 5V is nowhere near sufficient for producing the ~200c / ~ 400f necessary to melt solder. Thoughts?
car battery has enough amps also necropost
5v @ 2 amps. It's quite a bit of current.
Yes it's working
When I do this my charger adapter gets extremely hot and im unsure if its safe .
How manny amps is the adapter??? Is the pencil hb? Mine stuffed up. Also the wire went red hot. Also lead smoke is Toxic so be careful peeps.
12volt adapter 1 or 2 amps pencil is hb
Kanka makine çok iyi ben denedim 5 saniyede ısınıyo ama tek sorun adaptör çok ısınıyor fazla durarsa eğer adaptör bozula bilir şarja taktınız cihazlar yana bilir adaptör patlayıp yangın bile çıkartabilir ama bu sorunlar çözülürse çok iyi olur.
O ısıyla daralan boru yerine elektrik bandı yapıştrak bişey olur mu
Does it work if my iput is 5V 1 Amp? instead of 2 Amps
Yes
Cool. Now these are the videos i like😁
More to come! :)
Cool👍👍
Which type of pencil did you use.
graphite pencil
can the block say 9.0V - 1.67 A or 5.0V - 2.0 A?
I did the same, look how it turned out for me
Op thanks for this video❤❤
A forces has to have what goes on the tip at the end of finishing it?
Its so cool but why safety goggles are needed?
If the solder pops up at your eyes it would hurt alot lol
explosion just in case, sometimes happen with diy
My wire cable becomes to hot whenever I use it
Bhai charging kitne woltej ka he
why it does not work?? i am use old usb cable (i did open this cable and used red and black) and pencil HB-2 . and connected to my lapptop then im wait 5 minets then nothing happend .... i need help please
Dont try plugging it into a laptop
genius! what you have now is a laptop pencil! not a soldering pen! hurry up go get a patent for your invention
best video boss
"Bravo! It is a lower voltage used; And? it is a very smart technique via(Whereby?). It uses the traditional lead method technology for newton heat(Power) absorption. ."👍
What if the cable has four wires
Black and red wire is right
get 2 pencils
I try to make it but it doesn't work why
Usually when it doesn’t work it’s because of a loose connection. Make sure the wires are wrapped around tight. You also need to leave it turn on for about a minute to heat up! Keep testing to solder every few seconds and eventually it should work!
Can i use normol mobile charger??
Amazing!
Hi can this Soldering Iron melt 2 bits of metal together?
It's not that powerful unless the metals you are talking about have a very very low melting point.
good
Que pasa si lo hago con un output 12.0 v = 1.0A
12v is too high try 5v
can it shock me? electrically?
Probably, But it may injure you due to the hot temparature, Not shock, (I'm beginner to electric)
I will sub 👌
A ponta do lapis ela acabar?
❤
does it take time to heat up?
I don't know.reply
Yes
@@r.ordinary189 ok thx
um no electrons are normally hot it will get hot instantly
Is this safe ?
Does it really work pls answer as i am trying it for my school project
It does trust me
Nice
Very cool ❤️❤️❤️
Agli baar power bank banana😊😊😊
cool❤❤❤❤
Funciona con cualquier lapiz
Claro
No ase corto
Thanks
Good tutorial looks like it works from others comments but when I made it, it basically exploded 😢
How many volts and amperes did you power the cable with?
Can i use 5V 1A adapter
Yes you can use
Kya ham ise 220 volts mein Laga sakte hain
Bhai agar swarg mei jaldi pahuchna hai to try kar skte ho..😂
It is not working
it's not real
නියමයි
Hi is working yes or no
🎉🎉🎉
I love you.❤
Sending support idol
Vgood 😊😊
Can use other pencils except HB?
no the machine checker will not recognize your answer and you will need to repeat the test
0:41 its funny how that USB-C truned to Micro USB
How is the pencil not on fire?
Do I need to use a copper tube for it to work??
Nope it works with just a pencil :) It lasts longer with the tube though!
@Made You Make Thanks man and can I also use colour pencils because I got no normal pencils
@@Cliker_cookie_1999 no it has to be normal pencil colored pencils will just do nothing
❤❤❤
O meu não funcionou 😢😢😢😢
Why mine not work it just heat up a bit even after 5 minute
Depends on the graphite in the pencil. Try a different kind of pencil. Some graphite is more resistant.
Can I use normal mobile charger?????
Yeah probably
bro that true and i make that in a second but my dad said it's broken so i use one with that
Bro ye koi bhi charger me work kare ga
I don't understand what you wrote
wao
How it's true?
Because the battery was hooked up to itself so it made a hot surface that can be used for soldering. If the wires are wrapped around each other though, you get a welding tool.
Good
imagine pencil fell and now its broken
How many volts?
my power bank is over heating
Mine cable has 4 wire inside it what do I do? It has white, red, green, and black
Red is + and black is -
Green and white are signal transferring wires
@@thesniperofcs just snip the green and white wires as if you where making wires to recharge nic
Red and black
you need 2 pencils then
Stuff like this is how 3rd world rekt webm threads are created.
is it possible to use a 2H pencil?
Yes you can
Bro mere wire me kuch alag hi colours ke wire hai or 4 wire hai 😅
Please do not put it into the socket without an adapter..
Can we use copper wire
Yes
Yes
A forces has to have what he put at the end?
i follow the steps and this is hot but it not dissolving the solider (the wires are connected properly)
Are you sure you’re using a HB pencil? Different grades have different conductivity
@@madeyoumake this HB-2 thats what written on the pencil...
Can I use a screw instead?
لااا
@@NuriQassim ليش؟
👍👍👍👍👍
I will try it if it works i will come with feedback
bro died
تمسخر بينا ياخويا😂😂😅
Katna volt ampr ha charger ma
Ребят кто хочет сделать паялтник лучше уже из турбо зажигалки сделайте оно хоть греть будет и нормально паять будет а не этот карандаш😂
It doesn't work, because we want to give it atleast 60v I tried it 10+ times 😕😐
Bhi ye fake he mene bahut baar try kiya nahi hua 😢😂
جربتها ولم تعمل
not work
Quanto tempo leva para a ponta aquecer
It should take about 1 minute