Old School Model Works Quickie 500 flight
HTML-код
- Опубликовано: 19 июн 2020
- This is a demo flight of our production Old School Model Works Quickie 500 kit. This one is built stock and came in at 3 pounds, 8-3/8 ounces, ready to fly.
Powering this model is an older O.S. 40P 2-stroke glow engine, with it's original strap-on muffler.
Specifications:
Wingspan: 51 inches
Wing Area: 510 square inches
Length (airframe only): 37.25 inches
Weight: 3.5 - 4.25 pounds
Radio: 4 channel system
Power: .25-.46 glow engine, or equivalent electric power system
For more information, flight videos, and to order one of our Old School Model Works Quickie 500 kits, visit www.oldschoolmodels.com/q500.htm
Let’s build something.
#aircraft #airplane #aviation #balsa #balsafliesbest #handmade #hobby #lasercut #lasercutting #madeinusa #plane #ply #radiocontrol #radiocontrolled #rc #rcairplane #rcmodeling #rcplane
Awesome! I was flying back in the day when they were popular!
Can’t wait to get our hands on this!
it’s so great!
Last one I bought paid like $60 kit with Styrofoam balsa covered wing.......fox 40......90 to 100 any day...got it in storage
It needs a nelson.
I'm very interested in buying and building one of these looks like a fun one!! How does this plane handle windy conditions?
Assuming you're not talking hurricane force winds, you'll have no problem at all with wind. Low side profile will keep it from blowing across the runway in crosswinds and the low front profile keep it from loosing too much speed into the wind.
@@nxnw yea , hurricane type winds ,lol 😆 awesome, thanks for the info on this plane!!
Yes glow power handles the wind much better than the foam electric stuff!
Can this be done as a trike vs tail dragger?
Would an O.S. 55AX be too much for it?
Well, it wasn't made for that large of a displacement in racing. But for sport flying you could probably get away with it. You might need a little more work on getting the C.G. right as that motor will weight a little more. Also, I would suggest wrapping the wing's center section with a layer of fiberglass cloth and export to strenghten it for the higher g-loads it could experience.
Is this an ARTF or a KIT?
We only make kits.
Mark Lanterman that’s great! Do you also post to EU?
@@ripmax333 Contact us through email on this for the details.