My dad had his 96 serviced like this, by the local "Honda Guy" and soon after the engine started running really bad. He took it to the dealer and they found a short length of the file he used had broken off and made its way down into the valve on cylinder #2, holding it open. Damaged head, valve and piston, I think the sleeve/block was OK. I'm not saying don't do this but, be really damn careful people. If you drop anything (other than carbon dust) down in those holes you MUST pull the intake manifold. The more you know, right? Never the less this is a great video! Good Job!
+Wade Woodring yeah it seems more of a human error than the job error. You just gotta be careful of dropping anything down there like you said. I would've taken it back to the guy and have him redo the job since the problem wasn't there before. Glad you solved the problem though.
Thanks a ton. Not a lot of DIY stuff out there for the D16Y5. Really helpful since this is a common problem with HX/VTEC-E. I wish I would have found out along time ago. I chased a CEL for about 10 years, and threw hundreds of dollars of parts at it. I haven't done the cleaning yet, but I'm 99.999% sure this is what's going on. Could have been fixed for the cost of some parts cleaner, and a bit of time. Really good job on the video too. I'm a parts changer, and feel comfortable doing this. Thank you.
If you decide to do this, DO NOT use a file on the intake while it's still on the car. You don't want to have any metal shavings going into the engine. Do it correctly, take off the manifold.
I always use the oldschl method to clean this type if shit off...good ol' gasaline in a spray bottle...in a well and safe ventilated area that is....but hey gott give it up to the guy , a clean system is better than a dirty one all day long so good job bro...great to know for those D16 engines who do have an EGR valve.
Just to note, the HX (d16y5) is the only 6th gen single cam civic that has an EGR. The DX (d16y7) and EX (d16y8) don't have an EGR.. Thanks for the video
Had a random misfire on all cylinders. Didn't know about these passages until went to Honda for a diagnostic. Spent hours checking everything ! The ports were way more clogged than yours. Hope this gets around, Honda wanted $600 to clean and instal new EGR valve, it was o.k. Thanks for a good video.
Buena noche, un saludo desde Culiacán, Sinaloa, México sigo de cerca todos tus videos, y tengo una pregunta que deseo me ayudaras en un tiempo tengo un honda accord de 1997, 4 cilindros, VTEC, recien cambie las luces principales y estan desalineadas y mi pregunta es como ajustarlas muchas gracias éxito en todo...
si no son las mismas de fabrica. va depender donde las compraste hay unas hechas en china esas siempre quedan mal lo mas recomendable son las OEM esas sales buenas
The part he removed is the EGR chamber cover, correct? Not the valve cover? When I search up EGR valve cover gasket, it's a totally different shape than the part shown here.
Great video. My car is honda domani 1997, engine code D16A. I wonder if my engine have this EGR like that. Does anyone know? I noticed that my car don't have the EGR bottle on the left side just like in the video. But i noticed a bottle stated PCV. Is that have something to do with EGR?
Did you ever figure out the problem. Currently having issues. I swapped mine and now has random misfire on all cylinders. Changed everything and still stumbles and misfires anything over 1/4 throttle
Karina Cea during non AC operation, the AC compressor clutch isn’t engage, the pulley is free spinning on the drive belt so it doesn’t have any drag. When AC is operating, the AC compressor clutch is engaged and causes the drive belt to have a drag, which causes engine to work harder to spin the AC compressor.
My '96 Civic won't start when the motor is warm. Has fuel, spark and compression. Timing belt replaced 5,000 miles ago. Could a clogged EGR valve be the problem?
I went to my local oreillys to go pick up a new gasket they have no clue what a "EGR gasket is" it only shows up with the valve gasket for the egr is there a specific name I could tell them? ive already tried "EGR chamber/ Gasket"
Thanks, man. Great video, I have the same engine; Your video helped me a lot as I got the P0401 code. Sure enough, I followed your lead, and the 4 ports were fully clogged and caked up. I knew this must be the problem, and sure enough, after cleaning all the gunk out including that on the manifold over, code cleared!
I am curious, how delicate do you have to be when cleaning the EGR cover and the inside? Could you just use like a metal brush and brake cleaner for the EGR cover? Thx for the video!
I think they are called that too. I tried looking it up and could not find it though. I think I might have to go out there and talk to someone. Funny thing is I actually did this just a year ago with a new gasket and everything lol. Thanks for your help and for an awesome video :)
Yea that is true. I went ahead and used the old one. I tightened the bolts down to ten ft lbs. I think it did the trick but I still have a vacuum leak somewhere. I think it is either the PCV or the IAC at this point. I worked hard at redoing the exhaust manifold gasket and the intake egr passages. Would a leak after the catalytic converter and o2 sensor affect stft and ltft?
+Tub Hmoob Lauj - Check your Spark Plug Wire. Sometimes if it's " Loose " it will pop off. Another thing... Blow-By on that Cylinder can cause Rubber Boot to blow off, thus having Mis-Fire!
@@NutzAboutBolts would it damage something if one were to flood those holes with carb or brake cleaner? (and then start the car without trying to remove the cleaner) I guess it would just go into your motor and cause a temporary rich condition, right? Could something like that damage a catalytic converter? (maybe this is a silly question. I don't know much about cars, just very basic stuff.)
James Chuaycham ป้อม ศักดิ์ชัย I'd that's the egr code this should fix the problem if the code still comes up after you have done this then you need to replace the egr, I have a 98 hx with this problem, I replaced the egr and still have the code so this video here should fix my problem for sure, I really need to pass inspection lol
I have a honda crx 1989 hf its showing code 12 meaning (EGR) check engine light comes on after running my crx for 2 or 3 minutes on the road then start idling up and down like i have a performance cam in it🤣 not funny tho a lot of people say that that my motor dosent have EGR but i can see something that looks like one just next to the fuel rail a lot of people say to me its just the idle control valve but can someone help me with this please?by the way my crx has a d15b2
+Luis Montalvo - There is only 2 things you can do if you have EGR Problems / Codes.... #1- Clean it and put it back. #2- After cleaning and it's doing the same, REPLACE it!!!
Not always true. On a lean-burn model such as VX or HX, the EGR is extremely important to getting good MPG. The lean combustion is fairly delicate and without the EGR, the car will add more fuel correct the higher flame temps.
wow, I have a same car same color just like yours that was doing the cleaning today, really wish that I could see your video and it would have made things easier to remove, one thing that I need to say, you didn't clean the EGR valve which is probably very dirty just like the passages, some people are sharing egr valve for other hondas on youtube and I just saw it, I'll do the cleaning soon, if you don't mind sharing the video about clean egr valve, that'll be perfect, thanks again for sharing this great video
Thanks for the video! -I cleaned the gutters, the car spins the wheel in 3rd gear! under the top deck! -I hope you just left it out of the video anyway put it back! -Thank you pro!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
My dad had his 96 serviced like this, by the local "Honda Guy" and soon after the engine started running really bad. He took it to the dealer and they found a short length of the file he used had broken off and made its way down into the valve on cylinder #2, holding it open. Damaged head, valve and piston, I think the sleeve/block was OK. I'm not saying don't do this but, be really damn careful people. If you drop anything (other than carbon dust) down in those holes you MUST pull the intake manifold. The more you know, right? Never the less this is a great video! Good Job!
+Wade Woodring yeah it seems more of a human error than the job error. You just gotta be careful of dropping anything down there like you said. I would've taken it back to the guy and have him redo the job since the problem wasn't there before. Glad you solved the problem though.
Thanks a ton. Not a lot of DIY stuff out there for the D16Y5. Really helpful since this is a common problem with HX/VTEC-E. I wish I would have found out along time ago. I chased a CEL for about 10 years, and threw hundreds of dollars of parts at it. I haven't done the cleaning yet, but I'm 99.999% sure this is what's going on. Could have been fixed for the cost of some parts cleaner, and a bit of time. Really good job on the video too. I'm a parts changer, and feel comfortable doing this. Thank you.
If you decide to do this, DO NOT use a file on the intake while it's still on the car. You don't want to have any metal shavings going into the engine. Do it correctly, take off the manifold.
+Kim Veeck you're right, but we just file it lightly to get the carbon out.
I always use the oldschl method to clean this type if shit off...good ol' gasaline in a spray bottle...in a well and safe ventilated area that is....but hey gott give it up to the guy , a clean system is better than a dirty one all day long so good job bro...great to know for those D16 engines who do have an EGR valve.
Just to note, the HX (d16y5) is the only 6th gen single cam civic that has an EGR. The DX (d16y7) and EX (d16y8) don't have an EGR.. Thanks for the video
garretts91 ....really thank u. For saving my time w my y7
garretts91 I have a d16y8 and it has an egr...
Jeremy Dunn then you must have a y5 head. No y8s even full California spec have egr valves period.
garretts91 thanks for the heads up I was going nuts trying to find it good looking out bruh
I have dy8 and it does not have an egr valve
The egr passages he's referring to are in the egr chamber. You can buy a new egr chamber gasket.
Had a random misfire on all cylinders. Didn't know about these passages until went to Honda for a diagnostic. Spent hours checking everything ! The ports were way more clogged than yours. Hope this gets around, Honda wanted $600 to clean and instal new EGR valve, it was o.k. Thanks for a good video.
nice.
Buena noche,
un saludo desde Culiacán, Sinaloa, México
sigo de cerca todos tus videos, y tengo una pregunta que deseo me ayudaras en un tiempo
tengo un honda accord de 1997, 4 cilindros, VTEC, recien cambie las luces principales y estan desalineadas y mi pregunta es como ajustarlas
muchas gracias
éxito en todo...
si no son las mismas de fabrica. va depender donde las compraste hay unas hechas en china esas siempre quedan mal lo mas recomendable son las OEM esas sales buenas
I'm tryna find the part number for the egar plate gasket I can't find it anywhere
Try rock auto you might not need it.
What is the function of the air valve control on a Honda Civic EX 99?
It controls the amount of air bypassing the throttle plate during idle, and change the idling speed of the engine as needed.
Can u use brake cleaner where u were cleaning the ports with the file
Not if it goes into the engine.
@@NutzAboutBolts whats something u can clean it with
@@mrheff7125 just spray brake clean on a rag and wipe it away
@@NutzAboutBolts sounds good thnx for the help
Could this blockage cause poor acceleration?
The part he removed is the EGR chamber cover, correct? Not the valve cover? When I search up EGR valve cover gasket, it's a totally different shape than the part shown here.
EGR chamber / passage cover = CORRECT !!!
Does my 1996 Civic VI EJ9 90HP have these EGR too?
Great video. My car is honda domani 1997, engine code D16A. I wonder if my engine have this EGR like that. Does anyone know? I noticed that my car don't have the EGR bottle on the left side just like in the video. But i noticed a bottle stated PCV. Is that have something to do with EGR?
Hey my 1998 ex 5 speed swapped is misfiring all four cylinders random misfiring ,needs oe valve settings. How can I fix it
Did you ever figure out the problem. Currently having issues. I swapped mine and now has random misfire on all cylinders. Changed everything and still stumbles and misfires anything over 1/4 throttle
When turning on the AC why does my engine loses power? Like it decelerates below 0, I have a 99 Honda Civic EX
Because it requires engine power to turn the ac compressor.
NutzAboutBolts could you explain further
Karina Cea during non AC operation, the AC compressor clutch isn’t engage, the pulley is free spinning on the drive belt so it doesn’t have any drag. When AC is operating, the AC compressor clutch is engaged and causes the drive belt to have a drag, which causes engine to work harder to spin the AC compressor.
clean the iacv on the throttle body
what happen to my honda civic 1999 matic bcoz the engine goes dies after an hour of running
Can I do yhis to my Civic 1999 model? Im from the philippines. Can we use card cleaner into the whole you use file?
Will it throw code P0131 on 2000 Civic EX?
do I have to release the pressure from the fuel rail. if so where?
You can just open your gas cap to release the pressure
I have a civic 2000 d16y8 manual trans. Where is the egr valve 😅 i cant found it
My '96 Civic won't start when the motor is warm. Has fuel, spark and compression. Timing belt replaced 5,000 miles ago. Could a clogged EGR valve be the problem?
Timing issue maybe
I went to my local oreillys to go pick up a new gasket they have no clue what a "EGR gasket is" it only shows up with the valve gasket for the egr is there a specific name I could tell them? ive already tried "EGR chamber/ Gasket"
Part number to gasket for the plate
and what about those with no vtec?
Hello, does the metal seal not get cleaned?
Thanks, man. Great video, I have the same engine; Your video helped me a lot as I got the P0401 code. Sure enough, I followed your lead, and the 4 ports were fully clogged and caked up. I knew this must be the problem, and sure enough, after cleaning all the gunk out including that on the manifold over, code cleared!
What will it do if it is dirty or clogged?
What block is that?
Why didn't you put back the gasket?
thats what i noticed....
Maybe he was holding it onto that cover
nice injector d16y5 engine clean
I am curious, how delicate do you have to be when cleaning the EGR cover and the inside? Could you just use like a metal brush and brake cleaner for the EGR cover?
Thx for the video!
just make sure to not cause any metal shavings. You don't want it to fall into the egr ports.
anyone know where I can buy that gasket? no one seems to carry or know what I am talking about around here....
check dealership, maybe they're called EGR plate gasket, or EGR chamber gasket.
I think they are called that too. I tried looking it up and could not find it though. I think I might have to go out there and talk to someone. Funny thing is I actually did this just a year ago with a new gasket and everything lol. Thanks for your help and for an awesome video :)
lol, good luck! maybe dealership has to special order it. They usually don't have it in stock since its not a common part to replace.
Yea that is true. I went ahead and used the old one. I tightened the bolts down to ten ft lbs. I think it did the trick but I still have a vacuum leak somewhere. I think it is either the PCV or the IAC at this point. I worked hard at redoing the exhaust manifold gasket and the intake egr passages. Would a leak after the catalytic converter and o2 sensor affect stft and ltft?
I found only head gasket sets have them. Fel pro kit has it in there but rock auto has other sets that carry it too for cheaper
one of my spark plug boots keep popping off what can it be? same engine. sometimes causes a misfire too.
+Tub Hmoob Lauj - Check your Spark Plug Wire. Sometimes if it's " Loose " it will pop off. Another thing... Blow-By on that Cylinder can cause Rubber Boot to blow off, thus having Mis-Fire!
I think I hear parakeets in the background... burb go churp haha
if the egr plate isn't on tightly, will it cause a leak? I lost a bolt.
+Alexander Vang possible vacuum leak, would be definitely be bad.
Ok thanks
Brother Honda civic 2000 model I'm On AC After Einghin Vibrating And No Cach EXsilator Plz Tell Me What problem
If you are on AC and your Engine Shakes or Belt Broken = AC Clutch Problems
Excellent video. Easy to follow, concise, snd thorough! Thank you so much!
What’s the gasket called
17146-P2J-004, but it has been discontinued...
What did you guys use to clean the holes?
Brake clean
@@NutzAboutBolts spray brake clean inside the holes?
@@First426 we sprayed brake clean on the passage way part that we removed. The holes we just file the carbon down
@@NutzAboutBolts would it damage something if one were to flood those holes with carb or brake cleaner? (and then start the car without trying to remove the cleaner)
I guess it would just go into your motor and cause a temporary rich condition, right? Could something like that damage a catalytic converter? (maybe this is a silly question. I don't know much about cars, just very basic stuff.)
@@DentSmasher yes it’ll run rich and would stall the engine.
After I did this my gas pedal went straight to the floor. It feels like it's not hooked up
Make sure you put your throttle cable is put back the same way you removed it.
Will fix P0401 code too?
James Chuaycham ป้อม ศักดิ์ชัย I'd that's the egr code this should fix the problem if the code still comes up after you have done this then you need to replace the egr, I have a 98 hx with this problem, I replaced the egr and still have the code so this video here should fix my problem for sure, I really need to pass inspection lol
cual es el nombre de la válvula que sacaste primero ???
Es el regulador de presion de gasolina
This was well done and saved me a lot of money.Thanks
glad we could help :)
Casey Clair what is ur car's problem?
@@mohdfazili6116 High Nox.
I went to 2 Mechanics, they couldn't find my EGR Valve. They don't 'think my car has one. Honda Del sol 95' Does anyone know? thanks!
Mike Kollin's - Crack The Female Code no it doesn’t
BBQ fluid liquid cleans fast and great
Good to know
Bars son!
I have a honda crx 1989 hf its showing code 12 meaning (EGR) check engine light comes on after running my crx for 2 or 3 minutes on the road then start idling up and down like i have a performance cam in it🤣 not funny tho a lot of people say that that my motor dosent have EGR but i can see something that looks like one just next to the fuel rail a lot of people say to me its just the idle control valve but can someone help me with this please?by the way my crx has a d15b2
+Luis Montalvo - There is only 2 things you can do if you have EGR Problems / Codes.... #1- Clean it and put it back. #2- After cleaning and it's doing the same, REPLACE it!!!
Luis Montalvo how did u check the codes with?
Por qué no vuelve a poner la junta que tenía en el interior?
DarthVader Jr 🖕🏿 😂
Why you dont block the EGR? Without EGR you have better MPG!
Not always true. On a lean-burn model such as VX or HX, the EGR is extremely important to getting good MPG. The lean combustion is fairly delicate and without the EGR, the car will add more fuel correct the higher flame temps.
+CivicNigga - If Automatic Fuel Injections... You can't :((((( But, if you have the OLD Carburetor Type... YES, you can delete it easily!
We're the pvc valve location
hidden above the oil filter on my 97 LX Civic D16Y7
Did the trick! Thanks
I can use WD 40 instead of the car cleaner correct?
You can, it will be smelly for a bit after Engine Burn.
wow, I have a same car same color just like yours that was doing the cleaning today, really wish that I could see your video and it would have made things easier to remove, one thing that I need to say, you didn't clean the EGR valve which is probably very dirty just like the passages, some people are sharing egr valve for other hondas on youtube and I just saw it, I'll do the cleaning soon, if you don't mind sharing the video about clean egr valve, that'll be perfect, thanks again for sharing this great video
nick is awesome.
Great Video thank you
thx a lot . that video gave me a lot of help
This would be safe to perform if your not a master in Automotive Engineering
Can not find the egr valve on a 96 lx civic ?
There isn't an EGR valve on a 96 lx
Thanks for the video! -I cleaned the gutters, the car spins the wheel in 3rd gear! under the top deck! -I hope you just left it out of the video anyway put it back! -Thank you pro!
Thanks Can yall come help me do mines. I'm a teacher and don't much about cars.
muy buen video
Blahh and with my d16v1 it's whole intake manifold off kinda job, I wonder why cars keep changing to worse what comes to maintenance.
Hey, what problems did you have and do they work now ?
Very helpfull thanks
Seafoam that shit! 15min an you done
Where do yiu put the seafoam ?
@@ratattckfunk9309 In his ...
y(^O^)y南無阿彌陀佛爸>NamoAmitabha88>南无阿弥陀佛爸>ナモ阿弥陀お父さんy(^O^)y