Construction will NEVER be the same with this new tool
HTML-код
- Опубликовано: 8 фев 2025
- These are a game changer for anyone that is in the trades. First seen at the 2024 World Of Concrete convention, these are the all new @DiabloTools snap lock SDS hole saws and mandrel quick change. The SDS plus is not yet available, but you can find the hex version in the link below and attached to the video in the shopping bag
You can also find the hex version on Amazon here amzn.to/3Txkh0H
Check out our website here www.toolreview...
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
#cooltools
We get the humor we think that things the way you put them are very funny and many ways😂😂😂😂😂 thanks for keeping the humor in the videos a lot of people when they get a lot of followers they lose their humor the best part about the video thanks for showing us the new inventions we really appreciate it😊😊😊😊😊😊😊
Looks very useful. It reminds me a lot of the Bosch Hole saw I already have for some time now.
QC is great... but you cannot stack the hole saws in order to center a new larger hole on an old small hole. Which can be super handy.
Wow, that's a great point 👊👊👊
Had the Bosch version with a 5/16 (or whatever freedom unit it is) shank or whatever freedom unit it is for ages. Works really well, but the collets do get very jammed and fiddly after they've copped some plaster dust, like on every construction site ever
Great presentation Clint! Thank you!
have a mandrel setup and it is fantastic
quick changes are great
I prefer my impact when drilling, including large holes. Instead of a drill wrenching your wrist if it binds up, the impact will just go into impact mode. Plus it's a compact set up.
Or get a new drill with a clutch/anti kick back.
@@AllTattedUp13 Why spend the money and take up space in the truck, when I already have a tool that does the job. I have several drills with clutches that only get used for small hammer drilling needs. The problem with the clutches, is they slip and stop drilling by design, the impact goes into impact mode and hammers through. If I were a plumber or an electrician it might make sense, but as a remodeling and home repair contractor the impact does the job perfectly for me. The impact is also compact, my SDS hammer drill is longer than 16" and won't fit in tight spaces or between studs. Impact for the win!
That's great, about time they come up with a new design. One of the problems with the old design is the hole saws get stuck on the mandrel, every freaking time.
*Just two things I would add to this new design, a few longer drill bits and cylindrical guides going on or replacing those drill bits. Guides to center new larger holes on smaller holes.
Great video as always. I'm amazed at how easily those Diablo (insert sound effect here) chewed through that $67,000 piece of lumber.
Go Clint!
The Man "Real Nass Like"
These are some cool tools. They look nice and heavy duty. I think I might buy one and try them out. Thank you flint!
🤣🤣👊👊
@@ToolReviewZone 😂😳
Amazing update! Thanks
Okay I'm shopping now on home Depot and we are very curious and have a question for you The snap lock 716 or the 3/8 which exactly are you showing in your video or do you have both up what were wondering about is which one to get for the bigger hole saw blades like 4-in to 6 in is this make sense we'd like to purchase the right one thanks again for showing us the new invention we didn't even know this was out there😊
Bro deeeeablo always coming out with good stuff. Great vidja as usual. Are you gonna do a full vid on those dewalt headphone/ speakers?
Ive been using the Sutton Tools Quick Release holesaws for like 10+ years now
Muy curiosos todos sus videos, gran trabajo, un saludo
I'M SOLD !!!!! I LIKE IT !!!!
I NEED TO GET SOME OF THOSE. BY THE WAY CLINT NICE CHOICE IN YOUR SDS.
Stephen 👊👊👊
Every time I hear Foxy Lady I see Dana Carvey doing the fox ears. Every time I read the word Diablo I hear Dieblo and the whip. Hek even my 5yo calls it Dieblo. Cheers brother
it is a nice system i hate setting up hole saw, always stuck never want to come apart
Definitely a pain in the ace 👊
from the looks of that board , you're having too much fun with that new tool.
Lol, so much fun 😁
Take 227
NOT NEW!!! Saw it last week on the TRZ YT channel. I always watch new videos on the TRZ channel. I ALWAY smeesh the like button too.😉
I can do better , I will do better 😪 haha, thanks for the comment and SMEEESH Krazomo
Usually, I can keep my drill-driver under control. It's that damned Hole Hawg that I throw back into the shop and tell them to give me a proper Right-Angle Drill. Far more leverage and a better clearance, Clarence, on the Head Depth.
And yeah, those look nice.
Now I need to get an SDS Head tool.
Nice One Clint 🤭
Yeah bosch or lenox made this system decades ago when I did hvac in the early 2000s. Dont know if they had an sds mandrel back then. I tried to use them, but the cost was high and I was a young struggling tech, so i got tired of changing mandrel adapters and went back to snap pin mandrels since they are universal. Spyders system is pretty nice too, as a kit they are priced well. I think my tct hole kit w tct pilot bit was under 100.
Bosch owns Freud and Diablo, i expect more things like this.
The system looks 100 percent like the Bosch one. This has been around for decades.
For Diablo, it's new
@@ToolReviewZone As soon as I get one, I'll test whether it fits together. 😉
Yup.....Bosch ones have been around for a while.....
I'm not sure if you say that it's new for the comments, but a-a. this is not new at all. not even the shaft.
Makita ezychange has a video about this exact design that is from 2009. It's a 15 years old video. Bosch progressor has one vid which is from 2015. Thats 9 years old. You could get them with sds-plus, 1/4 quick hex, 7/16 quick hex, 8mm regular hex shafts.
makita ezychange vid:
/watch?v=-T6_O26-YzY
ITS NEW FOR DIABLOOOOOO!!!!!!!!
Yep, never fails… watch your videos and I’m buying another tool! Thanks
Lol, sorry jk 😪
COOL tools!
That is the bomb
Look great but the 5/8ths stuff gets me. Why can’t we just do metric. Thanks for the demo though!
Holely mollie. Diablo gonna take all my money
🤣👊
Watched the video about 3 hours ago, went and got me a set! " gonna take all my money" too! 🤣
@@garyhamacher7444 🤣🤣💸💸
Diablo nice
The mandrel is the weak link. It can't take much heat and wears out quickly.
I think I like the Spider mandrel style better, but would be open to try these if they sent me a free one..
Interesting 😎⚒️😎⚒️😎
Great system. Thanks for the “nas” video.
Had a cousin get his thumb shattered & tossed off a roof back in the 90’s because there wasn’t a twist shut off on the drill he was using. Stay safe out there people.
It's no joke
Sweet
Real nice like
Can’t find the dang sds plus versions and the links are only for hex not even 1/4” whyyyy 😭
You can try to find Bosch PowerChange, Makita EzyChange or Hilti/Hawera adapters, they are the same.
So you're telling me I can't use this with my SDS Max 😢.
Look at it!!!😂
🤣👊
😮 that's real nice like!
Sorry clint it's a copy of Bosch Hole saw and it's been out for years , im on my third set .
Diablo is owned by Bosch. They may have this, but it's new to Diablo.
Bosch has had those for 20 years
Problem is you hit a nail it snaps them hole saws
They are built to go through nailer and metal as well
They fall inside walls. The mandrel comes apart. They are not new, Spyder did it first. Hopefully they did it better. It’s a shame, this is the only Diablo item that has failed in my usage
Appreciate the feedback 👊
I have the spyders, nvr had one fall off on me...yet.
Hey, it's not new, it's newfangled. 🤣😂
You are 100% correct Louis 🤣
😂 was sagst du. Das gibt's in Deutschland mindestens 12 Jahre... 😅😂😅😂
So what I gathered from the video is sand them down cause the paint will relocate to your boards if not? 🤣🤣🤣🤣🤣🤣🤣🤣
NEW
And excuse my ignorance don’t know what an SDS? Is.
REAL NAIS LAIKE
New for you..because you're not on the field,I've been using spider better cheaper than diablo😅😅to
😤Those are not new!
🤔Wait a minute is that a SDS?
🫣I’ve never seen that version before.
🫡Nice review!
🤣🤣👊