Sorry to hear that...Hopefully you can figure out what the problem is with it. Some things to check: did you flash the correct ESC type? (S-H-90 in my case)? Are you sure the problem is coming from this? (there could be something else stopping it from arming or throttling up). You could try connecting to Betaflight or checking your OSD for any error messages. It could also be worth trying to go back to an older version that you know works. In my case I haven't tried anything newer than 0.16 but I find that to work well.
There's probably been an update to the site since I made this video but it doesn't make a big difference, everything should still work just the same for you
After i flashed mine my drone is making some wierd noise and it kept slowly elevating with out throttle.. i had to disarm it in midair. Luckily it landed on grass. Brand new AOS 5.5 v2 with dji o3. The one who build it for me didn't finish the tune so it was vibrating alittle bit when i got it. Got recommended to flash it on 24hz. He had it on 96 😅 now im afraid to touch anything or to fly it. Any idea what it could be?
@@megiMove could be the new version... folks complaining about 0.17/18/19 and been flasing back to 0.16 I'd suggest u set the tune back to defaults to see if it's a mechanical fault causing undue vibrations or not, check it all over, tighten all bolts... make sure nothing is rattling onto the FC... really shouldn't be flying away unless ur pids are jacked up... the complaints about newer firmware a desyncs not fly aways.
Ryet9 makes some very good points and you probably don’t want or need 96 on a 5” anyways. 48 is usually more than enough. So yeah, try the default BF tune if 48khz doesn’t work either and definitely check for loose bolts and wires. Good luck!
Good one. Thanks, man
Thank you! Glad it was useful.
Flashed my moblite 7(only update firmware version)and now motors don't spin anymore,went back to the factory settings and still nothing.
Sorry to hear that...Hopefully you can figure out what the problem is with it. Some things to check: did you flash the correct ESC type? (S-H-90 in my case)? Are you sure the problem is coming from this? (there could be something else stopping it from arming or throttling up). You could try connecting to Betaflight or checking your OSD for any error messages. It could also be worth trying to go back to an older version that you know works. In my case I haven't tried anything newer than 0.16 but I find that to work well.
Thanks bro .. I'am less lost 😂😂
No problem, glad it helped 😆
New subscriber ** Love the video brother ✌🏼 thanks for sharing 🤙🏼 blessings from #islandfpv 🌴
Thank you so much man!👍I hope it was helpful, and greetings from up north
For me, it IS not written "read setup" but "read settings" 😤
There's probably been an update to the site since I made this video but it doesn't make a big difference, everything should still work just the same for you
...needs to be 14mins longer 😂
It's so simple, I don't know why all the tutorials are 15 mins long 🤣
After i flashed mine my drone is making some wierd noise and it kept slowly elevating with out throttle.. i had to disarm it in midair. Luckily it landed on grass. Brand new AOS 5.5 v2 with dji o3. The one who build it for me didn't finish the tune so it was vibrating alittle bit when i got it. Got recommended to flash it on 24hz. He had it on 96 😅 now im afraid to touch anything or to fly it. Any idea what it could be?
@@megiMove could be the new version... folks complaining about 0.17/18/19 and been flasing back to 0.16
I'd suggest u set the tune back to defaults to see if it's a mechanical fault causing undue vibrations or not, check it all over, tighten all bolts... make sure nothing is rattling onto the FC... really shouldn't be flying away unless ur pids are jacked up... the complaints about newer firmware a desyncs not fly aways.
Ryet9 makes some very good points and you probably don’t want or need 96 on a 5” anyways. 48 is usually more than enough. So yeah, try the default BF tune if 48khz doesn’t work either and definitely check for loose bolts and wires. Good luck!