Great video bro!! I have the same car like yours so now I am not worried fixing it. I will just watch your video if anything breaks down. Btw what’s your location?
@@AliMECH I was having trouble with my 1999 Ford ranger with a 3.0 Flex fuel with 120k miles. Cylinder number five misfire. I had did a smoke test on the vacuum system, compression test, install new spark plugs, along with wires and coil pack and the issue was number five cylinder injector Ohm value was way off. I had the other five injectors, professionally cleaned, tested with new O-rings installed, and I just put everything together a couple hours ago. Running well. ! 🤙
I have a 2011 camry this might be my problem my traction control light comes on with check engine light flashing with misfire. I changed the plugs and ignition coils so im gonna try replacing the fuel injectors to see if that fixes the problem
hey man amazing vid, question you stated carb cleaner is the best clean to the injector. so is it possible to run the carb cleaner from the canister too?
I tried making the diy connector as per your previous videos. Neither superglue nor the gluegun glue would hold the straw and the cleaner would leak from side of the straw
Alimech has an older video where he showed how to put this together. Use a flat washer that can help “hold” the glue (in the fuel line) while glue is still a liquid. This way, you can really load with glue, maybe 0.5 inch long in the tube. Once that cures, no leaks.
My brother, you love wasting money on these snake oils. Why your camery producing so much carbon? I think it's time to get checked properly rather than waste money on these 🐍 oils
It's not wasting money, this car is in iraq, and the gasoline quality it very bad and the gasoline purity is very bad too, not only other ppl see how it looks like when the injector is bad, bit I also show them how to clean it at home
Awesome tutorial that anyone could follow. Will be coming back to check out your other videos!
Awesome, thank you very much
You've just earned a subscriber!
Appreciate that, thanks
Well done. Thanks for all your tips!
Great video bro!! I have the same car like yours so now I am not worried fixing it. I will just watch your video if anything breaks down. Btw what’s your location?
Excellent job
Thanks
I like the way that you think. 🤙🤙🤙
Thanks
@@AliMECH I was having trouble with my 1999 Ford ranger with a 3.0 Flex fuel with 120k miles. Cylinder number five misfire. I had did a smoke test on the vacuum system, compression test, install new spark plugs, along with wires and coil pack and the issue was number five cylinder injector Ohm value was way off. I had the other five injectors, professionally cleaned, tested with new O-rings installed, and I just put everything together a couple hours ago. Running well. ! 🤙
I have a 2011 camry this might be my problem my traction control light comes on with check engine light flashing with misfire. I changed the plugs and ignition coils so im gonna try replacing the fuel injectors to see if that fixes the problem
What’s your opinion on Transmission flush/ drop and fill for an enclosed 2010 Camry
Hello, what is the fuel line tube size?, I haven't found the right line for the adapter, thank you
hey man amazing vid, question you stated carb cleaner is the best clean to the injector. so is it possible to run the carb cleaner from the canister too?
Thanks, yes I did that before too, it works so well actually
How would you use this on a audi a4 2008 2.0 where do you connect the connector. Is it to the fuel rail fuel line ?
Hey brother could you do a vid on how to clean the PCV valve on a 2010-11 Camry since they have a power steering pump that’s in the way?
بژیت مامە عەلی زۆرم پێخۆشە کوردیش میکانیکییەکی زیرەک و لێزان و دەقیقی وەکو ئەجنەبییەکان تیایە، هەر بمێنی
Zor supas bo to ka rat la eshakanma ✌️🙏
Awesome bro 😎
Thanks
Hey Ali, where did you get the fuel rail female connector? I'm looking for one that fits my mitshubishi outlander 2012, 2.4 , 4b12
It's all included with this kit
Autool C100 Car Fuel Injector Cleaning kit: s.click.aliexpress.com/e/_A5GRq9
I tried making the diy connector as per your previous videos. Neither superglue nor the gluegun glue would hold the straw and the cleaner would leak from side of the straw
Alimech has an older video where he showed how to put this together.
Use a flat washer that can help “hold” the glue (in the fuel line) while glue is still a liquid.
This way, you can really load with glue, maybe 0.5 inch long in the tube. Once that cures, no leaks.
Waiting for a method to clean diesel injectors please 🙏🙏🙏
Up this! Eagerly waiting. Without removing as well
👍👍
🙏
The canister should be clear so you can see how much liquid is left in the bottle
من وين تشتري الseafoam
ACE
I run 88 octane ethanol free, zero probs like this same car
My brother, you love wasting money on these snake oils. Why your camery producing so much carbon? I think it's time to get checked properly rather than waste money on these 🐍 oils
It's not wasting money, this car is in iraq, and the gasoline quality it very bad and the gasoline purity is very bad too, not only other ppl see how it looks like when the injector is bad, bit I also show them how to clean it at home