How to replace the alternator in a 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 Toyota Corolla
HTML-код
- Опубликовано: 29 авг 2024
- In this video I show you how to replace the alternator in my 2006 Toyota Corolla. I have other videos about my 2006 Toyota Corolla on my channel. If you are interested and have time, please check those videos out. Thanks for watching!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
2003 to 2008 Toyota Corolla Alternators on Amazon(Verify Correct Alternator For Your Vehicle) - amzn.to/3IqcoER
2003 to 2008 Toyota Corolla Serpentine Belts On Amazon (Verify Correct Serpentine Belt For Your Vehicle) - amzn.to/3YdjgLy
Serpentine Belt Removal Tools On Amazon (Verify Has 19mm Socket) - amzn.to/3YektCd
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.
A little tip that has helped me: have a zip tie handy when you take the belt off the alternator pulley. Zip tie the belt to something nearby so there's constant tension on the belt and it doesn't slip off the other pulleys.
Thanks for the tip, saved me some curse words!!! 👍
@@mikeclontz5774 You're very welcome ,wow, I didn't realize my comment got so much attention. Cool!
this is a really smart tip...
Thank you.
Or a bungee cord.
Dude, thank you so much for making this video. I found it last night, watched it a few times since then and knocked the whole job out this morning in just a couple hours.
You saved me a ton of money and I gained some much needed car maintenance knowledge. Keep it up!
I wouldn't consider myself a mechanic by any stretch of the imagination but I can follow directions well and your video was well done. I appreciate that you did a step-by-step, including needing to disconnect the battery. I also appreciate that you provided a difficulty scale and stated all the tools/sizes required.
Thank you for your help and God bless!
Yeah this is exactly what I need! Idk what I'd do without RUclips and people who film these. Probably be flat broke by now
Thanks for watching!
Great job and thank you Sir!! I have an 2007 and just got done replacing my alternator. Your video was extremely helpful, except when your head got in the way haha jk.
Thank you again and great job to us all who was able to do complete this project on their own!! $580 dollars saved woot!!!
My usually films those for me. I found out thre hard way when I tried by myself! Glad it helped you!
I have the same year, just replaced the battery less than a month ago and while driving home yesterday, the bettery light came on. I'm thinking it is the alternator, had the car for 12 years and I have over 200k on it. This video helps a lot!
Thanks for the video. I wanted to point out that you don't need to rent the special belt tool. I tightly fit a normal socket into that space and just put a metal pipe on the wrench handle to extend it and give me more leverage. It didn't require as much force as I thought it would. Be careful with that belt it unraveled on me and I had to slip it back on towards the back. By far the hardest part of the job was "birthing" out the old alternator.
Thanks for watching and sharing your info.
Replacing the belt with a new one is a challenge. Only because of the tight space you have to work in. A special tool is not needed to release the tension on the belt. A 1/2 drive rachet and 19 MM standard size socket will work to release the tension so the belt can come off the alternator pully. I used a short pipe for added leverage on the end of the rachet handle to make the job a bit easier. This job will take about an hour. It is relatively simple to do. Two bolts and a few wires to disconnect as well as the belt removal off the alternator pully. I have done this job on other vehicles that is way more time consuming. Side winder engines are for the most part, more difficult to work on because of the tight space between the engine and body of the vehicle. Good video, thanks for sharing.
Taking the engine cover off helps overall to see and move even though it's not directly in the way. 2 -10mm nuts. It's just a 10 second no brainer move
Hi Mike, and thanks for watching and providing your feedback!
Great instructional video! I replaced mine in about an hour based on this. Excellent!
Thanks to you Mr. sir I changed the alternator myself and didn’t have to pay some dork mechanic to do it. A million thanks to you 🎉
Great video! 14:00 for anyone that just needs the recap/overview.
Thank you for the video. I have a 2003 Toyota Corolla LE with 283,999 miles and I'm looking at your video to see the parts under the hood.
thank you for explaining so good, it will be a good idea how you put the belt back, please
thank you for your video. i have been working on cars as a DIY, and i examine how should i proceed with removing the alternator on my 2004 toyota corrola ce. your video would be a big help for those who had no clue as to do the job.
Thank you for the feedback and for watching!
Convient time to install new thermostat when altenator is out.CHEERS from Westcoast Canada!
Great step by step video. New alternator on 2008 Pontiac vibe basically the same setup.
Hi Braxton, thanks for watching! I'm glad this video was helpful and thanks for the feedback.
Thank you sir for making this video it was a big help with my car, for the torque specs I tightened mines at( top bolt 18ft pounds and the bottom bolt 40 ft pounds)
Thank you for this video. It helped me a lot and I was able to remove & replace my alternator this past weekend.
Awesome! Thanks for watching! Glad it helped.
Thanks so much for the walkthrough! We had a bit of trouble identifying what side the clip was on for the small metal piece but we managed it. All in all a great video, thank you! 👍
Thanks for watching. Glad you got it!
nice video bud ,helped me change my 2006 matrix alternator today saved myself a lot of bucks ($350 ) new alternators at napa are 300 bucks here in canada got one a junk yard for $60 thanks again
Awesome glad you got it done yourself!
Thank you for this video btw. If I don't use it to fix my car over the weekend, hopefully it's just a bad battery y'all lol. I'll come back when the alternator break and use this video
Thanks for watching, hopefully you don't need it but if you do its here to help.
@@ToddsGarage thanks for the well wishes and I change the battery. That got rid of the check engine light I've had sense I brought the car. Now the car idle like a new vehicle. Thanks and have a Merry Christmas. Hope I'm not back before then 😂
@@18matts Merry Christmas as well to you!
Thank you for your video! Really helped on my wife's car.
Thank you im glad it helped!
It's a real easy swap . If you cannot get that tool use a 19 mm or 3/4-in socket with a swivel head with two long extensions. The frame of the tensioner has a welded bolt on it . Put you socket on that a pull to you. I swapped mine out and about 45 minutes the whole job.
Working on the car in that small space was crazy! I just don't understand mechanical engineers when they make a car they should make it so that people can work comfortably when doing automotive work. Tip: Don't need to replace alternator just replace the alternator brush holder that way you save money!
Thanks for watching, appriciate it! Small hands are good in automotive work!
@danielmendez
Why just the alternator brush holder? I have a battery light on my dashboard and I ruled out all other possibilities. Should I change out my alternator or just the brush holder?
@@Wandji18 I bought a remanufactured alternator and that too wasn't no good. The voltage regulator went off and they're just as expensive as a new one. So I replaced it with a new alternator - always better to get a brand new one cuz the remanufactured one blew out my alternator 100a fuse and that was just more work for me. When my alternator fuse went out everything went out - no lights nowhere, no radio, A/C not even the wipers I couldn't even get the car in gear but the engine would turn on. Unfortunately, the alternator wasn't producing any voltage! Car is working fine now with new alternator!
Thanks for the Detail Guidance
Thanks for watching!
Hey amazing video everything worked perfect I changed everything !!! Thank you !!!
Thank you so much for watching and the feedback!
I tried taking that bottom nut off and only managed to strip the hell out of my socket... So time to figure something out. Thanks for the video though it was great help
O no sorry to hear that. Good luck., let us know what happened.
Borrowed my grandfather’s bigger socket wrench and that finally managed to get the thing off. I guess I just had a bad socket or something.
@@charizard1802 the same problem is happening to me right now even had a road side guy come through and usxe like 6 different tools but its stuck
maybe taking the belt off first will help it come off
I'm having the same issue, except it's the bolthead that's stripping. I bought a set of sockets that are supposed to be made for removing stripped nuts/bolts, and a bigger socket wrench for better leverage, but I feel like I'm still just making it worse. I don't know what to do, I want to avoid bringing it to a shop if at all possible, but at this point even if I did, I'm not sure if they'd be able to fix it either.
God bless you sir 🙏
Thank you for watching!
Great helpful video
Haha I broke my breaker bar and 19mm socket because I was pushing the tensioner up instead of pulling it towards me 😂😂😂 oops
lol I worry that I will do that
Thanks needed the info for the serp belt.
Absolutely brilliant video and well presented
Thanks for watching! Appriciate the feedback!!
You the man thank you
Thanks for watching.
Great vid, at least it isn’t as bad as a Lexus alterrnator and starter. On the sedans you have to go under the manifold to get some hidden screws
Thanks for watching, I Appriciate it!
Thanks!!
Thanks, it worked better that I thought
Thanks for watching!
Thank you for the awesome video and tips
Thanks for the feedback!
Thanks very much 👍🫡
Thank you buddy, you really helped me out.
19mm socket = 3/4" socket
🤯
Very cool had mine removed thanks to your video 💯🏆🙏🏻
Thanks for watching, I'm glad the video helped!
I believe this should work on all or nearly all 1ZZFE engines: 2003-2008 Corolla, Matrix, and Pontiac Vibe. Possibly Chevy Prizm as well?
Looks tight😮💨
Most 2004/5/6 models have a bearing problem with the manual gearbox and the timing chain sensor, cost to repair about $4500. After 120 miles or 200 kms
Thanks for the video Sir
Thank you appreciate you watching!
Thanks u just save some $$$$
Awesome glad to hear that!
Awesome video thank you so much
What brand would you recommend?
Hello I have a question in reference to your video how did you know that you needed a alternator for your car ? I’m having the same issues with mine I have a new battery new starter in my car still won’t start so they’re thinking it’s the alternator
Hi thanks for watching. I'm my case I had a new battery and it was not getting charged while I drove, so I knew the culprit was most likely the alternator. I had taken my battery to the auto parts store near me and they tested it so I knew it was OK. Did your battery light in the car come on? Good luck, hope you get it figured out.
Remove the radiator fan assembly. That will open up the area big time.
Hi Todd, I have the same car and I wanted to say that your videos have been really helpful and to the point so it makes it easy to do the work. I was wondering at some point if you could do videos for changing brakes, engine coolant, brake fluid ? Mine is a 2008 Corolla and I don't have quite as many miles as you so I'm trying to make it last. Admittedly I am over 100,000 miles and have not changed transmission fluid ever. Is it a good idea to just leave it ? Thanks for your vids !
Thank you for the feedback. I hope to make a few videos this summer. I had to make the alternator video in the winter because it gave up on me! Transmission fluid does need to get changed out. Do you have a manual or automatic?
@@ToddsGarage Hi Todd thanks for the response, sorry I did not check RUclips for awhile. I have an automatic.
Just undo the bolt like you were doing an oil change, let it drain into your neighbors yard, refill through dipstick
Hi, I was told my alternator was bad, so I ran the basic test of running car and removing the positive cable from battery; car stayed running. Please advise, I don't know what caused my car to stall in the middle of the road?
hi, I am not sure of that test or it's accuracy. Also is a bad idea to mess around with the cables or battery while car is running. Unfortunately it could have been so many different things! Usually auto parts stores will test the battery for free. I would start there. Good luck and let me know what you find out!
Hello, does anyone know the name of the bracket he took from the old alternator to put in the new one?
A 7 or an 8 difficulty... LMAO that's hilarious. For beginners this is realistically like a 3 or 4. When you move to things with gaskets and stuff that really needs to be torqued to spec and bolted in a certain pattern is more like a 7 or 8. Just my opinion though lol! Other than that great job man, and props on doing that in the snow! Wouldn't catch me out there in that weather working on a car. Dropping a like on your vid too.
Car died yesterday jump started it it started got it home tried to start it later it didnt go it started this morning jus fine. Got a replacement with the the warranty started fine after it got changed. Got it back home ate real quick tried to start again and no bueno it doesnt even make a sound when trying to start
Do you get lights or anything on the dash?
Ya the lights came on but not sound
Some power not all? My guess is the belt didn't get put back on correctly or the battery is the issue. Seems like the battery had a full charge and allowed you to make the 1 trip. I would check the belt. If that looks good have the auto parts store test your battery. Usually they offer that as a free service. Let me know what it was and good luck.
@@ToddsGarage ya im going to have it tested we jus had the belt changed last year but going to test. And thank you will do
@@ToddsGarage it was a bad starter. Came out of pocket a lil but got it fixrd
My belt is shredded. Is the replacement of that pretty straightforward while replacing the alternator?
Please.... anyone know where to get that replacement metal clip? Right towards the end where he put it on with an 8mm. So they sell just that tab?
Thank you very much for the help!
Thanks for watching! Appriciate it!
Thank you that help me alot thank you
Thanks for watching! Appreciate the feedback.
When i atarted to put the battery back on it started to spark and my fuse blew out, what caused that. I connected the alternator back the correct so my head is scratching on this one.
Todd: Any suggestions here? I helped my son in law replace serpentine belt (and radiator and thermostat) and doing so he took the alternator completely out. But when we put it back in (same one; he just removed it in order to get the belt on and make changing the thermostat easier) and hooked everything up again, we had a very strange ailment: nearly all things electric with the car stopped working. No lights, no electric windows, no gauges, no speedometer, park-lock thing wouldn't let gearshift go out of park, etc., etc.
One thing we did wrong: forgot to disconnect battery first. Could that have blown something? What do you think went wrong? Fuses seem OK.
Hi, thanks for watching. Just a guess but sounds like alternator problems. Does it idle ok or is the idle rough? You might also double check the serpentine belt to make sure its on there correct and snug. Maybe coincidental maybe something happened when it came out. Good luck hope you guys figure it out. Also I would go have the battery tested at an auto parts store to see what the condition is. Curious to hear what it was!
@@ToddsGarage Thanks, Todd. My son in law reports this morning that it was a blown alternator fuse (probably caused by not disconnecting the battery first -- stupid rookie mistake).
I should have taken pictures before I started. I change the alternator. But, I forgot if there is a connection for the eighth mmmm bracket that you show at 12 minutes. Is there a connection there? Or is it just a harness for one of the wires?
Hi, did you get it figured out?
You did your best man thanks
Thanks for watching! Appriciate that!
Thank you, we only saw the hood and your hand
So when you’re taking the belt off, does it re tension the new belt? Or do you need to tension it to a specific torque?
Thanks for watching, you pull with the belt tension tool to loosen the belt and when you slowly release the belt tension tool with the belt in place it will automatically go back into place with proper tension. Good luck if you decide to try it.
Great job for back yard mechanic
Thanks for watching and appreciate your feedback!
Can you link the video to removing the fan shroud?
ruclips.net/video/i8UBhZJYqFo/видео.html I show it in this one. Good luck!
Todd's Garage you’re the best, thank you!
It's a connector and 2 10mm bolts, it is easy to remove and gives you plenty of space, but I am not sure if you can completly remove it or just hang it from a hose. Anyway if you replace the starter, removing the fan rack is a must!
Thank you buddy
Thanks for watching, I am glad the video helped.
@@ToddsGarage it did help a lot buddy I’m the one who screwed up that top screw I cross threaded and broke off I couldn’t get it to line up for the life of me ..
@@ToddsGarage subscribed buddy !
@@hermyherm365 hopefully all turned out OK. Thanks again for watching.
@@hermyherm365 thanks for the subscription, I appriciate that!
How do you know that the alternator needs to be replaced? Are there any warning and symptoms of a bad alternator?
Yeh, you can check the battery when car is on, should read like 13.6, or the battery light comes on but your car still starts
Was the car completely dead or did it click? My 2006 Corolla is completely dead after a massive spark (i didn't hook the cables up backwards, my dad tried to direct connect it to his truck and it went completely dead after)
Hi and thanks for watching. My car broke down on the side of the road the lights were flickering and then the car just started to turn off. I had to have it towed home. I hope you are able to get yours fixed. Thanks again for watching!
What is the name of the tool you rented, the thin bar? I can't find that anywhere.
Its a serpentine belt removal tool. They rent them at most auto parts stores. Good luck!
@@ToddsGarage thanks for the quick reply!
@@ToddsGarage thank you
@@martianman1264 hope you got it!
If it is a 1-time replacement, I will take it in to a 'service center' to replace the alternator and belt. At 293K trouble-free miles in a 2000 Corolla and no car payment for 15 years, it is not worth doing for myself. And it is early August so I have more months of heat and humidity in VA, so it's a good time to get it fixed. Battery Light 'on' w as the clue and the battery showed fine and the alternator starting to fail.
Literally takes 15 mins and serp belts are ridiculously easy to replace
belt will most likely be fine till Spring
Thanks for the feedback. I'll let you know.
Where did you rent that special tool from ??
What’s the torque specs for the two bolts
Tight and tighter
Whoa dude!! You put 250,000 miles on an alternator & a belt?
Michael Mace toyota corolla, durable
300k before mine died today
Hey Todd,
Just bought an 06 corolla. After a couple days, it seems to be dead. Battery drained but is relatively new. Do you think it’s the alternator or something draining the battery?
Did it die slowly or just stop suddenly?
@@ToddsGarage died slowly.
@@harima7757 did you ever figure it out? I would get the battery tested first and go from there. Good luck
@@ToddsGarage thank you I will try. I've had a crazy week to be honest. My mom crash the day before I got stranded at the bank. And I left the car there for a night and I forgot to lock the door in the whole trying to fix it. And they stole my subwoofer lmao.
At 12:50-13:00 what is the name of that little metal piece that wasn’t included on the new alternator? I returned my old one without salvaging the little metal piece and I’m trying to find it online
Any answer? I cannot get mine out. The nut is stripped.
On the freeway, damn!
Luckily I had roadside assistance so the tow was free. Thanks for watching!
@@ToddsGarage thanx for responding, i have heard stories of how unforgiving bad alternators can be.
good repair
Thank you for the feedback! Good luck on changing yours!
Why not tell us how long an alternator lasts that we can replace them before thay go bad instead of how to replace?
I'm in a pickle. My 06 Toyota has been sitting for months.The brand new battery is completely dead, only a year, maybe a year and a half old. Im getting a new battery but just in case it's the alternator In watching this.Have no money for a mechanic so hopefully this works.I just wish there was a way to decipher if it's the battery or the alternator.
Hi and thanks for watching, some of the auto parts stores will test your battery for you so you can verify if it's good or bad.
@@ToddsGarage Thank you so much!
What engine is this
Ok what about if the tensioner does not move like it's supposed to?
Hi Eric, thanks for watching. I would first start with verifying I was on the correct bolt, there are a few in that area. If I was on the correct bolt and it wasn't releasing the tension it would make me think there is an issue with the tensioner pulley. Hope you get it fixed, let us know!
just for info, why there are 3 wires on alternator?
You can Google this, will give you a better explanation than I can, thanks for watching!
@@ToddsGarage you can try atleast
The peice he was taking off with his head covering it is the one connector I cant seem to figure out how to get off lol
Sorry my wife usually does the video! I do talk about it towards the end of the video around 14;40. Good luck and let me know if you get it.
I had the same problem Haha
Hope you got it!
i left it connected until I got the alternator all disconnected but that, and was able to rotate it to a better viewing angle. I figured out how to remove it at that time. How anyone did it before I have no idea. Now on to the same infamous metal connector on the alternator. There is no way it's coming off the old one. I cannot image replacing it after you've re-installed the new alternator.
Ah - cold chisel and big hammer all better now.
250 thousand miles out of a belt and Alternator. Can't complain about that.
Thanks for watching! Has been a good car!
Always! I have an 05. Love it
PS. I did take the motor cover off to make more room. Only 2 nuts.
where did you buy alternator from?
Hi got this one from ORielys Auto Parts, thanks for watching!
Whats the name of the tool you rented for 40 bucks?
Hi and thanks for watching! It is called a serpentine belt tool set. Thanks again for watching!
You really don't need one, just use a socket wrench and a crescent wrench, with your arm it forms the holy Trinity
the rental didn't give me 19mm. Looks like I will have to improvise
Hopefully you have a 19 inch in your toolbox you can use. Good luck!
@@ToddsGarage i do not. trying to borrow from a friend and then rent it again. Car door flickering on the dashboard so much, I had to change alternator.
@@ToddsGarage i got it done. Went above and beyond and change the belt. It is great now.
@@kack7130 awesome glad to hear it!
Alternator is $200.00 today.
$139 at summit for a reman
@@nsfjojo It's a Toyota. I won't put used parts on it. The car will last the rest of my life. LOL
@@arthurh4484 lol i do and im at 300k miles
113k and need alternator and injectors!
Good luck with both projects!
Car always break in bad weather.
How did you know you needed to change the alternator and it wasnt the starter to be replaced?
This was a while ago but I believe in my case there was no power and I got the battery tested and it was OK. Good luck figuring out your issue!
get rid of theses damn ads
you're not a credible source. ):