Honestly, this is probably one of the best audio videos on RUclips because it's so simple and you actually take people through it and it's not like super complicated so thank you
I paid for a darned online course about Final Cut Pro and they didn't describe sound editing nearly as well as you do in this video. You are awesome!! I have learned to always go to your RUclips channel whenever I am seeking guidance about FCP. I just wish you were my neighbor.
I have a track with music, and it keeps moving to the dead bottom of my timeline below all the dialogue, which is frustrating because I want to edit the music (add waypoints) but I can't move the track that has music up (closer to the images). When I try to "nestle" the track with music above the dialogue, it just keeps sending it to the bottom. Can't find a solution anywhere, so frustrating.
It sounds like you have roles turned on. Check out the end of this video for more info on roles. ruclips.net/video/lIoychycF8w/видео.html. You can re-arrange the order of your audio tracks.
Literally all I’m trying to do is delete the audio track (which is its own separate audio track that I imported) but when I select and delete the audio it deletes the clips too???
Hallo, sorry my english is not so good. I watched your video, hoping that one of your 3 "solutions" would help me, but they did not. Maybe you know what I have to do. In the old version of FinalCut I also could synchronise some clips. When I synchronised 10 Clips, 4 of one camera, 5 of the second camera an the whole audiorecording (of a concert, for example) then I got in the timeline, the audio"layer" ond over it all the videoclips extra, sometimes one over the other, but all on the right "audioplace". (I hope you know what I meen?) So it was easy to cut and mix. It was possible to put the audio from the camera together with the extramicrophone-recording. It were the same steps as you show on you video - but the result was very different. Now, when I do the same, I get one "layer", where all clips are cut together, the audio is only from the exrtamicrophon and the other audio is gone. When you say, I can find the right place, for the video, by hand, thats funny with one video, but not with 10, or 27 as I have in my project. I would be happy, if you can help me. Martin
or you can just enable loudness effect in inspector and tweak it to your liking and then possible enable voice isolation in noisy environments - boom, you' re done
The entire internet says to do -6 for talking head and everything else. I think 99% of youtube has music to loud. I prefer the music like -25 will try next edit with talking with -10 in next video. Your compressor stuff is pretty advanced lesson. WIll get there one day. 1 tip for yall is to go slow and have pauses, I know it hurts retention, but your in the teaching space. Algorrythem knows when people are happy!!!!!
Yes. That's right -6 for talking head especially for videos uploaded online like RUclips. Yeah, I noticed that too. That's probably caused by improper speakers/headphones. Thank you for the tip. We'll take note of that.
@@StupidRaisins You said to make the video -10 to -12 on sound. Nothing in the video says -6? Alittle bit of curve ball there, but right on the music depends on the track too. ruclips.net/video/Wl5CQwmG3uc/видео.html I pasted the best photo shop guide on the youtube, copy his style with pauses. I rewatched that 3 hour video 5 times to get the basics. WOuld fully do same for your FCP guides, at the end glue all the video's together
there's no point in doing any minus on audio for RUclips. You can normalize to zero - meaning peaks peak at 0db. That will be as loud as it gets without distortion and signal to noise will be best. Period. all those minus tricks come from old time analog tech
Hey Dylan, thanks for the video! Our mixing board gave us some major problems this week. Throughout the entire video there are these annoying pop noises. Even with the audio turned down the spikes are always there. I can't find anything in the Audio Levels that will get rid of them. I didn't try every single one but do you have an idea what might help? Thanks! Blue
Honestly, this is probably one of the best audio videos on RUclips because it's so simple and you actually take people through it and it's not like super complicated so thank you
You're welcome! Glad I could help.
Great video! Many thanks! 🙏
No problem
Your video I still need after 3 1/2 years of FCP! THANK YOU for doing this when I really need it!!!!
No worries.
This is such a great tutorial. Very clear and easy to follow. Thank you for sharing.
Glad it was helpful!
Thanks Dylan. Very rare and useful auto on sound effects in fcpx !
You're welcome! I'm glad you like it.
I paid for a darned online course about Final Cut Pro and they didn't describe sound editing nearly as well as you do in this video. You are awesome!! I have learned to always go to your RUclips channel whenever I am seeking guidance about FCP. I just wish you were my neighbor.
Maybe we are neighbors. Where do you live?
Great bunch of audio tips, all annotated and saved for the next editing session...
Glad it was helpful!
Using the Channel EQ on the music when someone is talking is a game changer for me!!!!
Woohoo!
Great tips! Thank you very much for the tutorial!
Glad it was helpful!
this is perfect, I've searching for something like for sooo long. you sir got a sub. well done and tyvm
Thanks for the sub! Glad I could help.
just the video i was looking for
And you're just the comment I was looking for. Thanks!
Helpful!thank you a lot
Glad it helped!
Thank you, very helpful
Glad it was helpful!
helpful! Thank you a lot!
You're welcome!
good advice overall, but your sound samples were not easy to hear.
Thanks for watching. I'm sorry the sound wasn't easy to hear. I'll make sure to turn it up next time.
this demonstrates that no matter how much you tweak you cannot improve a recording thats initially done bad in an echo-ey room with a poor mic.
Sorry about this.
Thanks for the feedback.
I have a track with music, and it keeps moving to the dead bottom of my timeline below all the dialogue, which is frustrating because I want to edit the music (add waypoints) but I can't move the track that has music up (closer to the images). When I try to "nestle" the track with music above the dialogue, it just keeps sending it to the bottom. Can't find a solution anywhere, so frustrating.
It sounds like you have roles turned on. Check out the end of this video for more info on roles. ruclips.net/video/lIoychycF8w/видео.html. You can re-arrange the order of your audio tracks.
thanks , good video ! how do you open the compressor window ?
I press command + spacebar and type "Compressor" and then Enter to launch the app.
@@StupidRaisins i found a better way . Double click thé Icon of the compressor on left of the effect in the inspector
@@StrravigorNice!
Literally all I’m trying to do is delete the audio track (which is its own separate audio track that I imported) but when I select and delete the audio it deletes the clips too???
Sounds like you're selecting the audio track that's part of a video clip and so it deletes everything. Can you show me what you're doing?
@@StupidRaisins I figured it out it’s just shift delete. Thanks
Cool!
again, making adjustment but without explanation.
What do you mean?
Hallo,
sorry my english is not so good. I watched your video, hoping that one of your 3 "solutions" would help me, but they did not. Maybe you know what I have to do.
In the old version of FinalCut I also could synchronise some clips. When I synchronised 10 Clips, 4 of one camera, 5 of the second camera an the whole audiorecording (of a concert, for example) then I got in the timeline, the audio"layer" ond over it all the videoclips extra, sometimes one over the other, but all on the right "audioplace". (I hope you know what I meen?)
So it was easy to cut and mix. It was possible to put the audio from the camera together with the extramicrophone-recording.
It were the same steps as you show on you video - but the result was very different.
Now, when I do the same, I get one "layer", where all clips are cut together, the audio is only from the exrtamicrophon and the other audio is gone.
When you say, I can find the right place, for the video, by hand, thats funny with one video, but not with 10, or 27 as I have in my project.
I would be happy, if you can help me.
Martin
Double-click the "one layer" and you should see all the synced clips.
@@StupidRaisins
I´ll try this - thanx !!
- - - - -
Danke, this works perfect !!
Super - you are a hero !
@@panzamartin You're welcome.
or you can just enable loudness effect in inspector and tweak it to your liking and then possible enable voice isolation in noisy environments - boom, you' re done
Thanks! This can be a lifesaver sometimes but doesn't always work 100%.
The entire internet says to do -6 for talking head and everything else. I think 99% of youtube has music to loud. I prefer the music like -25 will try next edit with talking with -10 in next video. Your compressor stuff is pretty advanced lesson. WIll get there one day.
1 tip for yall is to go slow and have pauses, I know it hurts retention, but your in the teaching space. Algorrythem knows when people are happy!!!!!
Yes. That's right -6 for talking head especially for videos uploaded online like RUclips. Yeah, I noticed that too. That's probably caused by improper speakers/headphones.
Thank you for the tip. We'll take note of that.
@@StupidRaisins You said to make the video -10 to -12 on sound. Nothing in the video says -6? Alittle bit of curve ball there, but right on the music depends on the track too.
ruclips.net/video/Wl5CQwmG3uc/видео.html
I pasted the best photo shop guide on the youtube, copy his style with pauses. I rewatched that 3 hour video 5 times to get the basics. WOuld fully do same for your FCP guides, at the end glue all the video's together
there's no point in doing any minus on audio for RUclips. You can normalize to zero - meaning peaks peak at 0db. That will be as loud as it gets without distortion and signal to noise will be best. Period. all those minus tricks come from old time analog tech
@@sunlit777 Thanks makes more sense than the guy making the video. In the video he calls for -10 then agree's that -6 is ok?
Hey. Sometimes I mess up.
Hey Dylan, thanks for the video!
Our mixing board gave us some major problems this week. Throughout the entire video there are these annoying pop noises. Even with the audio turned down the spikes are always there. I can't find anything in the Audio Levels that will get rid of them. I didn't try every single one but do you have an idea what might help?
Thanks!
Blue
I found this. Does FCP have something like it? Start at 2:08 ruclips.net/video/r5ki_fo2rlk/видео.html
I think Izotope plugins work with FCP. Also check out crumplepop.com/ plugins.
@@StupidRaisins thanks, I’ll check it out. I’ve been having glitches with audio cutting out using izotope.
Good luck!