Hi! great video! I´m using a F4R that came from a sandero rs, which has the plastic inlet manifold. Will any of these 3 options fit that engine? I´m using an aftermarket throttle body, and a stand alone ECU. I would also like to know if all of them are the same height, because a lower one will help me a lot with my hood clearance. Thank you!
Anything is possible but as far as we are aware it’s not a straight fit, so the answer is no not without engineering work, very sorry for the late reply, we’ve been busy on other projects and will try to keep on top of comments now!
I’ve just brought an engine turns out it’s a 172 engine will my inlet manifolds I’ve just had done by ms engineering now not work or can I blank the carbon canister pipe on the breather plate and use the inlet still ??
Hi Fred this has only just shown up, I’m assuming English isn’t your native language, so thanks for trying as I don’t speak any other languages, exhaust collector isn’t a term I’m familiar with so must have got confused in translation, if you mean manifold, then that answer is id believe it probably will bolt up, as for fitting in the engine bay I doubt it, and the fact the mk3 has flexible joints which are a poor design and fail often I wouldn’t recommend it.
Great video!! Straight forward and to the point. 👍 Got yourself a new subscriber. only bit of constructive criticism is, I think in future it'd be much better if you wore a lapel mic to help the audio quality. Thanks looking forward to more Clio content.
Hi, we welcome constructive criticism, so thanks for that, just in response though, we are working on very low budget equipment and editing software, this is none profit (actually a loss lol) so may take time to build up good equipment. I will look into it and see what we can do!
I’ve referred back to this video more than once for help. Very helpful thank you 👍
Hi! great video! I´m using a F4R that came from a sandero rs, which has the plastic inlet manifold. Will any of these 3 options fit that engine? I´m using an aftermarket throttle body, and a stand alone ECU. I would also like to know if all of them are the same height, because a lower one will help me a lot with my hood clearance. Thank you!
Nothing Rs on this engine just a stock f4r who deliver 140cv... Don't waste your money
Do you have any idea if its possible to mount the 1.6 16v inlet into the rs engine ?
Is it possible ?
Anything is possible but as far as we are aware it’s not a straight fit, so the answer is no not without engineering work, very sorry for the late reply, we’ve been busy on other projects and will try to keep on top of comments now!
If you was to delete the carbon canister, could a 182 upper inlet be fitted to 172 engine and just blank off the carbon cannister outlet ?
I’ve just brought an engine turns out it’s a 172 engine will my inlet manifolds I’ve just had done by ms engineering now not work or can I blank the carbon canister pipe on the breather plate and use the inlet still ??
what is the difference between the exhaust collectors 172 / 182
can i get an exhaust collector from a clio 3 on my clio 2 172?
Hi Fred this has only just shown up, I’m assuming English isn’t your native language, so thanks for trying as I don’t speak any other languages, exhaust collector isn’t a term I’m familiar with so must have got confused in translation, if you mean manifold, then that answer is id believe it probably will bolt up, as for fitting in the engine bay I doubt it, and the fact the mk3 has flexible joints which are a poor design and fail often I wouldn’t recommend it.
Great video!! Straight forward and to the point. 👍 Got yourself a new subscriber. only bit of constructive criticism is, I think in future it'd be much better if you wore a lapel mic to help the audio quality. Thanks looking forward to more Clio content.
HI DAD
Hi, we welcome constructive criticism, so thanks for that, just in response though, we are working on very low budget equipment and editing software, this is none profit (actually a loss lol) so may take time to build up good equipment. I will look into it and see what we can do!
What is the difference between rs182 with rs signals inlet and 172 inlet? They have the same pod dimentsion?