Sorry if I missed it, but do you remember what temperatures have you used for the printing? I'm also experimenting with the PP from Fiberlogy and so far yeah I'm struggeling a bit ;).
I do have so much respect printing PP, ABS, ASA or even carbonfiber enhanced filaments. How was your learning kurve with PP, how many bad prints did you need to get it dialed in well? Do you print PP at very slow speed or similar to PLA?
I print PP only on ocasions. It's expensive and not reall usefult to everything. The learning curve was not that bad. Once initial layer adhesion problem was solved and I put the printer into enclosure, no more bigger problems. But yes, it's rather slow
+1👍 💪 ahhh maybe this is worth my experimentation as well, TY! edit: or maybe i wont, :P -- maybe perfect for "toothpick" frames, but not goPro mounts. :shrug:
Hey man. Buy some pp sheet and clip it onto your print bed - sticks every time. This fiberlogy pp is the best I’ve used. Close second is centaur pp by formfortura. Good luck
I used PP to print my 5'' drone frame, works very nice.
Thanks for the nice information, Ill try these tips
Thankyou for your knowledge.
I have a propnut tool on my keychain, from PLA it last 3 Days, ABS survive 3 weeks, made out of PETG it will last years.
Sorry if I missed it, but do you remember what temperatures have you used for the printing? I'm also experimenting with the PP from Fiberlogy and so far yeah I'm struggeling a bit ;).
It was 235 nozzle and 95 bed.
That's really cool. Could you make video about nylon filament?
I do have so much respect printing PP, ABS, ASA or even carbonfiber enhanced filaments. How was your learning kurve with PP, how many bad prints did you need to get it dialed in well? Do you print PP at very slow speed or similar to PLA?
I print PP only on ocasions. It's expensive and not reall usefult to everything. The learning curve was not that bad. Once initial layer adhesion problem was solved and I put the printer into enclosure, no more bigger problems. But yes, it's rather slow
Have you printed any wing parts? wondering if it significantly improves impact resistance compared to PLA
Yes, greatly. But it's alos more flexible so flex might be an issue
@@PSAfterHours You should try using Gyroid infill. It gives nice support in all directions, and its most suitable for 3D printing.
Use a polypropylene bed. The brand I use is Mamorubot.
PP is very durable and versatile - Tupperware is also made of PP! 😉
Quite a lot of things are made from PP. The problem is that it's quite expensive
PP is NOT expensive. It weighs far less than PLA(1.25g/cm3 vs 0.92g/cm3). 1 kilogram of PP has at least 30% more filament than 1 kilogram of PLA.
+1👍 💪 ahhh maybe this is worth my experimentation as well, TY!
edit: or maybe i wont, :P -- maybe perfect for "toothpick" frames, but not goPro mounts. :shrug:
Video starts at 3 mins
I tried all and still not sticking bed , 95 degree , closed arround 3d printer , my printer Anycubic i3 mega S
Hey man. Buy some pp sheet and clip it onto your print bed - sticks every time. This fiberlogy pp is the best I’ve used. Close second is centaur pp by formfortura. Good luck
Thank you , pls show me which pp sheet @@JayBoogiePOV