@@MrDVCHITTer all the links have no adjustments. So if it’s off a lot and no parts are bent you could pulled the servo arms off and level there. Are buy adjustable links from servos to swash
Be nice to have a MANUAL for that Goosky S2 flight controller. How did you find out the setting was 11.5? And what's the brand of your pitch gauge please? And thanks.
Hey jack can you make a video for the t8 transmitter from rtf version to bind to different goosky models? For example...buying the s1 legend rtf and then the bnf version of the s2 legend and bind it to the s1 t8 Transmitter
I'm kinda late to be answering this, but all you have to do is plug in the helicopter, turn the t8 on and press the bind button 3 times. I have 4 helicopters bound to one. S2 you should probably remove the canopy to get better access to the bind button, but I did manage to find the button and press it with a small screwdriver without taking it off cause I'm lazy😅
Thanks for explaining the whole setup for us so great in detail!
Great help for all of us not very familiar!! Thank you sir!
Nice job JJ.
Thanks
How do you adjust zero pitch at mid stick if it's off. I tried on the app but it doesn't do anything.
@@MrDVCHITTer all the links have no adjustments. So if it’s off a lot and no parts are bent you could pulled the servo arms off and level there. Are buy adjustable links from servos to swash
Where can I find the pitch gauge you have?
Whats your tip to tip distance with the right pitch setting on the S2?
Hi JJ. One question: in terms of idle switch and pose/manual switch, where should they be placed before doing those adjustments?
Be nice to have a MANUAL for that Goosky S2 flight controller. How did you find out the setting was 11.5? And what's the brand of your pitch gauge please? And thanks.
Oops, saw the model number of the gauge in the video.
Hey jack can you make a video for the t8 transmitter from rtf version to bind to different goosky models?
For example...buying the s1 legend rtf and then the bnf version of the s2 legend and bind it to the s1 t8 Transmitter
I'm kinda late to be answering this, but all you have to do is plug in the helicopter, turn the t8 on and press the bind button 3 times. I have 4 helicopters bound to one. S2 you should probably remove the canopy to get better access to the bind button, but I did manage to find the button and press it with a small screwdriver without taking it off cause I'm lazy😅
Good vid ;)
When u are adjusting full positive or negative is the heli in normal mode, stunt 1 or 2?
Stunt
@@JJInvertedProduction stunt 1 or 2 and does normal have the same settings too?
@@scottbaddley72 they are the same for pitch.
@@JJInvertedProduction thanks, do u know how to use the app to set it up too or just with the board and TX itself?
Tyty
Now out of date, do one on the App.
Please!