DCA Tokyo Marui NGRS Upgrade Tutorial
HTML-код
- Опубликовано: 19 июл 2024
- A complete look at how we install our Tier 3 + Mosfet package into a Tokyo Marui NGRS TM416 rifle. This video also provides details on how to install DCA bolt release catch and triggers.
You have just upgraded my TM416D, played with it last week and very very happy with it.
Great to hear Sir. Thank you.
Superb tutorial and just what I needed before embarking on my own HK416 Delta Custom modification journey. Thank you!
Very good tutorial, worked perfectly on my Sopmod M4. I especially like that with all the newly installed components you also showed the most complex aspects of the reassambly process - something most channels dont while thats usually the more problematic part. Only recommendation for improvement: work on your camera setup, especially for showing smaller parts ;)
Thanks for the low battery warning off tip. My TM Mk18 Titan has started beeping at me even with a fully charged battery that we’ve voltage checked.
Always a please, glad this video is helping folks out as we intended. We will do more when COVID-19 is over and done with.
Thank God for quick change springs. I have a stock Mk18 which needs a M100 spring. What a nghhmare
Did you ever upgrade to the m100? If so did it damage the gun at all?
I just order the Magpul Style CTR Stock With battery modded pad I’m in Canada probably gonna be a long time before I got it but thx I search this kind of stock for so long and I finally find your’s hope it’s as awesome as people say you are
Thank you for shopping with us. UPS will take less than a week to get it to you.
Very nice video! Thanks!!
Much appreciated thanks
Great job. How you solve the problem of timing between recoil piston and piston on full auto? In some of my builds i had this problem where the piston and the recoil meet in wrong timing and cause the piston to brake.
Honestly, what a nice video! Keep it up. But one question: I´ve seen a lot of upgrades an many people don´t change the hop-up system, isn´t worth the change?
Thanks Sir. We believe the flat hop is a great skirmish hop setup but we are aware that TM hop is also good.
TM hop is only suitable up to 0.28g max our hop setup works best with 0.32g bbs and overhops 0.25g.
The thaught of doing that to a such a expencive gun out the box lol. But needs must not a fan of the tm battry set up.
Great vid thank you 👍
This kind of craftsmanship,,,
they realy don't have this in the Netherlands.
Much apprecaited Sir.
thanks for the video! what size philips head for the screws that obscure the wires on the rear tube?
Hi Dave, I spoke to you earlier today regarding my purchase of this stage 3 mosfet build. I just found this video and have a question regarding the fps testing of this rifle... Am I right in believing that the bb’s I will need to use are 3.0 or 3.2 grams? Also why is the fps in this video way lower than 340? Cheers mate, great video! 👍🏻
Our hop set at 0 applies flat spin to BBs of that weight. This accounts for the fps and the requirement to use heavier BBs. The advantage of this setup is it shoots flat hop set at 0 so every hop increment after that will hop up, meaning mo wasted positions on your hop unit. It is fiddly, time consuming and difficult, but, results are top.
So how about seeing 350 FPS equivalent using .30 or .36 ..... eg 0.36@260 etc.......
Ashley Blakebrough I chronographed my gun last night with the chrono on my acetech lighter bt which isn’t very accurate and I was hitting 290’s on .3’s.... only just a little over what it should be but will fall within regulations when tested on a proper chrono and by adjusting the hop correctly... the gun was consistent on .2’s and was reading around 348
I have a quick question, why did you swap the motor around the other way? (As in red dot facing stock and black dot facing barrel) I am installing a gate titan but not doing a motor upgrade, so would I swap the motor around too? Or do I leave it as it is (as in red dot facing barrel and black dot facing back)
Sweeeeet
What size brass bar is in the nub? Maybe I missed it but would like to get hold of some? Thanks.
Hi, I'm thinking in buying some upgrades for my HK416 Devgru of Marui.
I wanna buy a piston, piston head, spring guide and spring (M95)
In this configuration, do you thing I need to buy a reinforced gear set and bushings as well ?
Thanks!
Hi,
I own a hk416, TM, and I thinking in buying some internals to improve the range:
1. Spring m95, 2. Piston, 3. Head Piston, 3. Spring Guide, 4. Cilinder, 5. Titan Gate.
Would you recommend something more? Thanks for help!
If you running the gun around 300ish fps, you don't need to change much honestly.
I want to ask can it really put the prometheus ms series spring in without any cutting？ because i have try with the guarder Sp110 spring and it stuck
How necessary is it to put super glue on the hop arm? I want to flat hop my mk18 but don’t really want to mess with that hop arm.
Hi dave can you carry out this on the bolt brss series of guns thanks
We can carry out similar on a bolt sir yes. Please get in touch.
Should a stock TM416 just have the battery wired to Deans and then otherwise be left vanilla until the parts start breaking down, or is it best to start upgrading it all in one go right out of the box? I keep hearing conflicting opinions from people over stock Maruis being more than decent.
Your gun your choice Sir.
Really interesting video, and really nicely done, right up until you had to use a crap Velcro strap to hold on the but stock.
Bet the gun performs like a complete beast. :)
Get a genuine stock they fit much better. No velcro on mine.
Considering getting a mk18 with tier3+mosfet but what kind of range would this give me thanks
65M +
Wish i had started with this platform and not the e&c for the upgrade we did
What gear ratio are you using?
6mm bushings ? are they at least nicer than the stock plastic ones
They are indeed, although, I have never seen a broken plastic one.
You have a website I can check out?
Of course davescustomairsoft.co.uk
As a new airsofter, I struggle to understand why anyone would spend £600 on a rifle and a further £400 on upgrades. Please can anyone explain what benefits the upgrade provides other than maybe a bit more accuracy? If the weapon is so downgraded as a stock buy, why would anyone buy it? Just asking.
When you shoot them you will know.
Not many aegs have a functioning bolt catch, moving chamber and recoil and the ones that do tend to be a lot more expensive than this one
what is the price for the mod?
Full details listed against each rifle on our website sir.
@@davescustomairsoftltd7142 hi tank you my good sir
Come cat w
Нгрс
Гений
What gear ratio are you using?