Chip Detector is for metal bits in the engine or transmission oil. ( I was an engine man on Huey/Cobra/Loach in Vietnam). I would like to see your RPM indications. There should be a switch on the collective that is rigged to control RPM between 6000 and 6600 engine output/transmission input. We called it the beep switch. Rotor max RPM is 345. Maybe that is not modeled in the sim. You need to check the battery voltage before starting, 24 volts minimum. Torque is a limiting factor and hot ambient air temperatures degrade performance.
The only thing it lacks compared to DCS is how the front panel vibrates when the torque is very high or very low, which DCS does very well.... but this is my favorite module now in MSFS and my favorite module in DCS , I love the HUEY.
Nice review. I'm gonna have to grab this! FYI - you have a bit of a copy/paste issue, as the description and therefore the chapters are for another video. Also FYI - Taog had at least one other payware heli, and that's the SA316B - Alouette III.
New MSFS simmer here but former Army UH-1H pilot in Vietnam. Does this software require any additional software or interface to run in MSFS 2020? Loved the video and that sound of the Huey brings back so many memories. I was almost bouncing in my seat to the sound, I closed my eyes and it took me into the “way-back machine” Loved it!
At start-up, the soft "ticking" sound of the igniters to spark the fuel when introduced, used in connection with the wind-up of the starter motor. Initially we should hear the hi-pitched whine of the starter, as well as the ignitors "ticking". Jus say-n.
Taog's hangar has 2 other helicopters for sale too. The Alouette III which I own is very good too. And taogs hangar has a sa315b lama. Have not bought the lama yet but plan too.
I deleted DCS after flying this thing and that one back to back. They flew so similar, and with all of the mods I have for MSFS at this point, and my appetite for combat being so low these days, it made perfect since. I've been flying all over Washington, Idaho, and Montana and having an absolute blast.
As already mention Chip Detection is for metal pieces in the engine or transmission oil. It has separate detection for the main and tail rotor. It means that you damaged you engine or transmission by overstressing it. It's a feature in many aircraft with turbine engines (the Pilatus Porter for example) and has nothing to do with icing. 😉
Im loving it in MSFS... been thinking in getting it in DCS for the mission and weapons capability... anyone here knows if it does handle similar on DCS?
Not sure but i think the crew chief position is wrong, that is more of a black hawk position, should be at the back of the aircraft usually where one of the door gunners sit, still cool though it is on my must have list
i can see the weapon mounts but where are the weapons? Yeah id love to have a collective but i think they are way too expensive. Theres no budget or middle option available. You gotta go straight for the expensive ones. How hard is to make cheap one? I have never seen one from logitech or saitek and other budget to middle ground hotas and joystick makers...getting a virpil one or one of the other high end brands is too much for me plus is will have to figure out how to attach it ... well, somewhere. Heli simming would be more popular if there where cheaper options available.
dude your videos are bad assed full stop!!! funny story, this gorgeous aircraft just became avail. on marketplace (yes im one of those lowly xboxer's) and just friggin yesterday i said if anyone except Cap. Sim comes out with a uh-1, im buying it. ive just recently started buying/flying helo's in the sim and wow has it been a learning process. anyway, i bought it with just 3 reviews of a 5.0 which i never do but i said screw it... so thankfully i found a great review from you to ease my mind and i cant wait to get some time to really get in this thing and fly it. So thankful your vid's end up on youtube... wish i could do the patreon thing.
Just got the bird today and I am still figuring out why the Master Caution light came on. Any idea? Well just keep pressing the reset switch for a couple of seconds. Volia! Mind you I've flown this bird in DCS for ages and the handle on both FMs are very similar on casual takeoff/landings but in DCS I do a lot of combat harsh maneuvers (overspeed & overtorque 😮) so it's hard to compare the two in this exact situation.
gonna have to give this one some thought.. know I will be upgrading/changing to msfs2024 when it hits.. so might save my pennies for aircraft there instead
Great job love this Heli picked it up the min it released . Just love the sound we have a rescue one here in Melb & love hearing the sound of it coming & flying over the house . Plus thanks for that VRS tip I knew I was doing something stupid when I would get a flat spin outta nowhere .
I picked the Heuy up on release and i have not regretted it. It's such good fun to fly. I also use beam head & eye Tracker and really do prefer using it, even over using my quest 2 vr headset and its own inbuilt track ir??
With regards to the flight model, is there any actual ground effect modeled, like in DCS? Does it realistically weathervane in forward flight, or does it unrealistically force you to use constant application of the torque pedals?
I've been flying in high winds, it's a real handful until you get moment up. Hovering with a high tale wind will challenge the best of pilots, but turn it in to the wind and it's superb. So yes weathervane in forward flight and hover😊👍
I've jumped, rappelled and fast roped from Hueys. I love that bird and will definitely get it. The one I had for FSX was great but this one seems beyond belief. FTR, VRS = VORTEX Ring State, basically you're drilling a hole in the air.
Can anyone help out please? I can't get this to show up in MSFS. I've purchased & downloaded it ...but I do not know where to put it within my MSFS files? This is my first "third-party" purchase for MSFS. I agree with you on the Virpil collective & throttle ...it & a Buttkicker have changed my simming experience ...lol.
I too have trouble sometimes with 3rd party software, that’s why I’m waiting for it to come to the market place. Make sure it’s in your community folder and unzipped.
Chip Detector is for metal bits in the engine or transmission oil. ( I was an engine man on Huey/Cobra/Loach in Vietnam).
I would like to see your RPM indications. There should be a switch on the collective that is rigged to control RPM between 6000 and 6600 engine output/transmission input. We called it the beep switch. Rotor max RPM is 345. Maybe that is not modeled in the sim. You need to check the battery voltage before starting, 24 volts minimum. Torque is a limiting factor and hot ambient air temperatures degrade performance.
No "Fortunate Son" blasting? "Ride of the Valkyries"? C'mon man... :)
The only thing it lacks compared to DCS is how the front panel vibrates when the torque is very high or very low, which DCS does very well.... but this is my favorite module now in MSFS and my favorite module in DCS , I love the HUEY.
Love that video. I was a door gunner on a Huey in 1969. I will definitely buy this.
Where, what outfit? B Troop, 7th Squadron, 1st Air Cav, Vinh Long, 68-69.
@@i.r.wayright1457 A Company 158th Assault Helicopter Bn. 101 Airborne Camp The Ghost Riders Camp Evans 2/69 to July 69.
The NVG Light selector is used when wearing Night Vision Goggles, has nothing to do with flying in a formation.
My mistake. I thought it was for identifying position. Thanks for the information!
Nice review. I'm gonna have to grab this! FYI - you have a bit of a copy/paste issue, as the description and therefore the chapters are for another video. Also FYI - Taog had at least one other payware heli, and that's the SA316B - Alouette III.
New MSFS simmer here but former Army UH-1H pilot in Vietnam. Does this software require any additional software or interface to run in MSFS 2020? Loved the video and that sound of the Huey brings back so many memories. I was almost bouncing in my seat to the sound, I closed my eyes and it took me into the “way-back machine” Loved it!
At start-up, the soft "ticking" sound of the igniters to spark the fuel when introduced, used in connection with the wind-up of the starter motor. Initially we should hear the hi-pitched whine of the starter, as well as the ignitors "ticking". Jus say-n.
Taog's hangar has 2 other helicopters for sale too. The Alouette III which I own is very good too. And taogs hangar has a sa315b lama. Have not bought the lama yet but plan too.
The Lama is a must have, as well as this one. I can honestly say I would buy anything from Taog's hanger in a heart beat... Fantastic heli's 👍
I deleted DCS after flying this thing and that one back to back. They flew so similar, and with all of the mods I have for MSFS at this point, and my appetite for combat being so low these days, it made perfect since. I've been flying all over Washington, Idaho, and Montana and having an absolute blast.
This was what I was looking for. A DCS comparison. Sounds like it's a solid FM
IFF is used with the transponder, IDENTIFIER FRIEND OR FOE and sends a special encoded signal to radar to identify you are a Friendly force.
As already mention Chip Detection is for metal pieces in the engine or transmission oil. It has separate detection for the main and tail rotor. It means that you damaged you engine or transmission by overstressing it. It's a feature in many aircraft with turbine engines (the Pilatus Porter for example) and has nothing to do with icing. 😉
I bought this today. The sounds are great, especially when loading it up!
Carradine film POW guy flips switches in an instant
Im loving it in MSFS... been thinking in getting it in DCS for the mission and weapons capability... anyone here knows if it does handle similar on DCS?
Not sure but i think the crew chief position is wrong, that is more of a black hawk position, should be at the back of the aircraft usually where one of the door gunners sit, still cool though it is on my must have list
i can see the weapon mounts but where are the weapons? Yeah id love to have a collective but i think they are way too expensive. Theres no budget or middle option available. You gotta go straight for the expensive ones. How hard is to make cheap one? I have never seen one from logitech or saitek and other budget to middle ground hotas and joystick makers...getting a virpil one or one of the other high end brands is too much for me plus is will have to figure out how to attach it ... well, somewhere. Heli simming would be more popular if there where cheaper options available.
dude your videos are bad assed full stop!!! funny story, this gorgeous aircraft just became avail. on marketplace (yes im one of those lowly xboxer's) and just friggin yesterday i said if anyone except Cap. Sim comes out with a uh-1, im buying it. ive just recently started buying/flying helo's in the sim and wow has it been a learning process. anyway, i bought it with just 3 reviews of a 5.0 which i never do but i said screw it... so thankfully i found a great review from you to ease my mind and i cant wait to get some time to really get in this thing and fly it. So thankful your vid's end up on youtube... wish i could do the patreon thing.
Chip detectors are for warning that there are chips of metal in the transmission or tail rotor gearboxes and also the engine use a chip detector too.
This is how taog lets you know you have over torqued the engine
Just got the bird today and I am still figuring out why the Master Caution light came on. Any idea? Well just keep pressing the reset switch for a couple of seconds. Volia!
Mind you I've flown this bird in DCS for ages and the handle on both FMs are very similar on casual takeoff/landings but in DCS I do a lot of combat harsh maneuvers (overspeed & overtorque 😮) so it's hard to compare the two in this exact situation.
gonna have to give this one some thought.. know I will be upgrading/changing to msfs2024 when it hits.. so might save my pennies for aircraft there instead
I keep getting a chip detector warning whenever I start up even when following your directions
Nope. This is his third payware release and no it’s not a must have.
What’s the master caution that is displayed?
Great job love this Heli picked it up the min it released . Just love the sound we have a rescue one here in Melb & love hearing the sound of it coming & flying over the house . Plus thanks for that VRS tip I knew I was doing something stupid when I would get a flat spin outta nowhere .
No doubt an awesome helicopter but they forgot to make the air frame wobble as the rotors start rotating
It vibrates now int he latest update
I bought it but it dont shows ingame??
Hopefully it Comes to Xbox
It is I think …
I picked the Heuy up on release and i have not regretted it. It's such good fun to fly.
I also use beam head & eye Tracker and really do prefer using it, even over using my quest 2 vr headset and its own inbuilt track ir??
Good morning, hope you had a lovely weekend, turned the sound up for this one and it's beautiful. All good. Slainte, Mike 👍
I love the beam eye tracker and this huey. I bought the huey on day one release and wow.
Is it beginner friendly?
Been waiting for a review of this bird! Thank you!!
What airport is this?
With regards to the flight model, is there any actual ground effect modeled, like in DCS? Does it realistically weathervane in forward flight, or does it unrealistically force you to use constant application of the torque pedals?
I've been flying in high winds, it's a real handful until you get moment up. Hovering with a high tale wind will challenge the best of pilots, but turn it in to the wind and it's superb. So yes weathervane in forward flight and hover😊👍
Where did you get the exhaust diffuser and the gunner livery from?
It all comes with it
@@OverkillSimulations not with mine. 😂
@@hueyfoo enable it on config
I believe that's his second payware , first one was the LAMA.
Third. The first was the Alouette III, the Lama was the second one.
Those sounds!!! Love this video! Thank you!
flew in one of those so many times in the army
I've jumped, rappelled and fast roped from Hueys. I love that bird and will definitely get it. The one I had for FSX was great but this one seems beyond belief.
FTR, VRS = VORTEX Ring State, basically you're drilling a hole in the air.
Can anyone help out please? I can't get this to show up in MSFS. I've purchased & downloaded it ...but I do not know where to put it within my MSFS files? This is my first "third-party" purchase for MSFS.
I agree with you on the Virpil collective & throttle ...it & a Buttkicker have changed my simming experience ...lol.
I too have trouble sometimes with 3rd party software, that’s why I’m waiting for it to come to the market place.
Make sure it’s in your community folder and unzipped.
@@tomas5577 Thanks my friend.
I had TWO community folders ...leftover from an update. It was simply in the wrong one.