Thanks for the video! A local car store wanted to charge me $240 for parts and labor! I was able to do it myself for $90 in about 15 minutes. I routed the headphone jack into the center console for my install. Thanks Again!!!
Thanks guys! Your walk through not only gave me the confidence to do this upgrade it also made the job a breeze. The wife can enjoy her phone music in the car. This video gives you ALL the tools you need. Again great job, keep it up!
Just did my 2005 Honda Accord Took 30 min . My plug was in the back of my hea; not on the bottom so, it takes a little patience to plug in the adapter. Ordered item from enfig with standard shipping and received it in 3 days. Sounds great. PS. Make sure you follow instructions after install and turn off vehicle and remove key for 10 sec...radio will not recognize port until you do that.(panicked for a min)
Sometimes you do have to cycle the key to get the unit to work. On XM equipped cars its in the same location but faces towards the rear. It is a little trickier but not that bad.
This saved my hr and a half commute! I hate my fm transmitter crap. Just installed and put everything back in 20min at most. Hella easy! For the price too, this the ish. Right on Enfig! Oh and if anyone finds this useful I installed it on a 2005 Honda Accord Ex Coupe. 👍👌👍
Great how to. Did this step by step and it worked flawlessly. Only real problem I had was taking out the xm radio wires, they were really stuck in there. Saved me $80 doing it myself.
Anyone thinking of ordering items and doing this themselves, shouldn't be a struggle! Quite easy actually. Works perfect and sounds great. Don't forget to order the RCA cable!!! Link is not included in their bio.
Thanks for posting this! I managed to retrieve a credit card that I had lost when it slid above the door of the lower pocket. I didn't even need a panel popper - my fingers were able to do most and a screw driver worked for some.
Bought the adaptare online and was able to pop my panels with a flathead screwdriver. Probably saved me about $100 doing it myself as opposed to the shop. Great video thanks for the help!
This video was a GREAT help when installing my iSimple adapter that I'd recently ordered from you. I definitely would've struggled had I not viewed this. Thank you!
after watching this video and reading reviews. I ordered this blitzsafe. I just finished installing it. It was easy to install and works great! sounds good. thanks
The blitzsafe is just an aux. This is an aux plus iPod adapter with charging and control from the radio. This also includes the RCA to headphone jack cable. The HON03-IPDCAUX will work with all 2003-2007 Accords and newer ones also.
This worked! Thanks a lot. I used knife and flat screw driver to pop those clicks up, and also drilled with hot knife in fire.Don't judge me,i just had to use the tool i had and it worked perfect.
i bought one after watching this video, and just installed it minutes ago. this guide was tons of help! 15 minute max install. there is an opening to run the audio wire through the left side of the center console near the driver side foot-well area. i'm sure lots of others would prefer this method and it saves a lot of time! you guys should definitely let people know about that. i also thought it was easier to tuck the box UNDER that metal bar under the storage box, then pull the cords through
This was an excellent video. It all came apart exactly as they showed. Good tips too on getting things apart without breaking anything. I'm always afraid to pull or pry too hard if I don't know for sure that is how it comes apart so having that knowledge beforehand was valuable. I didn't have a pry tool like the one in the video so I made one out of a plastic scraper. Thanks for such a great how-to video. That is what caused me to buy your product. Oh yeah, it arrived at my house in two days too
Thanks for the video guys, I just installed "USA Spec PA15-HON2" which I got. I pulled it all apart just like you guys said in the video and its all working smoothly. It was a bit of a hassle to make the hole in the compartment for me since I could not find the right drill bit =/
Using a 30 pin you get line level out. If you use the headphone jack you just have to adjust the volume to match. And using aux volume can be controled on both iPad and car.
YungRy123... This is a fricking BREEZE! It was so easy especially after watching this video. I must say though you there are no if ands or buts about it... you need the pry/clip tools
RCA cable is not included because there is no reason to raise the price since most people already have that cable. The Enfig HON03-IPDC-AUX will do iPod and aux and also control from the radio.
The dealership can give you a hard time if something happens to the radio but all you have to do at that point is take out the harness before you take the car in. In the 10 years I have been selling interfaces I have never had a dealership void a warranty.
@sparklkinz The navigation radio has the plug on the back but it can't be reached from the bottom. We have a new video on the way that shows how to take it out.
This is an AUX adapter. Since it does not charge it doesn't matter. We do sell iPod adapters that charge and control the iPad. Contact us for more details.
The labor is Currently $50 and the part is currently $69.99. The RCA cable is currently $2.99 We are in Carlstadt NJ and we do not do mobile installations.
Sounds like you got the R version made for the Honda Odyssey. That wire is a needed modification for the Odyssey with video for the back seat passengers. While it will work it has the unnecessary wire and costs more money.
There have never been any audio Issues with this unit. There was a recognition isuue a few years back but that has been fixed for a while and all of our stock at enfigcarstereo is new.
I would put them at about the same quality we sell BlitzSafe because they are priced less.. The new unit has the option to add Bluetooth and iPod with control if you want to add it down the road so we pay more for it. We like BlitzSafe but they have not shipped us a Honda interface in about a month. And they haven't had iPod cables for any of their interfaces in longer than that. I'm not sure whats going on there but we can run our business with supply issues like that.
Just bought a Honda Accord Ex 2007 as my everyday car for work. If I buy this will I be able to control it from the steering wheel or do I lose that functionality
This will work with every 2003-2007 accord in the united states. It will also work with accords in other countries as long as they have the same shape radio. It doesn't matter if it has the single CD radio or the in dash 6 Disc radio or the Navigation radio.
Thanks for the video! A local car store wanted to charge me $240 for parts and labor! I was able to do it myself for $90 in about 15 minutes. I routed the headphone jack into the center console for my install. Thanks Again!!!
Bought this for my 2007 accord and took me less than an hour to install and works great!
Just got mine in the mail today plan on installing this Sunday
ordered it for my honda accord 2005 and just installed it today holy shit it works perfect
+Grant Williams Thanks.
Which parts did you order for this?
Thanks guys! Your walk through not only gave me the confidence to do this upgrade it also made the job a breeze. The wife can enjoy her phone music in the car. This video gives you ALL the tools you need. Again great job, keep it up!
Just did my 2005 Honda Accord
Took 30 min . My plug was in the back of my hea; not on the bottom so, it takes a little patience to plug in the adapter. Ordered item from enfig with standard shipping and received it in 3 days. Sounds great.
PS. Make sure you follow instructions after install and turn off vehicle and remove key for 10 sec...radio will not recognize port until you do that.(panicked for a min)
Sometimes you do have to cycle the key to get the unit to work. On XM equipped cars its in the same location but faces towards the rear. It is a little trickier but not that bad.
This saved my hr and a half commute! I hate my fm transmitter crap. Just installed and put everything back in 20min at most. Hella easy!
For the price too, this the ish. Right on Enfig!
Oh and if anyone finds this useful
I installed it on a 2005 Honda Accord Ex Coupe. 👍👌👍
Great how to. Did this step by step and it worked flawlessly. Only real problem I had was taking out the xm radio wires, they were really stuck in there. Saved me $80 doing it myself.
Instructions were easy to follow, and it's pretty simple to do too. I now have an excellent rectangle sending music to my car stereo.
Anyone thinking of ordering items and doing this themselves, shouldn't be a struggle! Quite easy actually. Works perfect and sounds great. Don't forget to order the RCA cable!!! Link is not included in their bio.
LOVE how descriptive and informative this video is. I appreciate all the tips you guys gave in this tutorial.
Thanks for posting this! I managed to retrieve a credit card that I had lost when it slid above the door of the lower pocket. I didn't even need a panel popper - my fingers were able to do most and a screw driver worked for some.
Thx for the video. I had a really hard time removing the last big pocket till I saw your video
I did too until I learned the trick.
ordered it took a half hour to install works great!
Great to hear!
Bought the adaptare online and was able to pop my panels with a flathead screwdriver. Probably saved me about $100 doing it myself as opposed to the shop. Great video thanks for the help!
If you are reading this please buy a panel tool and do not risk scratching your car. Even if you do not buy it from us.
after seeing this video i ordered the HON/M LINK 1 V.2X interface and it was a breeze to install thanks to your video!! thanks so much.
This video was a GREAT help when installing my iSimple adapter that I'd recently ordered from you. I definitely would've struggled had I not viewed this. Thank you!
Just installed today in my 05' Accord (no navi/xm) Works perfect - just like it should.
thank you, I'm pretty much automobile illiterate - you have no idea how much this helps
after watching this video and reading reviews. I ordered this blitzsafe. I just finished installing it. It was easy to install and works great! sounds good.
thanks
Incredibly easy!! The video is great.... Installed my adapter yesterday... took about an hour. Wish I had done this two years ago :P ...
Cheers guys you are a life saver who uses CDs lol
The blitzsafe is just an aux. This is an aux plus iPod adapter with charging and control from the radio. This also includes the RCA to headphone jack cable. The HON03-IPDCAUX will work with all 2003-2007 Accords and newer ones also.
This worked! Thanks a lot. I used knife and flat screw driver to pop those clicks up, and also drilled with hot knife in fire.Don't judge me,i just had to use the tool i had and it worked perfect.
Thanx guys this vid really helped me out a bunch and only took me about an hour. I appreciate it.
This is a great demonstration! Also, is that Bruce Willis at the end talking? Lol
i bought one after watching this video, and just installed it minutes ago. this guide was tons of help! 15 minute max install. there is an opening to run the audio wire through the left side of the center console near the driver side foot-well area. i'm sure lots of others would prefer this method and it saves a lot of time! you guys should definitely let people know about that. i also thought it was easier to tuck the box UNDER that metal bar under the storage box, then pull the cords through
appreciate the video, made installation of this thing a piece of cake, and only took a few mintes...
The adapter, installation tool and video worked great on our 2007 Accord. Thanks!
This was an excellent video. It all came apart exactly as they showed. Good tips too on getting things apart without breaking anything. I'm always afraid to pull or pry too hard if I don't know for sure that is how it comes apart so having that knowledge beforehand was valuable. I didn't have a pry tool like the one in the video so I made one out of a plastic scraper. Thanks for such a great how-to video. That is what caused me to buy your product. Oh yeah, it arrived at my house in two days too
Thanks for the video guys, I just installed "USA Spec PA15-HON2" which I got. I pulled it all apart just like you guys said in the video and its all working smoothly. It was a bit of a hassle to make the hole in the compartment for me since I could not find the right drill bit =/
I bought it and had it installed. It's working perfect!
I installed this today on my 03 Accord EX V6 Coupe. So far its amazing! thanks Enfig!!
@kural90 Yes it does not disturb the factory controls but this unit offers no control of your device.
@challobeta If you unplug the radio you will need a code. This install does not require you to disconnect the radio.
Just installed this. It works great and sounds good. Easy to install too
Using a 30 pin you get line level out. If you use the headphone jack you just have to adjust the volume to match. And using aux volume can be controled on both iPad and car.
@sarsshadow Correct This device uses a port designed for a trunk mounted CD changer and tricks the car into opening the audio lines of that port.
Finally a good tutorial. Thank you sir
Thanks!
@oldazjam87 This item does not control songs from the radio. Its just an aux.
Get the Enfig HON03-IPDC-AUX. It does iPod and aux as well as control it from the radio.
Yes the cable is facing toward the read but the instal is identical.
YungRy123... This is a fricking BREEZE! It was so easy especially after watching this video. I must say though you there are no if ands or buts about it... you need the pry/clip tools
Great, clear vid with well spoken instructions. Thanx
Great video. Helped me in saving $60 for installation. But voice is low when we use it for phone calling.
+venu9955 Sounds like a phone setting.
You can usually buy it from us and have it installed at any local shop.
it was really helpful thanks
If you put the adapter under the cubby over the metal box it closes perfectly.
@lanteew The Part is the BlitzSafe HON/AUX DMX V.2X and the cable is the Enfig 35RCA-6. Both can be purchase at the link i nthe description.
@rustamkaitov I dont see why not. I still have not seen this radio.As long as it has controls for an external CD changer it will work.
Its a different adapter. This is just an AUX.Look at the description for our blog page that shows all of your options.
Yes it will.
Just make sure you have an "AUX" button on your radio and you will be good to go
@titanz05 No problems. I usually put it to the back right.
RCA cable is not included because there is no reason to raise the price since most people already have that cable. The Enfig HON03-IPDC-AUX will do iPod and aux and also control from the radio.
For an aux you do not need an adapter. But for an iPod cable apple sells an adapter.
The dealership can give you a hard time if something happens to the radio but all you have to do at that point is take out the harness before you take the car in. In the 10 years I have been selling interfaces I have never had a dealership void a warranty.
Great tutorial. Saved me a lot of searching. Thank you!
Clear, well done, informational video. High-five, great success!
Thank you for this video. It helped me replace a broken adapter!
@Nightstrife911 You can avoid drilling a hole by running the cable down by under the glove box.
@MikeE856 It is the same item. But for the navigation radio the radio must be removed. We have another video coming soon that shows how to do this.
@wilfre0305 Yes this adapter is a T harness that allows you to keep XM and/or navigation if your car is equipped.
@sparklkinz The navigation radio has the plug on the back but it can't be reached from the bottom. We have a new video on the way that shows how to take it out.
I like your carbon fiber panels!
It's the safest way to do it but as long as you don't splice a wire by mistake it's not necessary.
This is an AUX adapter. Since it does not charge it doesn't matter. We do sell iPod adapters that charge and control the iPad. Contact us for more details.
The labor is Currently $50 and the part is currently $69.99. The RCA cable is currently $2.99 We are in Carlstadt NJ and we do not do mobile installations.
@pasckymix yes it works with ALL 2003-2007 Accords And 2008+ also
Sounds like you got the R version made for the Honda Odyssey. That wire is a needed modification for the Odyssey with video for the back seat passengers. While it will work it has the unnecessary wire and costs more money.
@BuhRanDuhn I'm pretty sure you can just route it over without drilling a hole. I'll check on the next car and report back.
If you want a unit that charges the Enfig HON03-IPDC-AUX charges and controls your iPod from the radio.
There have never been any audio Issues with this unit. There was a recognition isuue a few years back but that has been fixed for a while and all of our stock at enfigcarstereo is new.
It works with all 2003-2007 accords. There is a rare CD changer that replaced the pocket under the radio. That is the only time its not compatible.
I would put them at about the same quality we sell BlitzSafe because they are priced less.. The new unit has the option to add Bluetooth and iPod with control if you want to add it down the road so we pay more for it. We like BlitzSafe but they have not shipped us a Honda interface in about a month. And they haven't had iPod cables for any of their interfaces in longer than that. I'm not sure whats going on there but we can run our business with supply issues like that.
Just bought a Honda Accord Ex 2007 as my everyday car for work. If I buy this will I be able to control it from the steering wheel or do I lose that functionality
No not with this device but we do have on on the website that does.
This video was awesome. Thanks for saving me a ton of money!!!!!!
There are 2 BlitzSafe. One for iPod and one for aux. See the link in the description for all the available adapters.
It is behind the radio on navigation radios.
Thank you! Worked perfectly.
Great video thanks so much!!!! Took 20 minutes
Thanks and your welcome.
The tools are enfig PPT-12345. And yes we ship worldwide.
Thanks. And thanks for purchasing it from us.
@Chrishan2Chauhan Because pricing may change you can check the pricing on the web site by clicking on the link in the description.
This will work with every 2003-2007 accord in the united states. It will also work with accords in other countries as long as they have the same shape radio. It doesn't matter if it has the single CD radio or the in dash 6 Disc radio or the Navigation radio.
Yes as long as it has the same style radio. I have never seen one not work.
It works right away.
Depends on the shop.
We used a unibit but you can also use a dremel.
Thanks guys! This was very helpful!
Yes it works with any phone.
It depends on the shop.
@mrlaocean Sorry I had no Idea there were all these comments waiting. The E-mails got to a g-mail account we don't use. Thanks
That's either XM or Navigation. That is what the splitter is for.
That is just a splitter. You still need an interface like the one in the video to activate the audio port.
Excellent video.
@mrlaocean Sorry I had no Idea there were all these comments waiting. The E-mails got to a g-mail account we don't use.
It will not go into aux mode unless there is an adapter connected to the back of the radio.
Much appreciated, thanks so much.
If you follow the link in the description it shows all of our adapters including ones that control from the radio.
@oooDrDooo Yes they are available in the link under comments.
@elunicocri It's at the link under the description