Full Barrel Fitting Part 2 - upper lugs, muzzle and DOH!
HTML-код
- Опубликовано: 5 фев 2025
- We finish fitting this replacement bull barrel and I eat a slice of humble pie!
Upper lug fitting, looking for binding points at the muzzle and how to correct plus barrel links galore!
Stay tuned for the chambering of this barrel, quite quick. and then back to the 9mm Commander build.
Reload and Let Freedom Ring!
Great video
I can't believe you showed us, how you attempted to Beat this into submission. JB
You should try the Dawson toolless guide rod for bull barrels
Thank you for sharing im beginning on doing research on building my own 1911 and your videos are very informative. Question (this very well could be my ignorance)at 35:30 ish you explain to test with no link to verify the feet are cut correctly. If i understand from earlier the cutter was a .195" and the slide stop pin was .200" shouldn't their be .005" of bind?
It's a well kept secret, Maybe he will share when he learns.
How could I order one of your barrel bushing fixture?
well I guess it works if you are not buying the cutter jig, but this seems a little much with a bit prone to inaccurate barrel fitting get a barrel lug cutter at Brownells might be expensive but for best fit, its the only way to go
That's literally what he did in part 1 of the video 😅
ohw yeah alright, did not catch that @@swartzkoft7886
@@swartzkoft7886no it is not, you know not of what you talk about, he cut the lugs with a rotary lug cutter, not using a jig in the mill, this guy is an amateur.
@@swartzkoft7886and he doesn’t know how to fit a link.