Great Video, Made me an Jacuzzi Pro! Removed Repaired and installed my 10 year old control, Ordered a new one and I will be ready when it gets here. Thank You!
Great video! Our 17-year old Jacuzzi hasn't turned on in years and they didn't put in an access panel underneath, just tiled over it. There is an access panel on the side of the house to get to the motor but I can't reach in far enough to get to this control panel in order to work on it....I'll try this to remove it and buy a newer version to, hopefully, get it up and running again!
Thanks for the video. In the video you mention a pdf that explains how to retrofit the old valve body to the new valve body assembly. I searched but could not find it. Is it still available? I suspect I'm going to have issues removing the air control knobs 20 years after the tub was installed. Again, thanks for the great video.
Almost seven years later and still a super helpful video. I will be ordering parts from your website shortly for this repair. My issue is when I press the power button ON, it will stay ON if I hold it down, but as soon as I let the button go, the unit shuts right off. I'll replace the switch at the motor and the bellows. Hopefully does the trick. Thanks!
That's what I'll have to do also. Sometimes it gets stuck in the other position and continues to run until I turn off the circuit breaker. Right now I have to hold it down in order to keep it running. I assume the bellows are good or it wouldn't start at all. It seems to be just a switch that's going bad. Thanks so much for all the info.
I’ve removed buttons and faceplate…You mention a pdf with instruction to replace old with new, I can’t locate it. In removing one of the buttons I broke the stem and housing of old one is damage and needs to be changed.
Hello, I loved your video and I think the on off switch washer is the part I need. However, my Jacuzzi circulates the water and I have never seen air injected anywhere. I have 6 water jets. I bought mine 1998 model N6159959- now 7/18/21it is 2021. The washer on the on off switch somehow has disappeared and I will purchase the washer form you if it is still available.
Mine won't turn off , but I removed the bellows and it holds a vaccum ; in other words , when I squeeze the rubber and put mu finger over the hole , it stays collapsed and when when I press it , a strong puff of air comes out . Does this mean it's more likely my switch has failed ? I can't even see it or most of the motor in this tub. It seems to be buried in the back.
Question: When I push and hold the button down the tub will work. Does this suggest that only the button needs to be replaced or should I replace all three parts associated with the air switch button????
Guess you'd think a major outfit would build the metal parts that get wet constantly, would make them stainless huh. Thanks for the video though,, very helpful.
you would think that engineers would be smart enough to have a pressurized air feed from the pump to keep the On / off Line Pressurized. i had to modify the air line with a valve and back feed line to mine so it never lost prime again.
Hello AJ I'm wondering if you know of any common issue where water is leaking from the back side of these control panels when the tub is filled/over filled on full air and water is covering the bottom half of the buttons? I recently found this to be the case on my tub when the water was left running (forgotten) up to the overflow level for a couple hours. I have the buttons and cover off (one button snapped the shaft off and the other pulled the lock ring and shaft piece out of the valve in one corroded together piece. My assumption is that the air valves must be allowing water to pass the first o-ring and leak at the air intake openings? I'm sure the leak isn't from the overflow drain since I sealed off the control panel from the water and ran the the tub in overflow for hours and it stopped leaking onto the basement floor. What I see looks sealed to the tub well and no cracks or anything that would allow water to exit the tub.
Denise; you can't see air and that's what controls your tub on and off. Because of that we recommend changing these parts to guarantee it to be fixed: www.ipoolandspaparts.net/jacuzzi-bellows.html www.ipoolandspaparts.net/7396000-nmc004922000-zp1521u1-jacuzzi-air-switch.html Let me know if you need anything else; here to help. AJ
Thanks for the video, and most importantly thanks for the parts for my older jacuzzi tub, quick shipping, and quick help when I needed it.
Great Video, Made me an Jacuzzi Pro! Removed Repaired and installed my 10 year old control, Ordered a new one and I will be ready when it gets here. Thank You!
Great video! Our 17-year old Jacuzzi hasn't turned on in years and they didn't put in an access panel underneath, just tiled over it. There is an access panel on the side of the house to get to the motor but I can't reach in far enough to get to this control panel in order to work on it....I'll try this to remove it and buy a newer version to, hopefully, get it up and running again!
Thanks for the video. In the video you mention a pdf that explains how to retrofit the old valve body to the new valve body assembly. I searched but could not find it. Is it still available? I suspect I'm going to have issues removing the air control knobs 20 years after the tub was installed. Again, thanks for the great video.
Told me just what I needed. Thanks for the great video!
Hi do you have a video on replacing a Jacuzzi suction valve assembly on a bathtub? thanks
Almost seven years later and still a super helpful video. I will be ordering parts from your website shortly for this repair. My issue is when I press the power button ON, it will stay ON if I hold it down, but as soon as I let the button go, the unit shuts right off. I'll replace the switch at the motor and the bellows. Hopefully does the trick. Thanks!
Did it? I have the same issue.
@@michaelsmith6313 worked perfectly!
One more thing I did order both the push button and the air switch and it turned out to be just the switch but I replaced both anyway. Good luck
That's what I'll have to do also. Sometimes it gets stuck in the other position and continues to run until I turn off the circuit breaker. Right now I have to hold it down in order to keep it running. I assume the bellows are good or it wouldn't start at all. It seems to be just a switch that's going bad. Thanks so much for all the info.
I’ve removed buttons and faceplate…You mention a pdf with instruction to replace old with new, I can’t locate it. In removing one of the buttons I broke the stem and housing of old one is damage and needs to be changed.
I have a 3 button jacuzzi control and the on off button we'll turn the Jets on but they won't stay on unless you hold the button down what do I need
This is the exact part I need but I can't find it anywhere or on your site...can you help?
Hello, I loved your video and I think the on off switch washer is the part I need. However, my Jacuzzi circulates the water and I have never seen air injected anywhere. I have 6 water jets. I bought mine 1998 model N6159959- now 7/18/21it is 2021. The washer on the on off switch somehow has disappeared and I will purchase the washer form you if it is still available.
Were can I purchase the control panel on and off switch
I have been pulling, shaking, using a screw driver and I cannot get the air flow knobs off. Any ideas? They are frozen.
Mine won't turn off , but I removed the bellows and it holds a vaccum ; in other words , when I squeeze the rubber and put mu finger over the hole , it stays collapsed and when when I press it , a strong puff of air comes out .
Does this mean it's more likely my switch has failed ?
I can't even see it or most of the motor in this tub. It seems to be buried in the back.
Can I get a repairman to put in a new on/off button?
where is the jacuzzi engineered pdf file for the retro fit the new style valves
I have the same problem
Question: When I push and hold the button down the tub will work. Does this suggest that only the button needs to be replaced or should I replace all three parts associated with the air switch button????
We always suggest replacing all three parts: bellow, air tubing, and air switch. Let me know if you need anything else. Here to help anyway I can. AJ
iPoolandSpaParts.net
Can you link to the parts and any information on installation
Awesome 😊
Nice video....thank you.
Do you have a part number for the air button seen @ 3:00?
How to change push button on a lifer spring spa
Guess you'd think a major outfit would build the metal parts that get wet constantly, would make them stainless huh. Thanks for the video though,, very helpful.
you would think that engineers would be smart enough to have a pressurized air feed from the pump to keep the On / off Line Pressurized. i had to modify the air line with a valve and back feed line to mine so it never lost prime again.
Mine won’t turn off. I have to unplug the motor.
Mine turned on but now won't shut off. Any ideas?
Hello AJ I'm wondering if you know of any common issue where water is leaking from the back side of these control panels when the tub is filled/over filled on full air and water is covering the bottom half of the buttons? I recently found this to be the case on my tub when the water was left running (forgotten) up to the overflow level for a couple hours. I have the buttons and cover off (one button snapped the shaft off and the other pulled the lock ring and shaft piece out of the valve in one corroded together piece. My assumption is that the air valves must be allowing water to pass the first o-ring and leak at the air intake openings? I'm sure the leak isn't from the overflow drain since I sealed off the control panel from the water and ran the the tub in overflow for hours and it stopped leaking onto the basement floor. What I see looks sealed to the tub well and no cracks or anything that would allow water to exit the tub.
The air button on my Jacuzzi tub has to be pushed several times to get it to turn off. It feels like it is stuck. What do I need to replace to fix it?
Denise; you can't see air and that's what controls your tub on and off.
Because of that we recommend changing these parts to guarantee it to be fixed: www.ipoolandspaparts.net/jacuzzi-bellows.html
www.ipoolandspaparts.net/7396000-nmc004922000-zp1521u1-jacuzzi-air-switch.html
Let me know if you need anything else; here to help. AJ
iPoolandSpaParts.net
Num-k
Got it Thx
I'm trying to buy parts from your site but it says not secure and it's loading slowly.
Hey Bob, sorry to hear that. Please give us a call to the number on the contact page and we would be happy to help you get the parts you need!
Thank you. The order finally went through. I called and they said they were being attacked.
nice
How many times did he say “ ok ?”....52 times....