Did this job yesterday; the hardest part was aligning the window glass at the end. One major warning for anyone coming here before doing this job: do not simply close the door fully to see your work and check whether you need to tweak the position. Had I done that, it would've closed on the frame and possibly broken. Gently offer the door up but do not close it fully, you will be able to see whether it's out. Aim for an equal gap that's straight down the side, and about 1cm below the frame around the top.
Great video thanks, our mito drivers window has just packed up completely, so my question is....if the window is not working at all, how do we lower the window enough to get the window bolts out to start with. Btw, we've checked the fuses and electrical supply so we are sure it is the motor!?
You can't get a spanner up there as they are Torx internal. You can replace the Motor without removing the glass, just remove the 3 nuts holding it to the inner door skin. If the mechanism is shot, cut the cables and the window will drop.
Did this job yesterday; the hardest part was aligning the window glass at the end. One major warning for anyone coming here before doing this job: do not simply close the door fully to see your work and check whether you need to tweak the position. Had I done that, it would've closed on the frame and possibly broken. Gently offer the door up but do not close it fully, you will be able to see whether it's out. Aim for an equal gap that's straight down the side, and about 1cm below the frame around the top.
Just changed my daughters passenger side regulator this weekend, thanks for the assistance:)
Thanks Neil, just changed mine thanks to you and your video…saving hundreds ❤️
Just done mine, great guide- thanks!
Nice work with the moisture barrier.
Had to change my sons regulator, used this video, all done, jobs a good un 👍
Great video thanks, our mito drivers window has just packed up completely, so my question is....if the window is not working at all, how do we lower the window enough to get the window bolts out to start with. Btw, we've checked the fuses and electrical supply so we are sure it is the motor!?
You should be able to get a spanner up.there.
You can't get a spanner up there as they are Torx internal. You can replace the Motor without removing the glass, just remove the 3 nuts holding it to the inner door skin. If the mechanism is shot, cut the cables and the window will drop.
@@ItaliaAutos I am not able to get the spanner up, any suggestions how to lower when the motor won't work? Thanks
you can snip the wires to lower ruclips.net/video/ZZ2R697F46c/видео.html
Are alfa romeo brera and mito cam buttons the same? Do they fit together?
Looks simple, got charged £380 for changing it. Should have done it myself.
Wow. Its takes 90 min max to fit and set up. It'd the units that cost the £££
Brilliant video , helped me out a lot. Cheers
Cheers very useful video!
Is it possible just swap the motor somehow?
You can replace the Motor without removing the glass, just remove the 3 nuts holding it to the inner door skin
Hope mines just a fuse that’s gone 🙏
Very useful video!
ISUDAR Car Navigation thanks