This is the best vid I have found on the use of the really subtle pedal. I do like mine although I may have been expecting too much in terms of shaping vs. enhancement as you point out. Thanks for posting. The best way to get to know the pedal is to leave it on for a while, then turn it off the effect is more evident. Just switching on/off and turning knobs does not make the subtle differences obvious.
Awsome review, I have a small acoustic pedalboard and I’m having trouble in what order I should organize my chain. I have it this way: guitar>Tuner>IR Pedal>LR Baggs Reverb>LR Baggs Session DI (This is different as the one you are reviewing but is basically the same core)
No worries, if you're running into an amp, I'd place the reverb after the Session DI. However, if you're running straight to a mixing desk you'll probably want to keep the DI last in chain. Hope that helps!
Thanks..best review...had this pedal with the whole align series...sold that board to simplify the set up to a venue and align reverb...but just re ordered the session..man I miss that pedal...subtle but adds so much sparkle to my nylon string tone...
Great Video with consistent A/B examples! Love it. I got the NUX Optima Air based off your other video and it is great. Think I might pick up this pedal as well. The only thing I don't like about this pedal is.....the look. Thanks again!
you probably dont care at all but does anyone know of a way to log back into an instagram account? I was dumb lost my login password. I appreciate any help you can give me
@Muhammad Emmitt Thanks for your reply. I got to the site on google and Im in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
Thank you so much for the very informative video on session! Just bought the session and wondering what is the best way of chaining this in my rig. So do you reckon: Acoustic guitar -> Polytune 3 -> Venue (efx loop) -> session -> Chorus -> Blue sky -> Venue (efx loop) -> DI out Or Acoustic guitar -> Polytune 3 -> Session -> Venue (efx loop) -> Chorus -> Blue sky -> Venue (efx loop) -> DI out Thanks in advance!
I'd experiment with both options. The benefit of having the session first is that any additional EQ moves won't affect the comp or saturation. However, you may prefer the Session after the EQ as a type of "finishing" effect. So both would work. It's just really about what you like the sound of ; )
I love the Session pedal! It's pretty subtle though... If you're new to pedals, you might be better looking at more of an 'all-in-one' unit like the LR Baggs Venue DI... Hope that helps.
Hi. Wonderful video. Just a quick question. I have a set of new LR baggs pedals and Im wondering in what order I should set them up. Lr baggs venue di Lr baggs sesssion Lr baggs reverb
Thanks! Awesome, those pedals should sound great together ; ) If you're running into an acoustic amp... I'd probably go: the Venue, into the Session, into the Reverb. (Though, you might want to try swapping the Session and Venue around to see which you prefer). However, if you're mainly using the DI 'Output' of the Venue... I'd simply run both the Session and Reverb pedals in the 'Effects Loop' of the Venue. This will give you a more versatile setup and would probably be the option I'd recommend. Hope that helps!
I have a Sennheiser XSW pedal (doubles as a tuner), NUX Optima Air, LR Baggs Session, Strymon Blue Sky, Boss RC-1, and Orange Acoustic Amp. Which order would you recommend for the best signal chain? Occasionally it will go into an amp, but 8 times out of 10 it will run into a stage box which will go into the PA system. Thank you!
No worries. I suggest trying... Wireless System > Optima Air > (Session > Looper - both in the Optima Air FX loop) > Blue Sky. However, if you want to run the Optima Air as your main DI, you could also try the Blue Sky in the effects loop too. Additionally, you might prefer having your looper after the Blue Sky if you like being able to change the reverb sound on some layers. Hope that helps!
I would in general terms always aim for preamp>eq>compressor>reverb&delay. But you could switch reverb&delay to go before compression. And try to high pass filter at around 80-100hz before compressor aswell. And if you use dramatic tone shaper put it right after preamp.
I haven't tried it. But I think this pedal would work well on most acoustic sources... So, it would probably sound nice on violin. That said, it depends on the pickup though. If it's a little spot mic, running into compression might cause unwanted feedback. So it's really something you'd have to test out. Hope that helps.
Luke, I noticed that you have some plastic pedal switch covers on your pedals that increases the surface area for easier activation. Can you explain what they are and where to get them, please? They are just what I need. Thanks, Warren
Great video! I have a nylon string with a built-in piezo pickup that loses its natural tone a bit when plugged in. I would like to boost the volume in a live setting and maybe enhance the tone a little bit, would you recommend this pedal for that or would it be too subtle?
Yep, this would be a great pedal in that scenario. You could also check out their Align Series EQ (or even their VoicePrint DI pedal) for some other great options too. Hope that helps ; )
Hi, I'm curious. Does the Session pedal by LR Baggs, colour the sound when the pedal is turned off? Lets say that the Session pedal by LR Baggs, is not in the chain, can you tell the difference. From when its in the chain, but turned off.
Cheers! I've posted a full walkthrough video of the entire pedalboard here: ruclips.net/video/hDhEw2tq2C0/видео.html. The video outlines all of the stuff I've used as well as my main concept behind building the board. Hope that helps ; )
So on mine I can’t use the gain at all. Like I can’t even turn it past the first hash before it starts lighting up the clip indicator. I’ve even tried turning the pick up all the way down, and that allows me to SLIGHTLY bump the gain to like maybe the 3rd or 4th hash, then starting clipping again. I do play pretty hard but I don’t have any issues out of any of my other pedals. Playing a PRS Angelus SE A60E. HELPPPPPPP!
Sounds like you might need to get in touch with LR Baggs support. Just shoot a short clip of the issue on your phone for them. If the pedal is faulty they should be able to help you out. Hope that helps!
Hello, question re your optimal air nux, I have a travel guitar that has a horrible piezo pickup. Before changing it out I was wondering if the it on it can make it sound a little better. How can I get your it....and what pick do you have on your guitar
Hey, I have an AP5 pickup from Maton. Yeah, IR's might improve the sound of your guitar... However, they'll probably work a lot better with a pickup that already sounds relatively balanced. Preamp pedals work to enhance what's there. So it really depends how bad the pickup quality is to start with...
Yep! I really like these ones: ruclips.net/video/GaArs1d3oSk/видео.html The RockBoard Flat Patch cables Gold Series are also another great compact option. Hope that helps ; )
Thank you for the informative post. I am in the process of putting a small acoustic pedal board together. I currently have the LR Baggs Venue and TC Helicon Harmony Singer 2. I am considering purchasing the LR Baggs Align series Reverb and Session. Could you recommend the chain order of the 4 pedals on the board? Thanks in advance.
No worries! It's hard to say, without knowing exactly how you'll be using your setup. I'm not that familiar with the Singer pedal. However, usually I'd place any pitch effects first in chain. So I'd probably suggest: Singer 2 > Session > Reverb > Venue I'd also probably place the Session and the Reverb in the FX loop of the Venue. That way you have a clean signal hitting the tuner/front end of the Venue. Anyway, hope that helps!
Hi would this improve the tone when playing into a Bose s1 pro amp. I’m playing with a K&k pure mini and the sound is ok but I’m looking for that warm fuzzy electro acoustic tone that is forgiving when strumming without that clear pick out every brittle tone. ( if that makes sense). I am certainly hearing that tone I’m after but are you using some other magic. Cheers
Hey! I'm not sure exactly what you're after... But if you're looking for something to add some subtle compression and thickness, the Session pedal is a great shout. You could also check out their Session DI for a bit of extra functionality too. Hope that helps.
@@lukezecchin thanks, I am just a bedroom rockstar and I am new to plugging in. I would like to try pedals out with my Bose s1 pro amp but the local gear shops have limited choice and stock. The sound I was hearing from your review was nice a warm but your guitar also sounded good before you used the pedal. What other pedals do think might be worth checking out.thanks
@@dw1208 There are stacks of great sounding pedals for acoustic guitar. LR Baggs do awesome high-quality stuff. But, depending on your budget, there's plenty of other cool sounding, all-in-one multi-effects too. FYI: If you want to check out the full pedalboard I featured in this video, you can check it out here: ruclips.net/video/hDhEw2tq2C0/видео.html
@@lukezecchin Well I need some thing the boost up my volume because I play at a church and I have my volume all the way up on my guitar and in the back they have my volume all the way up but they can’t hear me so they told me that I need a preamp to boost up gain and volume
@@vannygorge Yes, this can certainly boost the volume of your guitar if needed. You could also check out the LR Baggs range of great DI's, they're probably closer to what you need. Otherwise, any simple 'clean boost' pedal will give you more signal from your guitar. Cheers.
I have this pedal, it 1) inverts the phase (NO WAY!) for no reason. 2) compression is not compression, it simply cut low-mids always 3) saturate is less than decent. I took it off the pedalboard. The "very subtle, very subtle" thing on all reviews mean something.
This is the most concise review of an LR Baggs pedals that I have viewed on RUclips. Thank you for your objective and clear point of view.
Awesome, thanks for the kind words. Glad you enjoyed the video!
This is the best vid I have found on the use of the really subtle pedal. I do like mine although I may have been expecting too much in terms of shaping vs. enhancement as you point out. Thanks for posting. The best way to get to know the pedal is to leave it on for a while, then turn it off the effect is more evident. Just switching on/off and turning knobs does not make the subtle differences obvious.
Thanks for your kind words. All the best, mate!
Awsome review, I have a small acoustic pedalboard and I’m having trouble in what order I should organize my chain. I have it this way: guitar>Tuner>IR Pedal>LR Baggs Reverb>LR Baggs Session DI (This is different as the one you are reviewing but is basically the same core)
No worries, if you're running into an amp, I'd place the reverb after the Session DI. However, if you're running straight to a mixing desk you'll probably want to keep the DI last in chain. Hope that helps!
This was really handy pal Im just stepping into the world of pedals for acoustic 👍
Nice!
Thanks..best review...had this pedal with the whole align series...sold that board to simplify the set up to a venue and align reverb...but just re ordered the session..man I miss that pedal...subtle but adds so much sparkle to my nylon string tone...
Nice!
Great Video with consistent A/B examples! Love it. I got the NUX Optima Air based off your other video and it is great. Think I might pick up this pedal as well. The only thing I don't like about this pedal is.....the look. Thanks again!
Nice! Glad the videos could help. Cheers ; )
Many thanks, Luke. I should receive my Session pedal tomorrow. This after months of watching this video. Very helpful! Thanks again. 😎🎸👍
Awesome mate, thank you. I hope you dig it! All the best ; )
Hi! So, how are you satisfied with session after clouple months?
Thanks Luke. I have had trouble figuring out how to use mine and you have shed a lot of light on it.
Awesome! I'm glad it helped ; )
you probably dont care at all but does anyone know of a way to log back into an instagram account?
I was dumb lost my login password. I appreciate any help you can give me
@Moises Asa Instablaster :)
@Muhammad Emmitt Thanks for your reply. I got to the site on google and Im in the hacking process atm.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Muhammad Emmitt It worked and I finally got access to my account again. Im so happy!
Thanks so much you really help me out!
That's a good review, you explained the pedal very well. Thanks very much.
Cheers mate!
It gives a fat round presence that you may not take much note of until it's taken away. 😎
Fantastic tone and awesome video. Thanks for sharing.
No worries, cheers!
Thank you so much for the very informative video on session! Just bought the session and wondering what is the best way of chaining this in my rig. So do you reckon:
Acoustic guitar -> Polytune 3 -> Venue (efx loop) -> session -> Chorus -> Blue sky -> Venue (efx loop) -> DI out
Or
Acoustic guitar -> Polytune 3 -> Session -> Venue (efx loop) -> Chorus -> Blue sky -> Venue (efx loop) -> DI out
Thanks in advance!
I'd experiment with both options. The benefit of having the session first is that any additional EQ moves won't affect the comp or saturation. However, you may prefer the Session after the EQ as a type of "finishing" effect. So both would work. It's just really about what you like the sound of ; )
Thanks for the review!
No worries ; )
great video! so you put it after something like the Optima Air in the chain, right?
Yeah, that's how I'm using it. But the Session Pedal can really go anywhere. Just experiment to see what you like ; )
great video. thanks!
Awesome! Glad you found it helpful ; )
thanks that was great
Can I have a list of your pedals and the order in which your using them??
Still really like my Mama Bear preamp. This seems to be in a similar vein.
Cool, I'll have to check it out!
Sounds great, gonna purchase the Session pedal! What acoustic are you playing here and strings?
Thanks! I'm playing a Maton EST60C. (I don't think they make them anymore though.) My strings are just standard D'Addario 12's... Hope that helps ; )
Is this the #1 LR Braggs Acoustic pedal or would u go Reverb or the EQ one? Or something else?
Im new to pedals. Im an Acoustic-Electric player.
I love the Session pedal! It's pretty subtle though... If you're new to pedals, you might be better looking at more of an 'all-in-one' unit like the LR Baggs Venue DI... Hope that helps.
@@lukezecchin it does. Thanx
Hi. Wonderful video. Just a quick question. I have a set of new LR baggs pedals and Im wondering in what order I should set them up.
Lr baggs venue di
Lr baggs sesssion
Lr baggs reverb
Thanks! Awesome, those pedals should sound great together ; ) If you're running into an acoustic amp... I'd probably go: the Venue, into the Session, into the Reverb. (Though, you might want to try swapping the Session and Venue around to see which you prefer). However, if you're mainly using the DI 'Output' of the Venue... I'd simply run both the Session and Reverb pedals in the 'Effects Loop' of the Venue. This will give you a more versatile setup and would probably be the option I'd recommend. Hope that helps!
I have a Sennheiser XSW pedal (doubles as a tuner), NUX Optima Air, LR Baggs Session, Strymon Blue Sky, Boss RC-1, and Orange Acoustic Amp. Which order would you recommend for the best signal chain? Occasionally it will go into an amp, but 8 times out of 10 it will run into a stage box which will go into the PA system. Thank you!
No worries. I suggest trying...
Wireless System > Optima Air > (Session > Looper - both in the Optima Air FX loop) > Blue Sky.
However, if you want to run the Optima Air as your main DI, you could also try the Blue Sky in the effects loop too. Additionally, you might prefer having your looper after the Blue Sky if you like being able to change the reverb sound on some layers. Hope that helps!
I would in general terms always aim for preamp>eq>compressor>reverb&delay. But you could switch reverb&delay to go before compression. And try to high pass filter at around 80-100hz before compressor aswell. And if you use dramatic tone shaper put it right after preamp.
Thanks for the video, Could you recommend slightly more accessible brands?
No worries, check out my review of the NUX Optima Air: ruclips.net/video/z62NWdjtjr0/видео.html
Can the LR Baggs Session Pedal be used with an acoustic violin?
I haven't tried it. But I think this pedal would work well on most acoustic sources... So, it would probably sound nice on violin. That said, it depends on the pickup though. If it's a little spot mic, running into compression might cause unwanted feedback. So it's really something you'd have to test out. Hope that helps.
@@lukezecchin Thank you so much!
Luke, I noticed that you have some plastic pedal switch covers on your pedals that increases the surface area for easier activation. Can you explain what they are and where to get them, please? They are just what I need. Thanks, Warren
Yep, they're called Pedal Toppers. A number of companies do them. The ones I'm using here are the Mooer Candy Toppers. All the best!
Great video! I have a nylon string with a built-in piezo pickup that loses its natural tone a bit when plugged in. I would like to boost the volume in a live setting and maybe enhance the tone a little bit, would you recommend this pedal for that or would it be too subtle?
Yep, this would be a great pedal in that scenario. You could also check out their Align Series EQ (or even their VoicePrint DI pedal) for some other great options too. Hope that helps ; )
Hi! Can I ask if you put the Nux pedal before the comp? Thx!
On this board, I'm running the comp in the loop of the NUX. (Which places it after the IR and EQ. But before the reverb). Cheers.
@@lukezecchin Thx for the reply! And stellar playing btw! Cheers
Hi, I'm curious. Does the Session pedal by LR Baggs, colour the sound when the pedal is turned off? Lets say that the Session pedal by LR Baggs, is not in the chain, can you tell the difference. From when its in the chain, but turned off.
No, it's true bypass. That said, once it's on, it's not really a pedal I'd turn off anyway ; )
👍🏿🤘
What pedals do you have for your acoustic guitar set up? I've been wanting to start a pedal set up and this whole thing looks beautiful.
Cheers! I've posted a full walkthrough video of the entire pedalboard here: ruclips.net/video/hDhEw2tq2C0/видео.html. The video outlines all of the stuff I've used as well as my main concept behind building the board. Hope that helps ; )
@@lukezecchin just seeing this now. Thanks man!
@@tompurrazzo No worries ; )
So on mine I can’t use the gain at all. Like I can’t even turn it past the first hash before it starts lighting up the clip indicator. I’ve even tried turning the pick up all the way down, and that allows me to SLIGHTLY bump the gain to like maybe the 3rd or 4th hash, then starting clipping again. I do play pretty hard but I don’t have any issues out of any of my other pedals. Playing a PRS Angelus SE A60E. HELPPPPPPP!
Sounds like you might need to get in touch with LR Baggs support. Just shoot a short clip of the issue on your phone for them. If the pedal is faulty they should be able to help you out. Hope that helps!
I know seems like a ridiculous question but where do you get your funky button covers from please?
Hey, I'm using these: www.mooeraudio.com/product/Mooer-Candy-77.html
What are those plastic things on top of your pedal buttons?
Hello, question re your optimal air nux, I have a travel guitar that has a horrible piezo pickup. Before changing it out I was wondering if the it on it can make it sound a little better. How can I get your it....and what pick do you have on your guitar
Hey, I have an AP5 pickup from Maton. Yeah, IR's might improve the sound of your guitar... However, they'll probably work a lot better with a pickup that already sounds relatively balanced. Preamp pedals work to enhance what's there. So it really depends how bad the pickup quality is to start with...
Hi, may i know what kinda patch cable you're using? I'm referring to the flat ones.
Yep! I really like these ones: ruclips.net/video/GaArs1d3oSk/видео.html
The RockBoard Flat Patch cables Gold Series are also another great compact option. Hope that helps ; )
Thank you for the informative post. I am in the process of putting a small acoustic pedal board together. I currently have the LR Baggs Venue and TC Helicon Harmony Singer 2. I am considering purchasing the LR Baggs Align series Reverb and Session. Could you recommend the chain order of the 4 pedals on the board? Thanks in advance.
No worries! It's hard to say, without knowing exactly how you'll be using your setup. I'm not that familiar with the Singer pedal. However, usually I'd place any pitch effects first in chain. So I'd probably suggest: Singer 2 > Session > Reverb > Venue
I'd also probably place the Session and the Reverb in the FX loop of the Venue. That way you have a clean signal hitting the tuner/front end of the Venue.
Anyway, hope that helps!
@@lukezecchin Thank you for getting back This helps quite a bit.
@@wallys123 Awesome. Best of luck!
Hi would this improve the tone when playing into a Bose s1 pro amp. I’m playing with a K&k pure mini and the sound is ok but I’m looking for that warm fuzzy electro acoustic tone that is forgiving when strumming without that clear pick out every brittle tone. ( if that makes sense). I am certainly hearing that tone I’m after but are you using some other magic. Cheers
Hey! I'm not sure exactly what you're after... But if you're looking for something to add some subtle compression and thickness, the Session pedal is a great shout. You could also check out their Session DI for a bit of extra functionality too. Hope that helps.
@@lukezecchin thanks, I am just a bedroom rockstar and I am new to plugging in. I would like to try pedals out with my Bose s1 pro amp but the local gear shops have limited choice and stock. The sound I was hearing from your review was nice a warm but your guitar also sounded good before you used the pedal. What other pedals do think might be worth checking out.thanks
@@dw1208 There are stacks of great sounding pedals for acoustic guitar. LR Baggs do awesome high-quality stuff. But, depending on your budget, there's plenty of other cool sounding, all-in-one multi-effects too. FYI: If you want to check out the full pedalboard I featured in this video, you can check it out here: ruclips.net/video/hDhEw2tq2C0/видео.html
@@lukezecchin thanks
What amp are you using?
The Fishman Loudbox Mini. Great little acoustic amp ; )
How would it work on a nylon string guitar?
I haven't tried it... But if the guitar has a nice pickup, I assume it would sound great ; )
Thank you for responding.
Sir what amp you’re using on this set-up?Thanks.
Hey! I'm using a Fishman Loudbox Mini. Great little amp ; )
What amp are you using the DI out from?
It's a Fishman Loudbox mini... Great little amp ; )
Interesting review - seems like the pedal's impact is subtle....barely detectable really!
Question I need a preamp is this a preamp?
Not really. A dedicated preamp will give you more tone shaping options. This is more of a tone enhancer pedal. Hope that helps.
@@lukezecchin Well I need some thing the boost up my volume because I play at a church and I have my volume all the way up on my guitar and in the back they have my volume all the way up but they can’t hear me so they told me that I need a preamp to boost up gain and volume
@@vannygorge Yes, this can certainly boost the volume of your guitar if needed. You could also check out the LR Baggs range of great DI's, they're probably closer to what you need. Otherwise, any simple 'clean boost' pedal will give you more signal from your guitar. Cheers.
@@lukezecchin thanks man I appreciate it and plus I already use a DI it’s a radial pro
You used a guitar that sounds great without the pedal.
4:10 I'm struggling to hear much of a difference too!
Hmm I like the sound without the pedal more
I still don't get it! What's doing what?
I have this pedal, it 1) inverts the phase (NO WAY!) for no reason. 2) compression is not compression, it simply cut low-mids always 3) saturate is less than decent. I took it off the pedalboard. The "very subtle, very subtle" thing on all reviews mean something.
I'll reserve my comments. BUT make sure you have a return policy if you get one.
What was your experience
You put the same comment on every review,so your not reserving your comments at all, just the same one ten times with no explination
The Session pedal does sound nice but it’s really God Awful Ugly! The FAKE wood actually looks super fake & cheap.