are the bearings on the crank shaft the same size? on my ts420, it looks like one of the bears is a 15mmx35mm by 11mm. the dealer sold me two of the same bear sizes but i think my unit is older and uses two different sizes.
Servus Bikedoctor, why you document in english? I got a quotation from a Stihl dealer, but the price for zylinder is very, very high and am honast, the fixing of exhaust is a missconstrution. Do you know a a good dealer for Stihl parts? Thank you Toni
You don't do a psi and vac test on the crankcase what do you think will happen if you have a air leak especially on that aftermarket piston and cylinder
Is there a reason why you don't use any lubricant or grease when you're re-assembling the main shaft and bearings? Seems like it would slide on a little easier. Enjoy your vids
I never use lubricant on the outside of bearings bc if it goes bad the outer ring can slip in the housing and destroy it. You definitely do not want that to happen.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
The assembly was fun to do. I like how easy but genius these machines work and I learned a lot. Hope the video helps you!
Thank you for sharing the TS 420 rebuild and assembly. I am doing this rebuild currently and your video is very helpful.
Thank you
Exelente colega muy buen trabajo
You make it look easy. Great job!
Thank you :-)
Great cleaning job
Do you know what the factory settings are for the H and L carb screws?
No sorry
Top tip... Remove the ears from the circlips, they tend to vibrate and either break off or the circlip works its way out! 👍
Thank you
are the bearings on the crank shaft the same size? on my ts420, it looks like one of the bears is a 15mmx35mm by 11mm. the dealer sold me two of the same bear sizes but i think my unit is older and uses two different sizes.
They aren't :-/ I ordered two of the same size and stopped bc one didn't fit.
The one I did had 2 different sizes
After 2013 the bearings are 2 different sizes
What is the company called and what is that piece called plz 2:31
The ice spray?
Servus Bikedoctor, why you document in english? I got a quotation from a Stihl dealer, but the price for zylinder is very, very high and am honast, the fixing of exhaust is a missconstrution. Do you know a a good dealer for Stihl parts? Thank you Toni
Hi, I bought only after market parts online
Where can I buy accessories (cylinder and carburetor)
You will find different shops online
Does crankshaft for 420 works on 480
I don't know
Ok thanks for answering my question
Do you know where I can get parts after market
I don't want to name any bc of advertisements
Nice music - rebuild Aprilia bring me here. How many cc is in this engine saw?
Thank you for your comment. I don't know to be honest.
You don't do a psi and vac test on the crankcase what do you think will happen if you have a air leak especially on that aftermarket piston and cylinder
Next time I do that
Is there a reason why you don't use any lubricant or grease when you're re-assembling the main shaft and bearings? Seems like it would slide on a little easier. Enjoy your vids
I never use lubricant on the outside of bearings bc if it goes bad the outer ring can slip in the housing and destroy it. You definitely do not want that to happen.
💪🏼👏🏼👍🏼
Great job is not easy.
Thank you
Se le hecha aceite adentro donde va el piñón
I don't understand 😊
Buen bidio
Alittle tricky but I did it
Yess
Чем моете?
All purpose degreaser