If your looking at this quad and believe you might fly outside only or in larger indoor spaces I highly reccomend checking out the Flywoo FlyLens 85 ⤵ FlyWoo FlyLens 85 Video Review - ruclips.net/video/ILOGF1ENSXk/видео.html FlyWoo FlyLens 85 - tinyurl.com/2hhrs752 FlyLens85 from RaceDayQuads - tinyurl.com/5h7wcz3m FlyLens85 from GetFPV - tinyurl.com/dhyxsdvr From Banggood - tinyurl.com/4ewr9fnp (N America Coupon "BGNick2022" 8% off) FlyLens 85 HD Review - ruclips.net/video/ILOGF1ENSXk/видео.html
Can't wait to try a 75. We love the 85. My 12 YO son has been bashing the heck out of his over the holiday in a parking lot. Thing is tough as nails. He flys only full throttle. Only thing broken so far is some props and a TPU battery mount. We had the camera molex come apart on one really hard concrete hit but since I replaced it/fixed it no issues since. Anyway, looking forward to trying the rest of their stuff. It's just good.
Dang.. I had to watch the first flight twice before watching the rest of the video.. sick piloting skilz Nick! 🔥🔥🔥 Looks like solid kwad! Thanks for the deep review!
I have the 85 with Walksnail. I land hard on concrete, quite often hard enough that it bounces and ends upside down. Yeah, I am still bad at landing. The frame is in perfect shape. That rubber thing they stuck on the bottom might actually be doing its job.
Nice to see the Flylens75 now with the naked O3. I just built one and I'm enjoining since I fly pretty much inside only but as everyone that had access to both recommend the 85 I'm curios to try. Good thing they have all the same components and would be just a matter os spending another 30 dollars for the frame kit and bi-blades props.
Thanks for the video. I went with the 85 frame kit and transplanted a HappyModel Cine8, so I get 3s. The GNB 3s 850 fits in the bigger battery mount. For an HD fancy 75mm these are cool frames. Totaly agree with Analog, would make mroe sense to just get a Mob7. Bonus with the 85 you get the ultra bright LED strip.
Broke 1 of the 4 arms on the VTX mount of my flylens 85 by (I think) powerlooping into concrete lol. The plastic cracked around the M2 threaded insert. It still worked after, but I ended up swapping it out eventually. Both pieces held up fine without the foam pad apart from that rather drastic crash.
I have the the 85 03 lite and ive only had to replace props. I really really enjoy the 85. I also like the flywoo line up. Great review Nick thanks for your time !!
He cambiado dos veces la caja del vtx ahora he puesto una de tpu, la tienen a la venta desde hace poco, tambien he cambiado los protectores de helices . Saludos
Great review as usual. Loved the flight footage and the audio makes it even better. The bird chirping was nice. I think dji is gonna take my money again 😑
@@dawn_alex lol, well kinda. I don't schedule or plan them much more than 2-3 days prior to them being "live". Sometimes its my wife when she calls out "that's a lot of boxes" 😀
Are those 3-D printed slots easier to twist the snap in than the other version? I have the 75 and for the life of me I can’t swap those 3-D printed battery holders to change battery sizes!
I have found some are better than others, but I also found a method that works better for me. I put my finger in the battery slot and the twist lock is on the knuckle of the finger. Knuckle being the outside/backside of the finger. Then I press it on and focus the pressure right on my knuckle and twist. Using the knuckle seems to push the lock part a touch further down and allows turning much easier without feeling like I am tearing the mount apart.
this is one of those oddball sizes. I have a 75mm walksnail whoop that I love, but its a heavy beast. IMO, if I am going 80-85mm its going to be open prop. its just a better form factor.
I fried my walksnail 85 (dont ask) and due to the FC being out of stock ordered an HD kit. The original 85 VTX mount was pretty brittle and got broken on day 1, the HD kit came with the newer material. Also the walksnail kit shipped with the older FC, the HD kit comes with the newer white one.
@@NickBurnsFPV Lets get specific! These were ordered direct from flywoo. FlyLens 85 HD Walknsail PNP ordered 11 April 2024. Came with older FC/VTX frame. FlyLens 85 2S Drone Kit ELRS ordered 1 May 2024. Came with newer FC/VTX frame. Yes, it was an eventful few weeks...
@@NickBurnsFPV Id say there's a reasonable chance a PNP walksnail version had been sitting in the warehouse a fair bit longer than one of the DJI variants...
@@wtfmimshag i was faster, i murderd my flylens 75 walksnail withing a week by drowning the vtx like 3 weeks ago :/ ordered a 85 walksnail moonlight 2 days ago ^^
Hi Nick, I have a question, my budget allows me to buy hdzero goggles, antennas, webleed batteries and hdzero mobula 6 eco, but for the same price I can buy dji goggles 2 or integra, but I don’t know about a drone yet, here It's just that in Montreal there is essentially nowhere to fly, there is one big red zone, so freestyle is not available to me. In general, the question is: is it worth taking hdzero goggles and then just buying an external module from walksnail or buying dji goggles and a drone like the geprc lr40 right away? And in your opinion what is more fun to fly?
My opinion is pretty biased. I think whoops are far more fun than a long range quad. Long range quads aren't designed to do much other than the obviously flat exploratory flight, and they need a fair bit of space to explorer or I would think it gets pretty old. I would hope you can fly a whoop in far more places near you and inside, parking garages etc. The cost side is really hard to evaluate. If the most important flight factor is image quality and penetration, DJI would be the logical choice. If the most important factor is flight performance and latency then HDzero/analog would be the likely choice. Walksnail is an option somewhere in the middle of those two but doesn't compete on the latency with HDZero/Analog.
@@NickBurnsFPVThank you very much, Nick! At the first I was thinking about buying a long range drone to fly somewhere near mountains, then I realised that I'll use then all my budget for one flight per 1-2 months. After I lost my Nazgul (freestyle), I wanted to buy another freestyle drone, but I moved to Montreal and suddenly I didn't find any spots to fly. Here is pretty high charge for flying in "red zones" without permission and specific licence, but here is a whole city is a red zone, so I could fly only in country side. But again I may could to get out only 1-2 times per month and this is not fun. Of course I can make some content once a month on freestyle with dji o3 on it or using long range, but all other time i'll keep sitting without flying. So I checked if its possible to take a tiny whoop on the streets/parks and it seems like I have a lot of nice spots with out that much people out there. Besides, this is still Canada, we have really bad weather sometimes (usually) and only one way how to keep this hobby rolliing is to fly inside. But in other hand, not everyone could enjoy raw dvr from hdzero, if I'll start posting something. Anyway, first of all it's must be fun for me) Thanks again for your support and videos all this years)
@@Strelincthe fun factor of tiny whoops is hard to beat. I bought into HDzero after trying to go small with the 03 (naked fly lens 85) and still think it’s the best decision I’ve made in this hobby. The 03 and DJI are great but once you get under 3.5” you will notice it’s short comings. I basically only run HDzero now and have everything from 65mm-5”. 3.5 and up I run an action cam so dvr doesn’t matter. On my 03 5” I still run an action cam.
@mwhizzler476 I really appreciate that. But the thing is that in Quebec, I need to register my drone and get several licenses. And with an action camera, it will be more than 250 grams. It's like, yeah, of course I can fly somewhere far from the city, but it's not fun. Obtaining the licenses is not that hard tho. Anyway, I am still waiting for mobula6 hdzero (2024, eco) be in stock.
@@Strelinc gotcha, yea tough call. If you want to do 3.5” freestyle sub 250g with 4k. 03 is hard to beat. Could always go HDzero and look into walksnail VRX and run WS off HDzero goggles. Get the whoop now and have fun and if you want to get some 4k footage on a bigger build use that.
I have the Naked Flylens 85. I don’t fly it very much, but have broken that bottom cage twice bottoming out on power loops. I do agree with that bar on the naked 03! FPV nightmare fuel lol
@@NickBurnsFPV yes. Inside on concrete pad. When I was still trying to convince myself it was small enough for light inside freestyle lol. It is good to cruise around inside
This swoopy doopy stuff is all well and good. But what I'm looking for is something that can fly slowly so I can look around and enjoy the feeling of flying... something that flies owly for about 15 mins. Do any of these little drones allow that?
There are many flight styles enjoy across drones/FPV. At this time the smallest fpv quad to get 15 minutes of flight would be something in the 4 inch prop size or larger with a 3000+mah lion battery. There might be a 3.5inch to on the right size battery but nothing I have flown with the batteries I have is capable of 15 minutes of flight.
Thanks for the review! Flywoo just released a Moonlight version of the Flylens 85. I've been looking for a 2inch whoop for park freestyling and only fly WS, would you rec the GoFilm20 or the Moonlight Flylens 85?
@@NickBurnsFPV So would u say the Flylens 85 is your all time favourite and recommended 2 inch whoop for any system? I was thinking between modding a Pavo20 or Flylens85 to fit the moonlight but now there is an official version for the 85...
@@RioLai_ No, it depends on the day but I mostly fly analog. I still enjoy my custom rocket race the most. I tend to fly the flylens85 and the avionrc 2.5inch when I fly DJI. I fly analog 60+% of the time.
The motor mounting option and the Vtx tray material were already upgraded before your "old" version. They used to have only 3 holes and be 3d printed respectively. I have the Flylens85 o3 lite. I’ve broken two of the battery trays . . . but I like indoor flights and dives... Onewheel GT-S takes me to Chases and Dives ruclips.net/video/gFygL2f4ZDI/видео.html
I also have a Flylens 85 on Walksnail since January and I haven't been able to break anything in it except the lens, but I hit the stoneware with the camera😂
tattu 550 batteries fits perfect on the 750 tray!! you should give them a go! thats what i use with this one. and yes, i have broken 3 vtx trays, they also sell a tpu one at fly woo, that one is more durable
Hey Nick! Thanks for the new video on this new version. You mention that some pros say that you can`t sell footage from the O3 and that the mininum standard is GoPro footage but that`s just GoPro fanboys being close-minded and being DJI haters. They don`t want people with O3 cinewhoops to steal their business, lol! I know several people that DO sell their O3 footage directly to clients. Nothing wrong with that footage at all. It looks great. I`m an O3 user myself. And for the redesigned low position camera mount, as far as I can tell, I believe it`s to counter the propensity for the lens assembly to pop out of the rubber grommets after a crash, which a lot of Flylens 85 and 75 users have been complaining about, as you probably already know. The lens unit now protrudes far less out of top of the mount, unlike the previous version. Cheers!
Good to know that pros are selling O3 footage. That isn't something I have been hearing or heard about. That's kind of obvious after my video :) Thank you for providing that information.
I am still here. I just haven't had any new products to post reviews about. I don't tend to find reasons to post or go outside of the micro fpv space. Videos should be coming soon though.
I'd get the Wasp version...Don't care about 4K. I think people have forgotten how great the image quality is on the Wasp. Super clear for flying FPV! Lighter than 03 and way cheaper! Nick, try using your Nano Tech 300 mah favorites for RIPPING! Just imagine how much lighter the flight weight will be! As you know, "It's all about weight with whoops!" I bet you'll still get adequate flight time with the 300mah because it's soooo much lighter, especially with the Wasp camera. Worth a try, because a RIPPER doesn't care too much about flight time. I've found Flywoo always recommends very large and heavy batteries, catering to NEWBIES who seem to always be "Hung Up" on flight time. We know that's the wrong way to go to get a drone to fly great!!! Thanks for the review! My 2" 85mm whoop with naked Vista and Nebula Pro Nano comes in at only 60g, so the manufacturers can do a MUCH BETTER job of reducing weight! Oh well, always better to build our own. 😁👍
at some prop size, with some power level , added to the right battery we can have all 3 even the newbs lol. this is a bad design too much weight for these props
Brushless motors are water proof/resistant. Its the electronics we need to worry about getting wet and shorted. With most quads in the top battery mount position the AIO or the vtx (now) would likely be the first get wet and damaged. I have heard the O3 is pretty hardy but don't know about it surviving in water cases
![☀ Солидная кроха для уникальных больших задач. [Flywoo FlyLens 75 2S]](http://i.ytimg.com/vi/KGOdu5wP8ew/mqdefault.jpg)
![☀ Солидная кроха для уникальных больших задач. [Flywoo FlyLens 75 2S]](/img/tr.png)
If your looking at this quad and believe you might fly outside only or in larger indoor spaces I highly reccomend checking out the Flywoo FlyLens 85 ⤵
FlyWoo FlyLens 85 Video Review - ruclips.net/video/ILOGF1ENSXk/видео.html
FlyWoo FlyLens 85 - tinyurl.com/2hhrs752
FlyLens85 from RaceDayQuads - tinyurl.com/5h7wcz3m
FlyLens85 from GetFPV - tinyurl.com/dhyxsdvr
From Banggood - tinyurl.com/4ewr9fnp (N America Coupon "BGNick2022" 8% off)
FlyLens 85 HD Review - ruclips.net/video/ILOGF1ENSXk/видео.html
Can't wait to try a 75. We love the 85. My 12 YO son has been bashing the heck out of his over the holiday in a parking lot. Thing is tough as nails. He flys only full throttle. Only thing broken so far is some props and a TPU battery mount. We had the camera molex come apart on one really hard concrete hit but since I replaced it/fixed it no issues since. Anyway, looking forward to trying the rest of their stuff. It's just good.
this is the perfect video from a flylens75 owner, great rip and review. your survey asked great questions and this video really nails it.
Dang.. I had to watch the first flight twice before watching the rest of the video.. sick piloting skilz Nick! 🔥🔥🔥 Looks like solid kwad! Thanks for the deep review!
I have the 85 with Walksnail. I land hard on concrete, quite often hard enough that it bounces and ends upside down. Yeah, I am still bad at landing. The frame is in perfect shape. That rubber thing they stuck on the bottom might actually be doing its job.
Nice. So the vtx compartment is holding together for you. Thank you for the update.
@@NickBurnsFPVFlywoo also sells a tpu version of the bottom cage
Same for me. I have the HDZero Flylens 85 and it's taken some hard hits on direct concrete and still going strong. Frame is still fine.
Love the channel 👊🏾
Missing your videos, Im hoping you are having a busy life and not for other reasons. Thanks for all your help
Just a slow time for new products and reviews. videos will be coming shortly as new items start launching again.
Nice to see the Flylens75 now with the naked O3. I just built one and I'm enjoining since I fly pretty much inside only but as everyone that had access to both recommend the 85 I'm curios to try.
Good thing they have all the same components and would be just a matter os spending another 30 dollars for the frame kit and bi-blades props.
yes a frame swap with a PID tune tweak is likely also needed.
Thanks for the video. I went with the 85 frame kit and transplanted a HappyModel Cine8, so I get 3s. The GNB 3s 850 fits in the bigger battery mount. For an HD fancy 75mm these are cool frames. Totaly agree with Analog, would make mroe sense to just get a Mob7. Bonus with the 85 you get the ultra bright LED strip.
The led strip is a fun addition. The flylens85 frame holding together with the 3s battery? I presume your using a strap for the battery?
@@NickBurnsFPV Super fun on 3s. I'm using the TPU mounts, they hold on very well. I couldn't find a way to toilet tank the battery with a strap.
@@amin0_acid310 So you made a custom TPU mount? I am assuming there isn't a 3s battery fitting the 2s battery mount.
@@NickBurnsFPV I’m using the tpu holders that came in the kit. Biggest one fits the biggest 3s I got an 850. I can get 450’s to fit the 750 one too.
Broke 1 of the 4 arms on the VTX mount of my flylens 85 by (I think) powerlooping into concrete lol. The plastic cracked around the M2 threaded insert. It still worked after, but I ended up swapping it out eventually. Both pieces held up fine without the foam pad apart from that rather drastic crash.
Great review. Nice flying, thanks for the ride.
I have the the 85 03 lite and ive only had to replace props. I really really enjoy the 85. I also like the flywoo line up.
Great review Nick thanks for your time !!
Do you find the same with the lite/naked O3s that back to back flights need some time to cool the O3 before the next flight?
Absolutely humming along!
Awesome flying and review, Nick! 😃
That FC would be sweet for an HD 2 incher!
Anyway, stay safe there with your family! 🖖😊
He cambiado dos veces la caja del vtx ahora he puesto una de tpu, la tienen a la venta desde hace poco, tambien he cambiado los protectores de helices . Saludos
Nice to see a walksnail version. I love my meteor85 walksnail.
I love your indoor rip. Nice flyin, Cool quad. Peace🙂
Thank you
Great review as usual. Loved the flight footage and the audio makes it even better. The bird chirping was nice. I think dji is gonna take my money again 😑
Awesome! I also saw that Flywoo launched a moonlight version, and I want to give it a try.
yep, they cover all the video systems.
My flylens85 also has two ribs broken in the vtx compartment (naked O3) after crash. I applied cement glue and it's holding up so far.
Thank you for the update information.
Bro, you got any giveaways coming up?!...
lol. I generally don't announce them, they happen organically.
@@NickBurnsFPV I see.. thats a nice way to say 'w@tch all my videos' 😁.
Anyways love your videos man. 👍
@@dawn_alex lol, well kinda. I don't schedule or plan them much more than 2-3 days prior to them being "live". Sometimes its my wife when she calls out "that's a lot of boxes" 😀
Are those 3-D printed slots easier to twist the snap in than the other version? I have the 75 and for the life of me I can’t swap those 3-D printed battery holders to change battery sizes!
I have found some are better than others, but I also found a method that works better for me. I put my finger in the battery slot and the twist lock is on the knuckle of the finger. Knuckle being the outside/backside of the finger. Then I press it on and focus the pressure right on my knuckle and twist. Using the knuckle seems to push the lock part a touch further down and allows turning much easier without feeling like I am tearing the mount apart.
this is one of those oddball sizes. I have a 75mm walksnail whoop that I love, but its a heavy beast. IMO, if I am going 80-85mm its going to be open prop. its just a better form factor.
open prop does fly longer and perform better forsure.
I fried my walksnail 85 (dont ask) and due to the FC being out of stock ordered an HD kit. The original 85 VTX mount was pretty brittle and got broken on day 1, the HD kit came with the newer material. Also the walksnail kit shipped with the older FC, the HD kit comes with the newer white one.
If you don't mind can you give me a timeframe on when you bought and received your flylens85?
@@NickBurnsFPV Lets get specific! These were ordered direct from flywoo.
FlyLens 85 HD Walknsail PNP ordered 11 April 2024. Came with older FC/VTX frame.
FlyLens 85 2S Drone Kit ELRS ordered 1 May 2024. Came with newer FC/VTX frame.
Yes, it was an eventful few weeks...
@@wtfmimshag ah gotcha. Thank you. Good to know at least flywoo updated their stock to reflect the changes.
@@NickBurnsFPV Id say there's a reasonable chance a PNP walksnail version had been sitting in the warehouse a fair bit longer than one of the DJI variants...
@@wtfmimshag i was faster, i murderd my flylens 75 walksnail withing a week by drowning the vtx like 3 weeks ago :/ ordered a 85 walksnail moonlight 2 days ago ^^
Hi Nick, I have a question, my budget allows me to buy hdzero goggles, antennas, webleed batteries and hdzero mobula 6 eco, but for the same price I can buy dji goggles 2 or integra, but I don’t know about a drone yet, here It's just that in Montreal there is essentially nowhere to fly, there is one big red zone, so freestyle is not available to me. In general, the question is: is it worth taking hdzero goggles and then just buying an external module from walksnail or buying dji goggles and a drone like the geprc lr40 right away? And in your opinion what is more fun to fly?
My opinion is pretty biased. I think whoops are far more fun than a long range quad. Long range quads aren't designed to do much other than the obviously flat exploratory flight, and they need a fair bit of space to explorer or I would think it gets pretty old. I would hope you can fly a whoop in far more places near you and inside, parking garages etc. The cost side is really hard to evaluate. If the most important flight factor is image quality and penetration, DJI would be the logical choice. If the most important factor is flight performance and latency then HDzero/analog would be the likely choice. Walksnail is an option somewhere in the middle of those two but doesn't compete on the latency with HDZero/Analog.
@@NickBurnsFPVThank you very much, Nick! At the first I was thinking about buying a long range drone to fly somewhere near mountains, then I realised that I'll use then all my budget for one flight per 1-2 months.
After I lost my Nazgul (freestyle), I wanted to buy another freestyle drone, but I moved to Montreal and suddenly I didn't find any spots to fly. Here is pretty high charge for flying in "red zones" without permission and specific licence, but here is a whole city is a red zone, so I could fly only in country side. But again I may could to get out only 1-2 times per month and this is not fun. Of course I can make some content once a month on freestyle with dji o3 on it or using long range, but all other time i'll keep sitting without flying. So I checked if its possible to take a tiny whoop on the streets/parks and it seems like I have a lot of nice spots with out that much people out there. Besides, this is still Canada, we have really bad weather sometimes (usually) and only one way how to keep this hobby rolliing is to fly inside. But in other hand, not everyone could enjoy raw dvr from hdzero, if I'll start posting something. Anyway, first of all it's must be fun for me)
Thanks again for your support and videos all this years)
@@Strelincthe fun factor of tiny whoops is hard to beat. I bought into HDzero after trying to go small with the 03 (naked fly lens 85) and still think it’s the best decision I’ve made in this hobby. The 03 and DJI are great but once you get under 3.5” you will notice it’s short comings. I basically only run HDzero now and have everything from 65mm-5”. 3.5 and up I run an action cam so dvr doesn’t matter. On my 03 5” I still run an action cam.
@mwhizzler476 I really appreciate that. But the thing is that in Quebec, I need to register my drone and get several licenses. And with an action camera, it will be more than 250 grams. It's like, yeah, of course I can fly somewhere far from the city, but it's not fun. Obtaining the licenses is not that hard tho. Anyway, I am still waiting for mobula6 hdzero (2024, eco) be in stock.
@@Strelinc gotcha, yea tough call. If you want to do 3.5” freestyle sub 250g with 4k. 03 is hard to beat. Could always go HDzero and look into walksnail VRX and run WS off HDzero goggles. Get the whoop now and have fun and if you want to get some 4k footage on a bigger build use that.
I have the Naked Flylens 85. I don’t fly it very much, but have broken that bottom cage twice bottoming out on power loops. I do agree with that bar on the naked 03! FPV nightmare fuel lol
I presume this is on concrete or asphalt?
@@NickBurnsFPV yes. Inside on concrete pad. When I was still trying to convince myself it was small enough for light inside freestyle lol. It is good to cruise around inside
Or that I was good enough to freestyle it inside*
@@mwhizzler476 inside flight with a 2 inch is challenging to fly very aggressively
@@NickBurnsFPV☝🏼 this is very true!
This swoopy doopy stuff is all well and good. But what I'm looking for is something that can fly slowly so I can look around and enjoy the feeling of flying... something that flies owly for about 15 mins. Do any of these little drones allow that?
There are many flight styles enjoy across drones/FPV. At this time the smallest fpv quad to get 15 minutes of flight would be something in the 4 inch prop size or larger with a 3000+mah lion battery. There might be a 3.5inch to on the right size battery but nothing I have flown with the batteries I have is capable of 15 minutes of flight.
@@NickBurnsFPV Outstanding. Thanks for the information. 👌
Check out the HappyModel Crux35 v2 (3.5” props)…I have the runcam wasp version and can get 15 minute flights with a 4s 850mah if I’m just cruising.
@@krish3033 Fantastic... thanks - I will give them a try.
@NickBurnsFPV I love your videos man Thank you so much for providing me with content to watch. What a great pack you ripped 10/10 landing
Thankfully I didn't wang myself on that landing. :)
how would you compare the prop noise with this flylens 75 with the Pavo Pico 45mm props?
to the best of my recollection the 45mm where louder or more ear piercing.
Thanks for the review! Flywoo just released a Moonlight version of the Flylens 85. I've been looking for a 2inch whoop for park freestyling and only fly WS, would you rec the GoFilm20 or the Moonlight Flylens 85?
The flylens85 is more versatile, that is what I would go for.
@@NickBurnsFPV So would u say the Flylens 85 is your all time favourite and recommended 2 inch whoop for any system?
I was thinking between modding a Pavo20 or Flylens85 to fit the moonlight but now there is an official version for the 85...
@@RioLai_ No, it depends on the day but I mostly fly analog. I still enjoy my custom rocket race the most. I tend to fly the flylens85 and the avionrc 2.5inch when I fly DJI. I fly analog 60+% of the time.
The motor mounting option and the Vtx tray material were already upgraded before your "old" version. They used to have only 3 holes and be 3d printed respectively. I have the Flylens85 o3 lite. I’ve broken two of the battery trays . . . but I like indoor flights and dives... Onewheel GT-S takes me to Chases and Dives
ruclips.net/video/gFygL2f4ZDI/видео.html
ah, the first version I got must have been a second run or something down the line. Thank you for that detail.
I also have a Flylens 85 on Walksnail since January and I haven't been able to break anything in it except the lens, but I hit the stoneware with the camera😂
Thank you for sharing. Stone vs lens ouch.
tattu 550 batteries fits perfect on the 750 tray!! you should give them a go! thats what i use with this one.
and yes, i have broken 3 vtx trays, they also sell a tpu one at fly woo, that one is more durable
oh dang, I didn't think of trying a size of battery in the "not the right" size battery holster/tray.
lol, that flight was awesome! 🤩💪🏼
I have flylens 75 and I broke the part where screws tight in
I am using the 3d printed part now
Where the brass nut is?
@NickBurnsFPV is still attached to that plastic vtx cover
I wonder how people get away from breaking that part when they crash....
@@juno0314-o9o hard to say, the sponge pad inplace? All crashes are unique, some peoples crashes might be mild others could be wild.
Hey Nick! Thanks for the new video on this new version. You mention that some pros say that you can`t sell footage from the O3 and that the mininum standard is GoPro footage but that`s just GoPro fanboys being close-minded and being DJI haters. They don`t want people with O3 cinewhoops to steal their business, lol! I know several people that DO sell their O3 footage directly to clients. Nothing wrong with that footage at all. It looks great. I`m an O3 user myself.
And for the redesigned low position camera mount, as far as I can tell, I believe it`s to counter the propensity for the lens assembly to pop out of the rubber grommets after a crash, which a lot of Flylens 85 and 75 users have been complaining about, as you probably already know. The lens unit now protrudes far less out of top of the mount, unlike the previous version. Cheers!
Good to know that pros are selling O3 footage. That isn't something I have been hearing or heard about. That's kind of obvious after my video :) Thank you for providing that information.
@@NickBurnsFPV You're welcome. Cheers!
Really like these mosquitos
what is a "light unit"?
without the external casing on the vtx and camera.
Where have you been Nick?
I am still here. I just haven't had any new products to post reviews about. I don't tend to find reasons to post or go outside of the micro fpv space. Videos should be coming soon though.
That is so cool I love it got a sneaker in the house
I'd get the Wasp version...Don't care about 4K. I think people have forgotten how great the image quality is on the Wasp. Super clear for flying FPV! Lighter than 03 and way cheaper!
Nick, try using your Nano Tech 300 mah favorites for RIPPING! Just imagine how much lighter the flight weight will be! As you know, "It's all about weight with whoops!"
I bet you'll still get adequate flight time with the 300mah because it's soooo much lighter, especially with the Wasp camera. Worth a try, because a RIPPER doesn't care too much about flight time.
I've found Flywoo always recommends very large and heavy batteries, catering to NEWBIES who seem to always be "Hung Up" on flight time. We know that's the wrong way to go to get a drone to fly great!!!
Thanks for the review! My 2" 85mm whoop with naked Vista and Nebula Pro Nano comes in at only 60g, so the manufacturers can do a MUCH BETTER job of reducing weight! Oh well, always better to build our own. 😁👍
The power demand of hd quads don't work well with the 300mah batteries. By the time we get in the air the voltage is about ~3.9/cell
at some prop size, with some power level , added to the right battery we can have all 3 even the newbs lol.
this is a bad design too much weight for these props
I wish they would bring the cinerace20 back!
"catawampus
adjective
askew; awry.
positioned diagonally; cater-cornered."
where are you
I am here :) New FPV products have been very slowly developing lately
cool
Bick Nurns ScooOT_n! 🖖👽🛸💦
Horrible design in terms of inviting damage if landing in a puddle. Industry making mistake going with this inverted prop lawnmower design IMO.
Brushless motors are water proof/resistant. Its the electronics we need to worry about getting wet and shorted. With most quads in the top battery mount position the AIO or the vtx (now) would likely be the first get wet and damaged. I have heard the O3 is pretty hardy but don't know about it surviving in water cases