Finally nice DIY replacement video without set of expensive tools (like 400$) and hydraulic press. Respect for your mechanical imagination. I was searching to confirm myself if i can do it on parking near my apartment block. Now I know that there are chances of success for this mission 😁
there should not be any tension in the shock absorbers the front wheels must necessarily have stepped on the wooden ramps You must be careful with the aluminum threads when assembling . It takes a lot of time to polish the aluminum so that the rubber bearing fits nicely. Find a garage or place for the car where you can safely do this repair. This is not a job for the front of the block! As well as finding a second person to help you, this is not a job for a single person. My twin brother helped me, I couldn't have done it on my own. I wish you success
Safety first and foremost! I know that, but rest assured. You can also put car supports under the car and thus make it stable. I do most things myself in the parking lot. If you think about safety and have an open mind, there are no impossible things to do, even in front of a block of flats
Schade , das wichtigste fehlt , wie haben sie die Alten Lager rausbekommen , das ist eigentlich das interessanteste , ansonsten gutes Video , Too bad, the most important thing is missing, how did you get the old bearings out, that's actually the most interesting, otherwise a good video mein Englisch ist nicht so gut
Könnte es den Grund sein Von mittel Konsole vibration ab110kmh und weiter zum beschleunigen?? Mein Touran 2.0 tdi hat das problem..nür beim langgestreckten..danach 200km wenn das Fahrwerk warm ist..Räder Winter und Sommer schon probiert..bitte ihre Erfahrungen teilen. VG.
Es steht alles geschrieben, dass Sie sich nicht einmal die Mühe machen, in Google Übersetzer zu übersetzen !!! !!! !!! Darunter steht, dass die alten Tampons mit Geduld und einer Handsäge entfernt wurden !
Sieht easy aus, wenn man nicht zeigt, wie sich das Kunsstoffgehäuse beim aus- und einpressen an der Ausnehmung für die Drehmomentstütze verklemmen kann. Mit der entsprechenden Vorrichtung geht es auch im eingebauten Zustand der Geräteträgerplatte schneller und sicherer.
Auf dem Kanal steht HOBBY Es ist schön, dass es UNVERSCHÄMTE wie dich gibt, die nicht 1 technisches Video gedreht haben. Ist das ein Witz 0 Abonnenten und 0 Videos? Und du wirst kritisieren?
Finally nice DIY replacement video without set of expensive tools (like 400$) and hydraulic press. Respect for your mechanical imagination. I was searching to confirm myself if i can do it on parking near my apartment block. Now I know that there are chances of success for this mission 😁
there should not be any tension in the shock absorbers the front wheels must necessarily have stepped on the wooden ramps You must be careful with the aluminum threads when assembling . It takes a lot of time to polish the aluminum so that the rubber bearing fits nicely. Find a garage or place for the car where you can safely do this repair. This is not a job for the front of the block! As well as finding a second person to help you, this is not a job for a single person. My twin brother helped me, I couldn't have done it on my own. I wish you success
Safety first and foremost! I know that, but rest assured. You can also put car supports under the car and thus make it stable. I do most things myself in the parking lot. If you think about safety and have an open mind, there are no impossible things to do, even in front of a block of flats
You did not understand me correctly. If the wheels have not stepped on something, you cannot unscrew the screws, there is tension@@kwasiiak
Very nice video. Good explanation. Good work man 💯
👍 Nice nice. Very interesting video.
Good luck with the channel.
Thanks
@@twinshobbytwinshobby3863 выставь подрамник и на розвал - схождение
perfekt gemacht danke genau so mache ich es jetzt auch lg aus franken
Wir sind froh, dass mein Zwillingsbruder und ich helfen können.
Hallo. Bin auch begeistert. Es geht auch ohne Spezialwerkzeug.
Ist bei Ihrer Vorgehensweise eine Achsvermessung notwendig?
Grüße
@@b.d.6481 Eine Achsvermessung ist nicht erforderlich
有幫助的影片。謝謝。
我很高興我們是有用的。 來自保加利亞索非亞的問候。
Schade , das wichtigste fehlt , wie haben sie die Alten Lager rausbekommen , das ist eigentlich das interessanteste , ansonsten gutes Video , Too bad, the most important thing is missing, how did you get the old bearings out, that's actually the most interesting, otherwise a good video
mein Englisch ist nicht so gut
Mit Geduld und Handsäge
Gostei muito do video Parabens
Muito top
Hallo hat mir geholfen dake 👍
Haben sie das gleiche Reparaturverfahren für den VW Touran 2017 durchgeführt?
Ich weiß nicht
Könnte es den Grund sein Von mittel Konsole vibration ab110kmh und weiter zum beschleunigen?? Mein Touran 2.0 tdi hat das problem..nür beim langgestreckten..danach 200km wenn das Fahrwerk warm ist..Räder Winter und Sommer schon probiert..bitte ihre Erfahrungen teilen.
VG.
Ziehen Sie die Schrauben für jede Schraube mit dem entsprechenden Nm an. Überprüfen Sie auch, ob die Querlenkerlager vorne jemals ausgetauscht wurden.
@@twinshobbytwinshobby3863 Vielen dank, ich versuche nach dem Urlaub alles Erledigen.
Hallo
Wie hast du raus bekommen den lager ?
@@soso94940 mit Handsäge, Schraubenzieher und 🔨
@@twinshobbytwinshobby3863 danke für antwort
Gab es ein Schlagen/Rucken beim Lastwechsel?
Es muss gut gereinigt und poliert werden, damit das Lager gut passt
Ja ohne Ende
Tiene buena pinta pero falta la extracción de la antigua pieza
Es steht alles geschrieben, dass Sie sich nicht einmal die Mühe machen, in Google Übersetzer zu übersetzen !!! !!! !!!
Darunter steht, dass die alten Tampons mit Geduld und einer Handsäge entfernt wurden !
@@twinshobbytwinshobby3863 sorry I dont understand the language
Yo tampoco entiendo español, pero estoy tratando de responderte. ¿Es tan difícil usar Google Translate?
@@twinshobbytwinshobby3863 tranqui
Sieht easy aus, wenn man nicht zeigt, wie sich das Kunsstoffgehäuse beim aus- und einpressen an der Ausnehmung für die Drehmomentstütze verklemmen kann. Mit der entsprechenden Vorrichtung geht es auch im eingebauten Zustand der Geräteträgerplatte schneller und sicherer.
Auf dem Kanal steht HOBBY Es ist schön, dass es UNVERSCHÄMTE wie dich gibt, die nicht 1 technisches Video gedreht haben. Ist das ein Witz 0 Abonnenten und 0 Videos? Und du wirst kritisieren?
How to take it out
By cutting the rubber and you will need a straight screwdriver to break the plastic
@@twinshobbytwinshobby3863 thanks bro
Video basura de como poner un soporte ja...
Danach Achsvermessung notwendig?
Там нужно сначала выставить подрамник