Видео

5W-40 Es steht zwar in der Beschreibung, aber wer sollte es lesen

@@twinshobbytwinshobby3863 warum nicht 5w-30

@@soso94940 mit Handsäge, Schraubenzieher und 🔨

@@twinshobbytwinshobby3863 danke für antwort

@@sulimansuliman12 you can look in ebay

ebay.de

1. Check how many volts the battery is. Minimum for this model is 100 Ah. This engine requires a lot of energy when starting. 2. Check with what current the battery is being charged, so you will know if your alternator is working. 3. Check the fuel filter if and when it was last changed and, accordingly, the valve which is on top of the fuel filter - it is attached with 1 metal spline. 4. Because normally these cars are already over 300,000 km and accordingly their fuel pumps go, it means that you should not have an empty tank, but always more than half full

@@twinshobbytwinshobby3863 1. 13.9-14.2. 2. Charged and good. 3. Thats changed 4. I have no problem with that and its fixed - full, half - no difference

@@sweexon2797 check with obd2 diagnostic for accumulated Errors

Ich wechsle es einmal im Jahr. Bei verschiedenen Mopeds ist die Menge unterschiedlich und jeder entscheidet, was er mit seiner Maschine macht

The machine has already been sold for scrap the reason was as far as I know that it is unprofitable to service and spends a lot of electricity and water

​@twinshobbytwinshobby3863 oh that's a shame!

Es muss gut gereinigt und poliert werden, damit das Lager gut passt

Ja ohne Ende

Ja, es ist gut und zuverlässig Der AZV-136-PS-Motor ist sparsamer im Vergleich zum 140-PS-Motor. Ich wechsle den Kraftstofffilter einmal im Jahr und den Luftfilter alle 6 Monate.

Ok dánke👍

first check the two motors for fluid.The bigger motor is for washing the headlights and is getting spoiled by lime water and blocked by rust ruclips.net/video/63d09zw2myU/видео.html

@@twinshobbytwinshobby3863 Thanks so much brother,i will check it

By cutting the rubber and you will need a straight screwdriver to break the plastic

@@twinshobbytwinshobby3863 thanks bro

there should not be any tension in the shock absorbers the front wheels must necessarily have stepped on the wooden ramps You must be careful with the aluminum threads when assembling . It takes a lot of time to polish the aluminum so that the rubber bearing fits nicely. Find a garage or place for the car where you can safely do this repair. This is not a job for the front of the block! As well as finding a second person to help you, this is not a job for a single person. My twin brother helped me, I couldn't have done it on my own. I wish you success

Safety first and foremost! I know that, but rest assured. You can also put car supports under the car and thus make it stable. I do most things myself in the parking lot. If you think about safety and have an open mind, there are no impossible things to do, even in front of a block of flats

You did not understand me correctly. If the wheels have not stepped on something, you cannot unscrew the screws, there is tension@@kwasiiak

Това е спецялен модел и ако ти прави впечатление на тавана няма греди Релинг както при 100 и А6 стандарт . Това ауди е 100 SPORT EDITION може да видиш и задните стопове са с цяла бленда .Окачването на това Ауди е както при C4 S4 Фабрично ! Затова и страничните ОГЛЕДАЛА - криля са като при А6 C4

ruclips.net/video/056D459umUc/видео.html Ето може да видиш на нашето Ауди 100 Sport Edition интериора как изглежда .В нашият канал може да видите и други наши Видеа. Поздрави от България

Ich weiß nicht

Thank you for watching !

我很高興我們是有用的。 來自保加利亞索非亞的問候。

We have installed new turbo this year and has 5 new injektors

😂😂 Diese Handschuhe sind meisten dabei wenn man ein Reparaturset bei ebay bestellt für zb. Achsmanschetten wechseln 😂😂

Mit eingeschalteten Scheinwerfern und mit dem Scheibenwaschgriff. Prüfen Sie auch, ob der zweite Motor funktioniert! ruclips.net/video/65ScvLLMBkk/видео.html

ruclips.net/video/qCJ5NyUUjfE/видео.html

I don't know but the machine is dismantled and is scrapped. The reason was as far as I know that it is unprofitable to service and spends a lot of electricity and water

It might be a Kleindienst Euro-WS

Auf dem Kanal steht HOBBY Es ist schön, dass es UNVERSCHÄMTE wie dich gibt, die nicht 1 technisches Video gedreht haben. Ist das ein Witz 0 Abonnenten und 0 Videos? Und du wirst kritisieren?

Wir sind froh, dass mein Zwillingsbruder und ich helfen können.

Hallo. Bin auch begeistert. Es geht auch ohne Spezialwerkzeug. Ist bei Ihrer Vorgehensweise eine Achsvermessung notwendig? Grüße

@@b.d.6481 Eine Achsvermessung ist nicht erforderlich

Благодаря :-) Пожелавам ти по- нова да си купиш но да е Фирмена !Понеже по - хубава кола от фирмената няма !

Thanks

​@@twinshobbytwinshobby3863 выставь подрамник и на розвал - схождение

i also forget to add pastr to my gpu

How ??? The max you can Install on Vostro 1015 is Windows 10

KNECHT, KX 178D Filterausführung: Filtereinsatz Höhe [mm]: 142,0, 142 Durchmesser [mm]: 83,0 Innendurchmesser 2 [mm]: 38