HOW TO INSTALL SOIL AND WASTE PIPE 110mm - Plumbing Tips
HTML-код
- Опубликовано: 28 апр 2017
- The first in a few videos about hot to fit and install waste pipe. 110mm size is standard in the UK. We show you how to cut, how to fit together, how to measure and how to add bosses, and branches. I hope this video helps you out!
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
**VISIT OUR SPONSORS**
www.traderadiators.com | www.stuart-turner.co.uk 
Хобби
![KFF Singapore Badminton Open 2024 | Alfian/Ardianto (INA) [7] vs. Liang/Wang (CHN) | QF](http://i.ytimg.com/vi/g0QGafkoT2o/mqdefault.jpg)
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* ruclips.net/user/timeswithjames
As an Electrician, doing his own barn conversion, I feel able to tackle the plumbing because of this channel. Shitter fitters do have some skills after all it seems. But top tip, if you spill your glue, just mop it up with some £50 notes you have laying around.
I HOPE YOU ALL enjoy as much as I enjoyed watching the guy who delivered the radiators to this job tread in 6 inches of freshly poured concrete!!!!
:D
plumberparts
are you sure the tapping sound throughout the video wasn't the delivery guy bashing his boots off.
Ha!
Did he "Hold Tight !" :)
plumberparts whu didn't you paper sand the interior of de pipe before glue it?... thats required for a sealed conection.
Brilliant video James, and very enjoyable. Thank you for your top quality advice and the detail.
top tip when drilling a boss hole make sure your drill is done up tight and the hole saw doesn't fall down the stack and stuck, so you haven't got to dig up up the group to get it out !!;)
Ha! We've all been there! I did say it but didn't make the edit in the video....
I love this guy! Straight to the point!
Thanks for the great video, these videos are a great help to me as i'm currently studying level 1 plumbing. Thanks again. :)
No worries dude!
Never seen someone use that tool for cutting the pipe 😂😂
Keep up the great work. Shoutout from Norway 🤙
Mate, you are hilarious and your vids are v. Informative!! Keep up the good work. Cheers.
I think this is a great job , I've been working in the U.K. In the plumbing and pipe fitting industry for about 4 years. this man is as good as gold. obviously we all work in a different way so we all do things differently. Would love working with him !
Ha! Thanks Kris, no worries mate!
Am a lagger to trade but this guy is one of the funniest plumbers I've seen man. #funnyguy 😂
Thanks so much for this video!! if all plumbers were as good as you and also funny!! :D :D - serioulsy, very informative and exactly wha ti was looking for
If you're welding together with solvent type glue, it's important to apply glue to both pieces before joining - also abrading the gloss off the pipe and socket, either with acetone or light sanding will give a leak free joint forever.
Thank you! Was easy after your video!
very helpful video man, thank you verry much
Thanks mateeeee!
Here in America the same stuff is done, they've got a newer style called "Pex" that I don't quite trust yet too. PVC plumbing is great, but I too am careful to stay clear of the acetone plumbing cement, when I was a teenager I enjoyed that kind of thing, but not now. Cheers from across the pond :-)
Great vid Boycott!!!!!
Aight!
F**king great job man. I love this guy.
love it ! great explanation
cheers dude!
outstanding video
Cheers dude!
Another great video!!
Thanks!
Great really usefull stuff.
So educative man thnx
Good video, cheers!
No worries!
I'm slightly confused - are you solvent welding push fit connections? I didn't think you could mix and match?
nice one James
No worries dude!
James , my soul pipe terminates in the loft with a valve on it . It’s hidden behind the false wall where the shower barn is above the bath . I want to rip out the bath and take away the false wall and move the pipe into the corner and box it in. Does it have to terminate into the loft space or can I just box it in halfway up the wall and drill a few breather holes in the ceiling ?
I know im old school ,but what happened to installing a rodding eye at the very start of al soil stacks.Is this not code anymore then,i used to do this every time when we were installing cast iron with yarned and lead filled joints ,PS great videon just asking ok.cheers pete
Love all the video's. What is the grey fitting you glued into to the black boss called? Can I use one of those to push in the metal tube from a chrome bottle trap into that goes through the wall to the soil stack outside? Cheers
In the UK the boss I have used are 2"/50mm the fitting James used was a 2" to 1 1/2" or 1 1/4" reducer which will allow him to connect the waste(s) from either the bath, basin or shower into the soil stack, however each manufacture sizing can slightly vary (+/- 1/16") to keep you in their parts catalogue because capitalism.
I’d like to switch round my sink and toilet. Cast iron shitpipe and boxed in through downstairs room so don’t really wanna have to rip it out. The toilet and sink are only about 700mm away on same wall. Is it the norm to use a 90 to connect from new shitter position (back to wall concealed cistern so I can hide the pipe run) along a short run across to another 90 into cast iron shitpipe? What kinda distance would this add to the shitter position given I’m swapping close couples to concealed
Fantastic to see
Cheers mate!
preparation is key, great work as always mate :) now for the boxing 🥊
And what a fight that was!
Lovely ole job ,top tips¡
Is that PVC? Normally around here at least, on PVC we use a primer and glue. Is there a different adhesive in the UK?
i like to use a cordless grinder for de burring pipe. corded works well too
Cracking vid, I'm an apprentice so this stuff is gold to me!! One question; you finished of the vid you had it so the toilets were back to back, can you do this?
Will be installing over the next few weeks mate and will film!
@@plumberparts where is the continuation? Can I please have a link
Why are some parts push fit with a rubber o-ring (that I guess could perish) and some parts solvent weld which all being well last to dooms day? Always struck me as being silly as I would assume what you've done there will be boxed in so it can't be an access deal, can it?
Why didn't you just use a solvent coupler with the boss ready moulded?
i'll much rather use a direct 110 by 50 by 110 tee with 50 mil branch being 45' and in combination with 45' lbow to create a seamless one piece tee. and another thing with the 50 mil strap bus that i hate is that it looks unprofesional. so yeah. nevertheless, nice work James! cheers mate
Would you guys put a slow bend on a svp?
When you show the ceiling a brown pipe can be seen that is already fitted. It is my understanding that brown (underground) pipe is not to be used internally. Is this correct?
What is that pipe he is using, it's like a push in with rubber ring inside the female end. Nothing like we use here in Australia.
Can I please have a link to the continuation of this job, please?
Please some explain why he glued a connector (coupler) at the top rather than use a longer pipe with a push fit end allowung the T section to simply slot in at the top?
Any idea what i can do if a kids toy has been put down one of them and got stuck..its causing toilet to fill up. I have no problems taking toilet off if need to
Grand Master
Any help pls. My soil stack is 10 feet away from my toilet in my bungalow is that ok plus there are no pipes at all attached to my soil stack
nice camera quality
It`s kinda weird to watch regulations of the UK, I`ve been working aboard about 4-5 years including norway/sweden/iceland and mostly everything is different. Why do you guys don`t use same parts everywhere? - You used couple of fit-in elbows and glued the rest. when you could just fit T instead of drilling the pipe.
P.S. It is always fun to watch you! @HOLDTIGHT
Cheers dude! Have no idea really, think it comes down to what companies have a monopoly where....
Is that your gaff Jimbo ?
"I've got my little inch and a half down there" It's not the size of the ship ;-)
Between 7:16 and 7:17 you missed out showing the main bit!! How the big pipe fitted!
Sorry about the drilling noiseee!
plumberparts where's the rest of the installation?! Lol
what's the boss for James??
Shower tray/bath....filming that install next week!
look forward to it bud. used solvent weld for first time this weekend with your help. appreciate the knowledge. 💪
hold tight
work level hand measurement
Cheers bro!
Wrong Jaz old son, you don't have an offset on the wet side of the SVP.
(We have a = relationship) "You make the Mula and she spends IT" 🤣😂🤣😂, If you ever give up the day job, you'll have Great career as stand up comedian
Find this very strange. I have been doing this for 15 years in iceland. We use pvc, pp and skolan dp all with rubber rings. Why do you use pp with rubber ring then at the top you clue it. The you drill a hole instead of useing a T.
Its 2018 stop soldering copper. Use uponor, rehau or copper t with pressfittings
working with a plumber but he's not paying me... I got my tech cert level 2 but need to do my nvq and the way it's going I May have to pay 2000 just to do my nvq 😴 that's if I don't get the job with my local council as I have my interview for a plumbing apprenticeship Thursday coming, wish me luck #holdtight
GOOD LUCK SAM!
plumberparts thanks a lot
Too much glue results in damage to the plastic of the pipe on the INSIDE. This makes the surface rough and is somewhere where the wet wipe will catch and block the sewer! Do not use too much glue, just enough, DON'T 'slop it on'!
Naughty boy no offsets on the wetted length.....unless things have changed since I was serving my time In 1974.
it's so untidy in there right now the rat's go around in helicopters!
I’m sure you could afford a deburring tool the money you’re making
plz hindi language speaking
I can't speak Hindi!
hindi language ma convert kro
Who the fuck would down-vote this?
Probably a hater from Twitter or Facebook...or some other crap social media...ALL HAIL RUclips! :D