My PC has never been so dirty, even after 5 years I only had a very light layer of dust. The right fan arrangement and the right dust protection can save you a lot of work.
hahaha he caught you, if you clean once in December and also in January. then you clean your PC back to back, one month after another. it makes more sense when you clean once every 6 month Jan to July. not back to back.
Yeah that makes no sense, it’s literally like saying you clean it February then March then leave it for 10 months, surely the January clean would be pointless
the cleaning process is satisfying to watch, and the pc specs wise your pc is still a good gaming rig but when I saw those mis match fans and ram modules and the aio fans installed the wrong way aww man your setup needs improvement, but overall good video it is deserve a like.
2:31 I know this video is a year old but I need to point out that you have your fans the wrong way around for the radiator. It seems like they are in a push configuration which is what is causing the dust build up on the radiator. You should really flip them around to make a pull configuration as this will bring clean cold air from outside of the PC into it allowing the radiator to more efficiently cool the water in your AIO. In the current configuration, the water is being cooled by the hot air inside of the case that is also used to cool your graphics card. This can cause cooling issues as your CPU can only be cooled to whatever the air temperature inside your case is as that is the air flowing through the radiator cooling the liquid. On this note you should set you internal cans to be in a push configuration so that you have a "neutral" air pressure within your case allowing air to circulate better. You won't get perfectly neutral air pressure in the case as you would have 3 pulling fans and 1 pushing fan however if the CFM of the pushing fan is equal to that of those of the pulling fans combined you should be fine but ideally you would want multiple fans carrying the load so that air from all over the case is able to get out and not just through one outlet as this can cause stale air to remain in the case which ends up causing the dust build up within. Now since you would be using a 3-in-1 out fan configuration you most likely wont have a natural pressure in the system and will have over pressure in the system which is not bad at all as air will be forced out of the case from other fan ports without the need of a fan there, but it is not the ideal situation. Whatever you do you should not have a a push only, pull only, or a configuration where you have more CFM being pulled out of the case then is able to get in as this causes a negative pressure system in the case and can lead to a issues with you cooling as there is less air in the case (mind you it's a marginal amount but for maximum cooling efficiency you don't want that. Now over pressure is also not great for gpu cooling as with the abundance of air it makes it harder for it to circulate within the case. Now mind you that when it comes to air pressure in the case the difference that it will make on cool potential is slim to none and possible to not see any measurable change at all, HOWEVER, the change in the fans for the radiator will certainly cause a major impact on cooling that you will be able to notice because the water can only get as cold as the air cooling it meaning that if the air in your case is said 98°f the water in your loop can only get as cold as 98° and by association, your CPU will only be able to cool to 98°. Comparing this to using outside air which say is 74°f the water inside the loop can now reach 74° and lead to the CPU being Being able to cool to 74° (theoretically lots of variables are at play when it comes to cooling potential but that's details im not going into). So by making that simple change you add 24° of potential cooling to your CPU for free. Disclaimer the numbers used in this comment are example numbers the actual cooling you may experience may very based on may factors including but not limited to, thermal output of the CPU, age of your AIO or water loop, the type of material used on the heat spreader, ambient air temperature, radiator cooling efficiency, and other factors. Keep in mind that this post lives int he realm of theory and will very if you do this change yourself.
@@Yazevski It depends on the which way you are looking at it. When I said a pull configuration I was looing at it as pulling air from outside the case in and a push configuration as pushing air out. It changes based on the prospective you are looking at
@@Yazevski it's about perspective. You can pull air in or put and push it in or out. The actions are the exact same thing the verbiage is just different.
@@Yazevski buddy I really hate to tell you but a fan pulls in air from the back and pushes it out from the front. If you are look at from the perspective of being inside the case then you air is being pushed in and pulled out, but if you look at it from the outside then air is being pulled in and pushed out. The fact that you come in here saying you are right but cant comprehend the basic when it comes to how fans operate with air is completely baffling to me. You know if you want to get technical about the whole thing then the fans need to be an intake on the AIO and have a fan as the exhaust somewhere on the opposite side of the case it avoid a short circuit . Get off your high horse and go do some actual research on how fans work.
Oh my! Was going to post the same but you beat me too it. Watching quite a few of these PC cleaning videos, I often find myself more concerned about the environments some of these boxes come out of than the actual state of the box itself. The odd thing for me is that the posters do not seem to tie the two together.
@@freshmoney899Its good to clean your room every time when dirty even if dust cant be literally removed as if its not cleaned for a week it might make your pc unplayable ☺️
Even if I did have the b*lls to take a crack at this myself and it went great and my PC was super clean and running better as a result, my whole PC would become dusty again in a month. I tend to stick to the bi-monthly canned air powerwash. if I can jam the dust so far into the components that I can't see it anymore I don't worry about it hahaha. great work showing your equipment the love it deserves after serving you so well.
I mount my gaming pcs on the wall 3ft high away from everything wireless keyboard and mouse removed all screens its been a year now and no dust build up 👍
The dust on the external surfaces could be clean, sometime...a wet rag is enough...no necessary a total disassembling, once every two months you can pass the vacuum cleaner inside the pc, so the most part of the dust gets eliminated... then, the deep cleaning like the one you show in the video is correct, but just once every two years, if you want...
Bro are you from sandakan😂 you brought that thermal grease from digital world maybe i've been working there🎉 but one correction when you cleaning your pc please avoid to wash you aio it will impact your pump just for becareful😅
Watched the whole video just to see how to clean my white custom cables… you took your time to show cleaning of every single part, but missed out only the one thing i was here for 🥲
Don't really think that is often. I'm pretty much the same.. Dust it once or twice every week or two.. Then, at the two month mark. I completely disassemble the pc. And give it a good clean. Along with reapplying thermal paste.
I like your vid. But If this was my cleaning , I wll prefered IPA with microfiber cloth over Wet-paper. IPA is safer , faster vaporizing and leave gunks and dust-staints less than wet-paper.
lol i take apart my pc every couple of months, not the cpu of course, and also not the gpu.... but i clean that thing upside down :d and she shines always
Jeg undrer mig over hvorfor der ikke anvendes trykluft ved rensningen af bundkortet, da den metode er mere effektiv end bare at bruge en pensel samt en støvsuger. Noget der også undrer mig, er processen med kølepasta på både GPU´en og CPU´en. Det ser ud som om kølepastaen er påført i et alt for tykt lag på GPU´en og hvad angår tilførslen af kølepasta på CPU´er er pastaen ikke bredt ordentlig ud, hvilket kan give problemer i form af, at CPU´en bliver for varm, noget der i sidste ende kan medføre at den brænder af.
Your PC is extremely dirty to be the first time in only 2 yrs that u clean it. I've been playing almost everyday since I bought my PC 2019, if im not playing I'm watching youtube and Netflix. My PC hasn't that much dust, I've never cleaned it inside. Guess it's the first time (and probably last) that I see someone using high preassure water cleaning their PC. Often u use high preassured air, never soak it in water. I was very surprised u used the same method to clean the filter...
u missed a lot of time there, why you didn't use a pressure air much more? hold your fans, make a good blow even before you start do disassemble computer ;-)
Термопрокладки на видюхе не поменял, вентиляторы должны продувать радиатор на сквозь, а не как у него, блок питания аэрлкул.... Больно было, но я посмотрел
Bro please help me I don't have any printer encorder all i have is 600ppr 2 phase motor encoder and I'm not getting how to use it in my ffb project please help me
Sorry I'm not pro in this kind of stuff. I did a lot of research on google before making my simulation.. So I'm also not sure how to connect it properly. But I can give you a suggestion for you to start. Try find your encoder's wire terminal. There should be like Phase A, Phase B, VCC, GND... then try connect it to the arduino as follow.. Phase A to pin1/TX , Phase B to pin0/RX , VCC to pin 5v , GND to pin GND.. see if it work
@@PopicasaPOPStuDio okyyy I'll tryy. And i also did some research regarding this so it said that everything is same but i need to just replace the printer encoder with motor encoder and adjust that phase z with a switch others wiring is same . So if I'll face any another problem I'll ask
Solo como observación, debió jugar un rato antes de quitar la refrigeración líquida del procesador, se ve que lo forzó un poco, un paso en falso y a dios procesador, pero lo bueno que no se dañó.
Dear lord man... If your pc is like that you dont want to know how are your lounges... First install filters on every opening of the house, clean all the house as mad and then your pc... I hope the best for ya
My PC has never been so dirty, even after 5 years I only had a very light layer of dust. The right fan arrangement and the right dust protection can save you a lot of work.
The gaming experience was so hardcore….. even his room became messy as a result
Fr
This was sooo satisfying to watch, I do this at least twice a year once in Jan and in Dec, what an awesome job you did looks good as new!
Uh? U know its useless to do it in Jan and dec at least do it in Jan and July or June if ur in holidays
@@obedientseigneursupremes4613 how ? bro it don't really matter you can clean ur pc anytime.
@@reallyryan_ no but he cleans it twice in 2 months and then leaves it for 10 months
hahaha he caught you, if you clean once in December and also in January. then you clean your PC back to back, one month after another. it makes more sense when you clean once every 6 month Jan to July. not back to back.
Yeah that makes no sense, it’s literally like saying you clean it February then March then leave it for 10 months, surely the January clean would be pointless
the cleaning process is satisfying to watch, and the pc specs wise your pc is still a good gaming rig but when I saw those mis match fans and ram modules and the aio fans installed the wrong way aww man your setup needs improvement, but overall good video it is deserve a like.
I just enjoyed the whole video! nice filmed and cutted, very good work, thank you! Please more :D (26.05.2022)
I’m just wondering how it didn’t explode till this day?
Those rams are placed funky
Yeah, I just wondering the right position is 1-3 and 2-4 for each pair.
@@budimahendra877 it depends on the motherboard. Some are topology and others are daisy chained.
Additional 20 FPS right there...lol. Nice job.
writing on paper brings back so many memories when I started building my pc before!
Как же ему повезло что с таким топовым железом его блок питания не рванул
i7 7700 и gtx 1080 не так много и едят, 300w в макс пике буде, когда и проц и видяха на 100%
@@hikidara Так причем много или не много если блок очевидное говно?)
@@clarkmaster2702 если его не нагружать сильно, то с ним ничего и не будет
2:31 I know this video is a year old but I need to point out that you have your fans the wrong way around for the radiator. It seems like they are in a push configuration which is what is causing the dust build up on the radiator. You should really flip them around to make a pull configuration as this will bring clean cold air from outside of the PC into it allowing the radiator to more efficiently cool the water in your AIO. In the current configuration, the water is being cooled by the hot air inside of the case that is also used to cool your graphics card. This can cause cooling issues as your CPU can only be cooled to whatever the air temperature inside your case is as that is the air flowing through the radiator cooling the liquid. On this note you should set you internal cans to be in a push configuration so that you have a "neutral" air pressure within your case allowing air to circulate better. You won't get perfectly neutral air pressure in the case as you would have 3 pulling fans and 1 pushing fan however if the CFM of the pushing fan is equal to that of those of the pulling fans combined you should be fine but ideally you would want multiple fans carrying the load so that air from all over the case is able to get out and not just through one outlet as this can cause stale air to remain in the case which ends up causing the dust build up within. Now since you would be using a 3-in-1 out fan configuration you most likely wont have a natural pressure in the system and will have over pressure in the system which is not bad at all as air will be forced out of the case from other fan ports without the need of a fan there, but it is not the ideal situation. Whatever you do you should not have a a push only, pull only, or a configuration where you have more CFM being pulled out of the case then is able to get in as this causes a negative pressure system in the case and can lead to a issues with you cooling as there is less air in the case (mind you it's a marginal amount but for maximum cooling efficiency you don't want that. Now over pressure is also not great for gpu cooling as with the abundance of air it makes it harder for it to circulate within the case.
Now mind you that when it comes to air pressure in the case the difference that it will make on cool potential is slim to none and possible to not see any measurable change at all, HOWEVER, the change in the fans for the radiator will certainly cause a major impact on cooling that you will be able to notice because the water can only get as cold as the air cooling it meaning that if the air in your case is said 98°f the water in your loop can only get as cold as 98° and by association, your CPU will only be able to cool to 98°. Comparing this to using outside air which say is 74°f the water inside the loop can now reach 74° and lead to the CPU being Being able to cool to 74° (theoretically lots of variables are at play when it comes to cooling potential but that's details im not going into). So by making that simple change you add 24° of potential cooling to your CPU for free.
Disclaimer the numbers used in this comment are example numbers the actual cooling you may experience may very based on may factors including but not limited to, thermal output of the CPU, age of your AIO or water loop, the type of material used on the heat spreader, ambient air temperature, radiator cooling efficiency, and other factors. Keep in mind that this post lives int he realm of theory and will very if you do this change yourself.
Holy Molly dude
@@Yazevski It depends on the which way you are looking at it. When I said a pull configuration I was looing at it as pulling air from outside the case in and a push configuration as pushing air out. It changes based on the prospective you are looking at
@@Yazevski it's about perspective. You can pull air in or put and push it in or out. The actions are the exact same thing the verbiage is just different.
@@Yazevski buddy I really hate to tell you but a fan pulls in air from the back and pushes it out from the front. If you are look at from the perspective of being inside the case then you air is being pushed in and pulled out, but if you look at it from the outside then air is being pulled in and pushed out. The fact that you come in here saying you are right but cant comprehend the basic when it comes to how fans operate with air is completely baffling to me. You know if you want to get technical about the whole thing then the fans need to be an intake on the AIO and have a fan as the exhaust somewhere on the opposite side of the case it avoid a short circuit . Get off your high horse and go do some actual research on how fans work.
You ever thought about writing a book ?
first clean your place and then the pc, running a clean pc in a dump dus not last verry long
Oh my! Was going to post the same but you beat me too it. Watching quite a few of these PC cleaning videos, I often find myself more concerned about the environments some of these boxes come out of than the actual state of the box itself. The odd thing for me is that the posters do not seem to tie the two together.
You can’t get rid of dust
@@freshmoney899he doesn't literally said 'get rid', atleast clean the whole place to minimize or lessen dust accumulation in the syatem.. brain*
@@ZephyrDTV if it’s not going away no point in cleaning 🤓
@@freshmoney899Its good to clean your room every time when dirty even if dust cant be literally removed as if its not cleaned for a week it might make your pc unplayable ☺️
clean but the ram bruh
Even if I did have the b*lls to take a crack at this myself and it went great and my PC was super clean and running better as a result, my whole PC would become dusty again in a month. I tend to stick to the bi-monthly canned air powerwash. if I can jam the dust so far into the components that I can't see it anymore I don't worry about it hahaha. great work showing your equipment the love it deserves after serving you so well.
Yo man, great video but your ram should be in slots 1 and 3 or 2 and 4 no ?
if you want duel channel its slots 2 and 4, if you have 4 sticks it doesnt matter but it should absolutely be the same set of ram
Bro you’re lucky to be alive with that PSU clean. Jesus.
Are you saying the capacitors were still holding a charge?
Bro almost died cleaning that random PSU but cool video otherwise
Exactly how I do it! Same AIO as well. Great Video!
i just notice that your front,top,rear fans are all exhuast . it's a vacuum
I use a mains powered air duster. So powerful and does a fantastic job.
Checkout my new vídeo Revivendo o Teclado Gamer Limpeza Profunda!
ruclips.net/video/YbC0N1H-tjc/видео.html
now this is a deep clean
satisfying
😁
Wonderful job on the cleaning
proud of you kid
Nitrile Gloves is a must for recommend anti static
I mount my gaming pcs on the wall 3ft high away from everything wireless keyboard and mouse removed all screens its been a year now and no dust build up 👍
uish org sabah bha ni haha nice vid.
Next cleaning pc after 10 years😅
Finally, a modern PC in dust
The dust on the external surfaces could be clean, sometime...a wet rag is enough...no necessary a total disassembling, once every two months you can pass the vacuum cleaner inside the pc, so the most part of the dust gets eliminated... then, the deep cleaning like the one you show in the video is correct, but just once every two years, if you want...
Will you come to clean your computer this year too?
Solid setup
Bro are you from sandakan😂 you brought that thermal grease from digital world maybe i've been working there🎉 but one correction when you cleaning your pc please avoid to wash you aio it will impact your pump just for becareful😅
Yes I am, i'll be careful next time 😅
the only point that bothers me is the that AC fan sound and the breathing sound but the video is over all good
Watched the whole video just to see how to clean my white custom cables… you took your time to show cleaning of every single part, but missed out only the one thing i was here for 🥲
Great video I clean my PC every week or two maybe to often but I know there be no dust
Don't really think that is often. I'm pretty much the same.. Dust it once or twice every week or two.. Then, at the two month mark. I completely disassemble the pc. And give it a good clean. Along with reapplying thermal paste.
@@xRipperx619damn where I live there isnt that much dust... Sorry for you guys lol
I clean mine every 4 months and It isnt really dusty
@@maho8204 think its the climate for some people
Awesome work 🙂
I hope, you use antistatic brush bro!
Is your ram same frequency but different brand?
I like your vid. But If this was my cleaning , I wll prefered IPA with microfiber cloth over Wet-paper. IPA is safer , faster vaporizing and leave gunks and dust-staints less than wet-paper.
Bravoo !! Superb !!
Helicopter Helicopter super brother!
🤣
ASMR does not mean no voice or annoying clicking, jumping on bandwagons just for the sake of it is not conducive to a sane existence.
I understand that disassembling and cleaning all the components is done every 1-2-3 years, but the exterior? : /
super video bro
I'm curious as to what brand of hand vacuum do you use.
Great job 👍🏻
lol i take apart my pc every couple of months, not the cpu of course, and also not the gpu.... but i clean that thing upside down :d and she shines always
Jeg undrer mig over hvorfor der ikke anvendes trykluft ved rensningen af bundkortet, da den metode er mere effektiv end bare at bruge en pensel samt en støvsuger.
Noget der også undrer mig, er processen med kølepasta på både GPU´en og CPU´en. Det ser ud som om kølepastaen er påført i et alt for tykt lag på GPU´en og hvad angår tilførslen af kølepasta på CPU´er er pastaen ikke bredt ordentlig ud, hvilket kan give problemer i form af, at CPU´en bliver for varm, noget der i sidste ende kan medføre at den brænder af.
case name?
I'll deep clean my 13 year old pc after this.
Nice vid but how did you put all of does cables in the pc
Your PC is extremely dirty to be the first time in only 2 yrs that u clean it. I've been playing almost everyday since I bought my PC 2019, if im not playing I'm watching youtube and Netflix. My PC hasn't that much dust, I've never cleaned it inside.
Guess it's the first time (and probably last) that I see someone using high preassure water cleaning their PC. Often u use high preassured air, never soak it in water. I was very surprised u used the same method to clean the filter...
i clean my pc once a week 😭😭😭
too often 💀
that vacuum wasnt doing anything bud 🤣
if you lived in london ill give you £150 for that deep clean for my pc
dywan, czysty... meble czyste...
niezle zaaranzowaliscie pokuj pod kontent xD
jak zrobiliscie ta scene z tym kurzem?
This is more disturbing that satisfying lol
Sheeeeeessshhhhh
Hahaha
I was more curious to see your boot up speed.
why not get ride of the old hard dries and get one 4gb ssd drive cause two driffent drives like that can cause speed loading problems
thanks, good to know
ur psu is bomb
u missed a lot of time there, why you didn't use a pressure air much more? hold your fans, make a good blow even before you start do disassemble computer ;-)
So nobody gonna talk about the ram
Show, brother !!
13:35 how does that water cooler work. And where do you add the water
that’s a radiator and a AIO, the liquid already comes inside of the tubes
KCAS💀
the case has no filters that's why
Термопрокладки на видюхе не поменял, вентиляторы должны продувать радиатор на сквозь, а не как у него, блок питания аэрлкул.... Больно было, но я посмотрел
Bro please help me I don't have any printer encorder all i have is 600ppr 2 phase motor encoder and I'm not getting how to use it in my ffb project please help me
Sorry I'm not pro in this kind of stuff. I did a lot of research on google before making my simulation.. So I'm also not sure how to connect it properly. But I can give you a suggestion for you to start. Try find your encoder's wire terminal. There should be like Phase A, Phase B, VCC, GND... then try connect it to the arduino as follow.. Phase A to pin1/TX , Phase B to pin0/RX , VCC to pin 5v , GND to pin GND.. see if it work
@@PopicasaPOPStuDio okyyy I'll tryy.
And i also did some research regarding this so it said that everything is same but i need to just replace the printer encoder with motor encoder and adjust that phase z with a switch others wiring is same .
So if I'll face any another problem I'll ask
@@CrappyDude ok good luck with your project
love it
6 months ..already u need to clean !!!!
I would put some rgb fans in that case.
he needs to get matching ram or better psu first lmao
@@Robo-xk4jm he has a pair of matching ram sticks aslong as it's a matching Pair of 2 it doesn't matter
Bro...that not how you taking out your RAM dude. You should bring the motherboard out first haih disappointed
Ur ram slot, 1,2 not 2,4
Bro vary part of the computer in different 😂
Блок питания бомба
Причём в прямом смысле 😆
Solo como observación, debió jugar un rato antes de quitar la refrigeración líquida del procesador, se ve que lo forzó un poco, un paso en falso y a dios procesador, pero lo bueno que no se dañó.
cat scraching on your mouse pad
This PC wasn't opened in ages.
2 años WTF? imaginate yo que la limpio con todas las cosas cada una semana
Clean the whole house bruh
You can see static at 19:01
my situation every month ...
You need air purifier in your room
Buena limpieza, horrible gabinete
Kinda stupid buying a pc case that doesnt have filters
every 3 or 5 month must the cleaning is good ...
Use dust filters
Pro can you sell a steering wheel pc or not
im sorry im not selling
ada AC nya tapi tetep kotor.
kayak nya lobang udara nya ga ada saringan udara nya.
ato mungkin kebanyakan buka jendela saat nyalain komputer.
Bro be carful !!!!!!!!!!!!!!°°°°°°°°°°!!!!!!!!!!
chyba odkurzacz macie podlaczony w zła strone xD
U all are going on about pc but I'm concerd about the chicken
Dear lord man... If your pc is like that you dont want to know how are your lounges... First install filters on every opening of the house, clean all the house as mad and then your pc... I hope the best for ya
34:09 🐶 🐶 saindo na porrada kakakakakakakakaka
fps 📈
I hose down my motherboard at least once a year
your video video durtion long first dirty pc open check temperture and game fp s and after clean fps and temperture