How to Install HID Headlights with Relay Harness
HTML-код
- Опубликовано: 22 янв 2017
- If the headlights stay on when you turn the car on with just having the ballast connected the the headlight slot. You do not need the relay harness.
Kensun HID Xenon Conversion Kit 6000k - amzn.to/2jK4XeM
Kensun HID Relay Harness - amzn.to/2jK0Dfx
![NoCap - Maliboo [Official Music Video]](http://i.ytimg.com/vi/FUV7E0QyniU/mqdefault.jpg)
THIS IS THE VIDEO I HAVE BEEN WAITING FOR EVERYONE ALWAYS MAKES THESE INSTILLATION LOOK HARD ASF, you explained exactly where the individual pets are suppose to be at the end of instillation
tayvon rose thank you! i looked for a video like this one for hours and i couldn't find one so i made it myself 😂
Bro your video is still super helpful even today thank you 💯
Simple yet, thorough explanation. Thank you.
Thanks bro this was really helpful I had ordered two sets of hids and was tripin out my relay harness should come in tomorrow hopefully it works
Thank you I'm glad I found your video I have installed hids on all my cars for years and just got a 2013 kia optima used and the only video showing HID install has a relay harness and I've been trying to figure out why you have to have that and I'm glad you explained it I did not know that I've always done Hids the regular way I also just got a 2014 Kia Forte and I took my HIds out of my 05 Malibu because it was the same bulb size and they have worked fine without a relay harness
man your video helped me alot. I have been looking for this type of video for the longest. Thanks again for video
hey man i have that issue with my car bt i want to knw after installing the relay will the auto switch for the headlights inside the car work?
Thanks for the Video, this is just what I needed. I wish I would have found this the other day when the car was all apart- cant understand why DSPECK sent me the light housing without any instructions
Can you connect the black wire straight to the negative part of battery?
Thanks man.
Hi sir i intalled hids in my foglamp but my fuse blown. Any idea what to do?
Hi bro great video I want too know ware did u get Decoder Resistance Load Resistor Canbus yellow one
those actually came with the HID kit that I bought
The cable that was going into the ballast where does that go
Thank you.
🤣🤣🤣🤣🤣🤣"I just keep it like this" I'm surprised you didn't screw ballast to expansion tank xD
loved your first vid
I would like to know if you are happy with the kenzan hid and did it ever cause you any kind of problems with dizziness or dizziness when out of the Bells will now I just want to know everybody's advice if you like him you know from 1 to 10 how would you rate them I would like to know also I bought the kensun hid still it's the 6000k 11s for my 2011 Ford Fusion with the projectors that have them already built in Factory and I would just want to know if everybody's happy with it if it's a life span or more you know someone to know.
Alexander24366 I've just installed my kensun 5000k kit today, and both bulbs have a light flicker. Also one side has a hint of blue..
I'm a little disappointed
Bro I had the same thing all I did was cut a hole in the middle and run my wires through the middle of that rubber cover so the cover still cover the hole in the wires ran through the middle of that rubber cover
mine came without resistor and says on balast starts without relay?
you should be good without one then, the resistors get super hot and its annoying to find a place to mount them
this shit confusing as fuck thanks for no help now I can't straight pipe my V19 Civic
Drill a hole in the middle of the dust cover the size of the grommet
Omg cut the dust cover in the middle
Drill?
I watched your video because the black box making clicking sound sound and my light is not working. So you explained all stuff resistor,ballast, wires and when you come to black box you just skipped it so I guess you have no clue what it does and what’s the name for it. So you didn’t explained that good guess you know same as me.
I think that black lil box is called decoder and his job is to avoid error on your dash I could be wrong
but my relay socket dos not match my car socket :(
NVM ,got it! had to use the positive/negative adaptor and use the positive cable from the socket and ground the negative. ah!!!
What a birdsnest! LEDs are much easier.
Much less brighter tho…
Not good to leave your rear cap off your lights
I left mine off for 4 years with no problem… but I’m in a dry area.
I bought a used Mustang and the headlights sucked. I had to tear a bunch of this garbage out. rewire my plugs and put stock lights back in.
Wait... So the load resistors are just chilling, not mounted to anything? And one of em is inside the 'cold air' intake?
So, you installed an intake air heater element! Kinda like BMW does...
The dust cover is there to prevent your headlights for getting all dusty and shit. It's gonna suck balls when you try and detail your car, and keep washing the headlight lense but it just won't get clean. Cause it will get dirty AF on the inside.
Duct tape would be totally fine, barring the car is what you might consider a 'beater'
But I think your car is nice and deserves better.
Cut a hole, stick the harness through the hole, use a number of glues and tapes any of which would work. (use liquid electric tape) and secure the load resistors to something, just not the body or anything plastic.
Yeah now looking back at this, I would of done a lot very different. over the last year i got a project car and learned soooo much. I kinda just wanted to make this video to show how to wire it because i spent like 2 hours trying to figure it out. I got into an accident in May and the body shop uninstalled the lights because the resistor was in the wheel well, which i didn't know, and it burned a hole in there. im happy they uninstalled it before any more damage happened thank you for the comment though and not being a dickhead like majority of youtube comments lol
I give you mad props for the positive attitude and broad perspective, I think my comment could have easily been interpreted different from my intentions.
Sucks about the accident but it's kinda a blessing in disguise. The haters are probably pretty pixie mechanics themselves whether their professional or weekend warrior. It's not like the video was titled, "SEMA convention exhibit, HID kit how to!"
I'm doing a retro fit right now, projectors and HIDs + LEDs.... Almost done with one light, you inspired me to do a video for the other one.
(H1 projector lense with high low switchover using an H7 bulb... 😬 haven't aimed em yet so IDK if it's gonna work well.
yes!! that's awesome, I dont get hurt off of what people say on the internet because theres no point lol but I feel like i did my job if I even helped a few people out. But to actually inspire you! That's such an amazing feeling. Make quality videos that you would watch and people will come!
I appreciate the effort to upload, but you talk too much and your camera shakes like crazy. Honestly I stopped your video at minute 5:00. You are showing exactly the opposite of how it should be done. 1. HID bulbs go into projector not reflector housing, you will glare at other drivers. 2.Those ballasts could have been installed in better positions and hidden below all those plastic stuff. 3. The wiring grommet has to be attached to the rubber cap doing a circular cut and passing the bulb and connectors through, that way it keeps out moisture and dust. 4. Tidy up your installation by using zip ties to order all that messy wiring. You don't want cables hanging there it is dangerous and look awful.
The only thing done right is the use of relay harness, that way you'll preserve your car's lighting wire as the power go directly from battery and ground to the ballast.
For anyone watching this video: don't install HID kits on reflector housings. Don't do what this guy is doing. Be clever.
God damn engine bay lol..shit show
what a horrible installation. 👎👎👎
do you want a cookie or something lmao