I was able to install my wireless charger for my 2013 Yukon XL today. I’m not always great at figuring this out but this video is exactly what is needed for instructions. I paused it a few times to make sure I was following correctly but yes. It worked and it was pretty simple. Thank you Boost Auto Parts for making an easy to follow video for how this needs to go. I’m all up and running great now! Thanks again!
Finally got this for my 2011 Yukon Denali and these instructions were spot on and easy. I saved a step by drilling through the top console plate and I to the inside cover. The connector is snug through a 3/8 opening so I hollowed the holes out a bit. Works perfectly in fast charge mode. Thank you Boost Auto, so simple even a chick can do it!
Great video I have a idea y'all should try that center console latching mechanism breaks a lot you ever thought about swapping it out with a magnet I took a regular cell phone 🧲 holder and it works great
You forgot to tell them that when your Phone reaches 100% the Blue light Flashes to let you know its done charging. Bet you didn't know that one. Lol! 😂
Super helpful video! Just received and installed my charger this week. The connector that attaches to the charger itself looks slightly different than the one in the video, it has a larger catch tab. It does not fit through a 3/8ths drill bit hole. Just a heads up. Consider a larger bit than they suggest here or use a ream after to widen it (I did the latter).
Looks great and I would buy for my 07 LT but am worried about the phone slipping off during harder turns or on rougher roads as the pad now lays almost flush to the pad edges. Anybody experienced such issue and/or found a fix to this?
I have this installed in my 2007 Yukon Denali and both lights are on the orange and the blue nothing happens when I press and hold the button and it does not charge any suggestions
In 6:30 , you put a plug charger is it for the wireless charging ? .... another question, if I turned the car off will it be automatically turning off the wireless charger ? Or I have to press something to turn it off
Hello, That is to simply show you that the cigarette lighter can still be used for any accessories you have. It is not the plug for the charger. The charger is in an idle state when the truck is off. With no phone on the charger it is not charging. With a phone on the charger it will charge the phone.
So If I forget to press the middle button in the wireless charger for almost three seconds, and I turned the truck off, the charger will be totally off ? ( I will not put the phone on the charger when the car is off ) so the car battery will be Fine and I will not have a dead battery right?, sorry for the questions
Not unless you are actively charging with it. The charger in resting state (even with the LED resting light on) draws milliamps and would take months to drain the battery.
We don't currently offer a solution for a 2013 Silverado with jump seat - but we will share the interest with our development team for future consideration.
What does it mean when both the red and blue lights flash together then the red light flashes by it’s self then cycles back to them both together? Charger isn’t working
I have an ‘09...... bc plunging in my phone was such a downer. Lol I’d give it “a thought” if my ride wasn’t already 10 years old. Then again, don’t fix what isn’t broken.
I have a larger phone (galaxy s10 plus with a larger case). When I line the phone up to where you install this wireless charger it does not fit all the way down into the hole as it is too wide, not by much. Does installing this "lift" the hole to become close to flush with the sides of the original hole? In the video it looks like it could be dang close to being flush but I'm not sure.
Did you find a solution? I have an S 10 plus also, with S case and an 07 suburban. Just want to confirm before purchasing and drilling holes in my new truck. Thanks
@@jeffersonjones1168 We do offer a charger for the 2014 1500 with middle jump seat. You can check that out here: ruclips.net/video/DgbeHQJ8Jss/видео.html
How well does this truly work with cases on? I have a Samsung Note 8 an have put several DIY wireless charging solutions in my console but none have worked an if it does I have to take the case off ( Defeats the purpose IMO) But seeing as this is a 10W if I'm gonna spend that kinda money I'd like peace of mind it will work with most cases.
Hi Erika, It is heavily dependent on the thickness and material of the case. This will charge through most cases, however the charging zone is reduced.
Yes, LT's have a slightly different console. If you're not sure, email sales@boostautoparts.com a picture of your console with the mat removed and they can confirm if our charger will work or not.
Now if you would make one that fits under the tray that sits directly under the A/C controls on the Nissan Frontier that would be awesome. Fast Qi charging. Just no drilling or lights needed.
Keep in mind the 2017 Tahoe already has this as an factory option, so you'd be better off just buying an OEM console lid with the wireless charger pad.
It does not work on the LT model of trucks, but might on the SUV's. Please email a picture of your center console to sales@boostautoparts.com and our team can check for you
Link to product: boostautoparts.com/products/charging?Charger&Comment&RUclips
Make one for the nbs
Will this wrk for iphone 6 plus
Installed today! Very pleased does what it should. Charges thru my phone cases
Do you still like it? Does it charge through thicker cases?
I was able to install my wireless charger for my 2013 Yukon XL today. I’m not always great at figuring this out but this video is exactly what is needed for instructions. I paused it a few times to make sure I was following correctly but yes. It worked and it was pretty simple. Thank you Boost Auto Parts for making an easy to follow video for how this needs to go. I’m all up and running great now! Thanks again!
Finally got this for my 2011 Yukon Denali and these instructions were spot on and easy. I saved a step by drilling through the top console plate and I to the inside cover. The connector is snug through a 3/8 opening so I hollowed the holes out a bit. Works perfectly in fast charge mode. Thank you Boost Auto, so simple even a chick can do it!
Appreciate the feedback! Happy to hear this video was helpful.
Got mine today, installed it in like 15min! Simple install and I’m happy with it!
Just installed this charger in my 07 Duramax LTZ, works great. Don't have to mess with plugging my phone in anymore!
Great video I have a idea y'all should try that center console latching mechanism breaks a lot you ever thought about swapping it out with a magnet I took a regular cell phone 🧲 holder and it works great
We will let the development team know your suggestion. Thanks!
@@boostautoparts 👌🏾🤩
I just installed mine and it works great we love it thank you!!
You forgot to tell them that when your Phone reaches 100% the Blue light Flashes to let you know its done charging. Bet you didn't know that one. Lol! 😂
Looser dude!
Great video! very clear nothing left to discuss- complete!
Great video. Excellently explained. Didn’t even leave a screw twist out haha. Thanks for the video!
Glad it helped!
Just installed mine and this video was very helpful 👌
Super helpful video!
Just received and installed my charger this week. The connector that attaches to the charger itself looks slightly different than the one in the video, it has a larger catch tab. It does not fit through a 3/8ths drill bit hole. Just a heads up. Consider a larger bit than they suggest here or use a ream after to widen it (I did the latter).
Great advice - you are correct we have since updated the connector so that hole does need to be slightly bigger.
Just installed today pretty sweet
Great video. Is it water proof? also, do you have an upgrade that fits the iPhone Max PRO12/13?
It is not water proof - it will fit any phone that sits in the factory center console area.
Tanks for the video
Glad we could help!
do you have to turn of the charger every time you get off the truck or can you leave it on every time?
Hello,
You do not have to turn off the charger when you turn off the truck. It will not put any strain on the battery leaving it on.
Can you guys make a video to make this work in a 09-14 Escalade?? It’s the same size!
This will not fit into an 09-14 Escalade even though it looks similar unfortunately.
It's there anything of this sort for a 2018 Fusion or a 14 Camry? Great video by the way.
Sorry, we don't currently have anything for those applications
Looks good. What is the purpose of the two modes?
Some customers do not like a constant blue resting light, so we allow them to turn this off while still leaving the charger powered on.
yall should make these for w 2004 nissan armada
Looks great and I would buy for my 07 LT but am worried about the phone slipping off during harder turns or on rougher roads as the pad now lays almost flush to the pad edges. Anybody experienced such issue and/or found a fix to this?
The rubber mat grips the phone quite well - I'd recommend you call our team at 765-831-2830 to discuss
When are you going to make one for the lower spec trucks with center seat??
We will share the idea with the development team
Is this compatible w/ the 07 ~ 14 escalade??
It is not - sorry!
Will this work on my 2010 yukon denali i want to keep the wood around it
Yes it should
Does it fit iPhone 12 Pro Max with otter box case on? It’s a MagSafe rather slim case that works with wireless charging
Please email support@boostautoparts.com for assistance
Could it be possible for the blue light/red light to in the front instead of rear?.? It looked like it was long enough to stretch
Unfortunately not - the placement of the screw holes that retain the charger are different from front to back.
Does this also work for the 08 Hummer H2? It has the same style console as the Tahoe and Yukon
Send a picture of the console with the rubber mat removed to sales@boostautoparts.com
Same here!!! I want one
WooooW
would it work with thick cases like wallet phone?
The charger works through most cases - although performance decreases based on the thickness of the case.
Would are the maximum dimensions? Would like to get one if a Galaxy Note 20 ultra will fit.
If it will fit inside the middle console insert our charger will work. Feel free to email support@boostautoparts.com for more details.
I have this installed in my 2007 Yukon Denali and both lights are on the orange and the blue nothing happens when I press and hold the button and it does not charge any suggestions
Please give our support team a call at 765-831-2830. They will get this resolved ASAP free of charge under warranty.
Is there one of these for the trucks with the 3 cup holders and jumper seat????
Unfortunately not.
In 6:30 , you put a plug charger is it for the wireless charging ? .... another question, if I turned the car off will it be automatically turning off the wireless charger ? Or I have to press something to turn it off
Hello,
That is to simply show you that the cigarette lighter can still be used for any accessories you have. It is not the plug for the charger.
The charger is in an idle state when the truck is off. With no phone on the charger it is not charging. With a phone on the charger it will charge the phone.
So If I forget to press the middle button in the wireless charger for almost three seconds, and I turned the truck off, the charger will be totally off ? ( I will not put the phone on the charger when the car is off ) so the car battery will be
Fine and I will not have a dead battery right?, sorry for the questions
@@waleedashkananii3690 The charger will be in an idle state. It will not be drawing current for charging but it will still be on.
Thanks, I got it .. I will order it soon ! Thank you
Will it drain battery if now fully powered off??
Not unless you are actively charging with it. The charger in resting state (even with the LED resting light on) draws milliamps and would take months to drain the battery.
Sent a picture already!!! Waiting for an answer, Hummer h2 2008
Does it fit a 2013 chevy silverado but i dont have the full center console i have the middle seat?
We don't currently offer a solution for a 2013 Silverado with jump seat - but we will share the interest with our development team for future consideration.
My 2013 Cadillac Escalade has the same style console will it fit my Escalade?
Email a picture of your console to sales@boostautoparts.com and we can check.
What does it mean when both the red and blue lights flash together then the red light flashes by it’s self then cycles back to them both together? Charger isn’t working
Please reach out to our support team at support@boostautoparts.com or call them at 765-831-2830 for assistance.
I have an ‘09...... bc plunging in my phone was such a downer. Lol
I’d give it “a thought” if my ride wasn’t already 10 years old. Then again, don’t fix what isn’t broken.
'15 chevy 2500HD....manifactured on 2/14...meaning early 15...will this work on my truck? Duramax/Allison truck
Hello,
Unfortunately this will not work on your vehicle.
Do you know why it will not work?
@@white24valve These are designed to fit the 07-14 center console perfectly. The 15+ console has a different shape, so it won't fit properly.
We now offer them for the 2014+ trucks with both the middle jump seat and the full console. Check them out on our site.
I dont have that truck no more..i have a 04 and and 06! Whatca got for those 2 trucks?!
Any chance you will make this for the folding seat option?
We are working on it and it will be released in the forthcoming months.
I am interested as well for ones with the folding seat
@@jaydenmoller9146 Noted!
Ditto!
How about install instructions for a console without rear audio controls?
Please reach out to our support team at support@boostautoparts.com
Would it potentially charge 2 phones if they fit on the charging pad
This will only charge one phone.
Will this charge any kinda phones???
It will charge any phone equipped with QI charging
What about the one for the folding seat option?
We don't currently offer it, but I will let our development team know of your interest!
@@boostautoparts any updates?
WILL IT WORK IF YOUR PHONE HAVE A COVER ON IT ALSO
Yes, depending on the thickness of the case the charging zone may be reduced however.
I have a larger phone (galaxy s10 plus with a larger case). When I line the phone up to where you install this wireless charger it does not fit all the way down into the hole as it is too wide, not by much. Does installing this "lift" the hole to become close to flush with the sides of the original hole? In the video it looks like it could be dang close to being flush but I'm not sure.
It is still a bit sub-flush, so if your phone won't sit level it may not charge adequately.
Couldn't one put something between charger and lid to raise it up to be flush ?
Did you find a solution? I have an S 10 plus also, with S case and an 07 suburban.
Just want to confirm before purchasing and drilling holes in my new truck.
Thanks
Also wondering this I have a iPhone 13 max with a case and does not fit in the cavity
Installed mine says it’s charging but the % isn’t going up! Any suggestions?
It should be, so something isn't right. Give our team a call at 765-831-2830 or email support@boostautoparts.com so we can get this resolved ASAP.
Wish they had this for 2014 Silverado with jump seat
It is in development - stay tuned.
I can’t wait for it 🙏🏻👌🏻
We do now offer it for the 2014 jump seat. You can find that here: ruclips.net/video/DgbeHQJ8Jss/видео.html
Does this not fit the 2014 Silverado LT with jump seat console?
@@boostautoparts I have 1500
@@jeffersonjones1168 We do offer a charger for the 2014 1500 with middle jump seat. You can check that out here: ruclips.net/video/DgbeHQJ8Jss/видео.html
Will this work on a early model 2015 Silverado 1500??
If your truck has a middle jump seat we do offer one here: ruclips.net/video/DgbeHQJ8Jss/видео.html
We do now offer the full console version for the 2014+ vehicles as well. Check it out on our website.
Does this work for iPhone MagSafe?
Our charger will work with phones equipped with MagSafe - however they don't have magnets in them to retain the phone.
@@boostautoparts thank you!
Charges all New phones and Bluetooths. Just set your Bluetooth on it to.
How well does this truly work with cases on? I have a Samsung Note 8 an have put several DIY wireless charging solutions in my console but none have worked an if it does I have to take the case off ( Defeats the purpose IMO) But seeing as this is a 10W if I'm gonna spend that kinda money I'd like peace of mind it will work with most cases.
Hi Erika,
It is heavily dependent on the thickness and material of the case. This will charge through most cases, however the charging zone is reduced.
Does it work a Avalanche console?
Yes
Would this work in my 2012 Avalanche LT, with the center console
There are issues with some LT trims. Please email a picture of your console to sales@boostautoparts.com and our team can check.
Did this work for you?
@@semipro900 I have 2012 Avalanche as well. LT Trim with woodgrain dash. Is your truck the same?
Yes, with the standard radio
@@semipro900 thank ya
Can you use the other connector that’s inside the center console?
Which connector?
@@boostautoparts the other cigarette lighter that’s inside the middle console.
@@michaelmapu572 You can use any 12V outlet connector - they all have the same connector. The outlet will still work even after installing this.
@@boostautoparts Thank you.
You have any link where I can buy this item?
boostautoparts.com/products/charging?Charger&Comment&RUclips
this only works for an LTZ?
Yes, LT's have a slightly different console. If you're not sure, email sales@boostautoparts.com a picture of your console with the mat removed and they can confirm if our charger will work or not.
Do they have one for a 2014 gmc 1500 sierra?
We do have one if your 2014 1500 has a middle jump seat. That is available here: ruclips.net/video/DgbeHQJ8Jss/видео.html
We now also have one for the full console for the 2014+ vehicles. Check them out on our website.
Do you make one to fit the 2014 GMC Sierra SLE yet?
Not yet, sorry!
Boost Auto Parts what about now ?
@@AlexHernandez-zj8zq We do offer one now for 2014 1500 trucks with middle jump seat and center console. Check them out on our site.
Thank you !!
Will this work with the SLE full console ?
Likely not - email a picture of your console with the rubber mat removed to sales@boostautoparts.com and our team can assist
@@boostautoparts I sent the email a couple days ago and haven’t heard anything back
Now if you would make one that fits under the tray that sits directly under the A/C controls on the Nissan Frontier that would be awesome. Fast Qi charging. Just no drilling or lights needed.
Would like to know if you have & option for 2017 Tahoe didn't see one on your website
Not at this time, but I'll let the team know you're interested!
Keep in mind the 2017 Tahoe already has this as an factory option, so you'd be better off just buying an OEM console lid with the wireless charger pad.
@@daveh2612 From what I read the oem pad isn't very good and doesnt work with newer phones.
We do now offer these for 2015-2020 GM SUV's. Check them out on our site.
@@fr8cture We do now offer these for 2015-2020 GM SUV's. Check them out on our site.
Why would these not work on 07-14 Escalades?
The console is slightly different.
@@boostautoparts Oh, ok, and they don't make one for the Escalade?
@@ismaelalcaron6877 Not currently - but I will relay the interest to the development team!
@@boostautoparts I appreciate it! I'm sure there are alot of Gen 3 Escalade owners out there that would be interested! Thanks again!
@@ismaelalcaron6877 No problem!
Do you have one that is compatible with a 2014 Silverado 1500?
Not at this time, but possibly in the future!
I need one too! I really like this install!
@@wildbio2000 If you have a middle jump seat we do now have one available: ruclips.net/video/DgbeHQJ8Jss/видео.html
Can this work on a 2015 silverado?
Unfortunately not, sorry. We are working on adding it in the forthcoming months.
Do you have these available yet for the 2015 Silverado? Thanks
@@HookandLadder1102 We have these available now. Check them out on our site.
We do now offer them for the 2014+ vehicles. Check them out on our website.
I got excited till i realized i have a middle seat instead on a center console on my 2013 Silverado lt🤣🤣
Will this work for my 2013 Cadillac Escalade
Please email a picture of your console to sales@boostautoparts.com so our team can check
Did this work
@@boostautoparts was this compatible
@@Fony_turgeson The charger we currently offer is not compatible with the Escalades.
@@boostautoparts ok thank you. Do you know of any
How soon will you have a kit for 2018 Silverado
Do you have the middle folding seat?
Boost Auto Parts yes I do
@@jessearista4803 this is in development and should be released in the forthcoming months.
@@boostautoparts did this ever make it out of development for the 18 with a folding seat?
@@colet662 The middle jump seat version for a 2018 is now available here: ruclips.net/video/DgbeHQJ8Jss/видео.html
Do you have one for a 2015 Sierra?
Not at this time unfortunately.
These versions are now available. Check them out on our site.
On 2011 2500hd, I have no rear lighter or radio.
Our harness is quite long, you can likely reach an alternative location with it.
Have you developed a system for the 2017 Sierra 60/40 jump seat
Not yet, I'll let our developmeent team know of the interest in this.
These are now available! Check them out on our site.
Does this work for Android ?
Yes
Okay, my 2010 silverado console lid is FLAT , it doesnt have that recess in it, so I guess they dont make one for it.
Unfortunately not at this time
Would this work for 2007 GMC Yukon Denali ?
Yes
Don't waste your money, this is garbage
Will this fit a 2015 GMC sierra Denali with full console?
It will not unfortunately.
Do y’all have any plans to make them for this year model 2015’s are now the only year model that we can’t get wireless charging in.
@@katdaddy4 We can let the team know there is an interest in this but we are not in development at this time.
We do now offer them for the 2014+ vehicles. Check them out on our website.
@@boostautoparts awesome thanks!
Would this work on a 2011 tahoe lt model?
It does not work on the LT model of trucks, but might on the SUV's. Please email a picture of your center console to sales@boostautoparts.com and our team can check for you
@@boostautoparts awesome will do on my lunch break
@@boostautoparts i sent the email!
Does it fit 2014 Escalade?
These do not fit Escalades unfortunately.
Will this work on a 2013 Cadillac Escalade Premium?
Unfortunately it will not.
Is it compatible with the 07 Escalade?
Unfortunately we don't offer Escalade chargers at this time.
Would this work for 2014 Sierra 1500 Denali??
Unfortunately not. I'll let the development team know you're interested in a charger for a 2014 Denali 1500!
Also a 14 ltz
We do now offer them for the 2014+ vehicles. Check them out on our website.
@@traviswarfield3707 We do now offer them for the 2014+ vehicles. Check them out on our website.