No, he said, "Rate that like button below". It's still the wrong verb, but at least it's closer to what he meant. He must have been thinking about "ratings", how many likes versus dislikes.
You're going to have a ton of trouble getting that wheel straight if you tighten the drive side way tight before putting the second tensioner on there.
thnks a lot, very useful. I was trying to figure out if I can install tensioners on my dirt jump bike because I don't like the standards ones inside the frame of my bike.
great video,. have you ever seen tensioners for cruisers? They dont have the pull back option. But need to tension both sides as its motorized. Any help apprecited
You should set a yard stick on you chain at the cranks and align your rear sprocket with the front, even if your tire is slightly offset. Without doing that your chain and sprockets will wear/skip prematurely.
*Was a perfect mix of value **Latest.Bike** and functionality for my 17 year old. Priced better than Mongoose with same build quality of better.*
He really said "rape that like button" man I'm dead
Like out of no where too😂😭
I audibly said "yoooo" at this part 😂
No, he said, "Rate that like button below". It's still the wrong verb, but at least it's closer to what he meant. He must have been thinking about "ratings", how many likes versus dislikes.
You're going to have a ton of trouble getting that wheel straight if you tighten the drive side way tight before putting the second tensioner on there.
Exactly my thought. I never tighten the tensioners until I have the wheel alignment dialed.
Nice vid... Instructions are clear and not 10 minutes long... +1 like
Thank You straight up 2 minute video instead 14 minutes like others on here, Thank You and Happy New Year's 😎👊
Thank you bro. Exactly what I was looking for.
thnks a lot, very useful. I was trying to figure out if I can install tensioners on my dirt jump bike because I don't like the standards ones inside the frame of my bike.
thanks this helped alot
Nice n easy! Thanks.
needed that thanks
Great video 👍
great video,. have you ever seen tensioners for cruisers? They dont have the pull back option. But need to tension both sides as its motorized. Any help apprecited
Thanks very helpfull 🎉
Thankyou, exactly what I needed
+Martin Butler your welcome bro
BikersFix what are these for m8?
14mm
I have a tandem and tensioner are pretty old style. I just did it in morning
do a video on putting redline together.
Thank...
Thanks, now I can get a set for my "Ripper".
ayyyy Same
I got a so cal
I got so cal and big flyer
Nah Haro Annex. Racing
nah, Black market edit1 full custom build for the DJ, and a Fresh built WTP Versus with all eclat aftermarket.
Do you have a link to the chain tensioner in the video?
I want some tensioners on my bmx but just for show is it possible?
I already know how too but jt wanted to watch it cuz I need one sadly smh
You should set a yard stick on you chain at the cranks and align your rear sprocket with the front, even if your tire is slightly offset. Without doing that your chain and sprockets will wear/skip prematurely.
What happens if I don’t have a socket wrench
Chain Tensioner SA
can pegs fit on that same chain tensioner you have
Yes they can
Do i need to loosen the 10 mil evertime im useing the tensioner ? Or can i just adjust from the alan tensioner
what kind of Chain Tensioner that is so I can buy the same one
Its a redline chain tensioner. For 14mm axles
fix Cuba redline..
Can I also put pegs on top of the tensioner?
It depends on how the tensioner is.
Do he say “rape that like button”?
Mine even though the chain is tight it's still popin out
what kind of Chain Ten sooner that is so I can buy
Antono Jackson ,my exact question. Like those Tensioners
How do you know its properly aligned?
By looking at it
thulp
i have the savage nutted tensioner and i have no clue how to fit it. it doesnt seem to be as simple can anyone help?
If the axle doesnt fit into the tensioner you might need a chain tensioner with a bigger hole. Theres some for 3/8 axles and 14mm axles
when i tighten one side my wheel gets off centered
Tighten snug on one side not to much tighten on the other side snug after that then tighten half a crank on one side same for the next and so on
That chain is too tight.
Should be 1 inch slack, that’s closer to quarter inch to half inch.
glooks ian kno wtf i was supposed ta do