Abandoned FC RX7 Engine Build & Install.
HTML-код
- Опубликовано: 5 сен 2024
- The engine that was in the abandoned FC had incredibly low oil pressure, I pulled it and found out the cam bearings were shot, so we're installing the leftover L33 5.3 Aluminum block setup out of my LS Miata! Should make about 100 more whp!
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.co...
FOLLOW ME ON INSTAGRAM
ME - / taylordrifts
ALSO ON TWITTER / taylordrifts
Snapchat: taylorsaysdrift
Background Music by Bonus Points
/ tracks
Let me know what you thought of this video!
20:16 That “lift lowering alarm” mod is spot on. 🔥👌🐓👇🐓👇🐓👇
Hey Taylor, I'm a current medical student and I must say that when I see a video of yours come up on my feed it is the best study break I can think of. The natural sounds of you working on your cars is truly therapeutic!
shout out to the true ripper BENS USED MIATA PARTS blue miata
We need to get this man on WHEELMAN™️!
I'm sure he'll be on there.
Yes definitely
It'll already be in the works
WheelMAN !
I watch a ton of youtubers, including Cleetus, OffTheRanch, LZ and others... But to this day, i'm proud to say, I look forward to Taylor's videos most. Nobody else gives such in depth info about their build and actually teaches and gives tips to their audience. I've watched Taylor for years and i just keep learning new cool stuff every time I watch a new episode.
It’s freaking cool seeing how far you’ve come brother. You look so much happier and you’re literally crushing everything you set out to do. Makes me get off my ass after work and go work on my Z when I watch your videos . Keep it up man you deserve everything you’ve gotten.
No long intros. No unnecessary blabbing. Just builds and content. Gotta love it.
My dad would use a large bottom tap on pilot bushing and 98 times out of a hundred it would come right out after I tried grease puller etc an screwed it up and the freeze plug would never be touched. I miss his life hacks RIP big Jim.
A smart man , I was just gonna say tap the bushing put a bolt in and pull it out . But then again I've been wrenching for 20 years cheers
The video where Taylor traded for the FC was actually the first vid I saw and I've loved every upload since. You have taught me so much and made me a better mechanic, thank you 🤘
Watch his older videos , there's some awesome stuff in there
I'm the kind of person to throw a fit and threaten to burn down my garage everytime I get stuck... Then I'll think of a simple solution a week later and sort it 🤣
Used to be me as well. Now I’m just like okay. What’s the solution there has to be one.
I'm a simple man, when Taylor uploads, i watch the entire damn thing and then smash that like button.
These videos are like mental therapy for me. Soothing, yet educational.
So glad we get to hear the 30 BEEPs from your wrench, wouldn't have slept tonight without that.
Finally a job i can relate to. Needing parts, missing hardware, broken tools, and issues every step of the way
Always love your positive approach to the usual roadblocks you find working on cars! You wouldn't be where you are now without it
I learned the drill trick with the pilot bearing after fighting with mine for 3 days. I ended up calling my dad to try to get him to help and he told me that. Would of NEVER thought of drilling the bearing out.
Uploaded 43 seconds ago? I’ve never clicked a video so fast
Lmao youtube subtitles when u backup the miata “music” “applause”
Ls fc rx7 is a dream build of mine, live this “series”.
It's still absolutely baffling to me how large the engine bay actually is on the FC. Like, it starts out with a tiny motor to begin with but they still gave you just SO MUCH ROOM. I will always love a stock FC. It's just got such simple and beautiful wedge body lines. Unfortunately, most people swap the front bumper or wide body it and the balance is spoiled because of that. You can still make it a beautiful car with aftermarket body kits, but it's a lot of work and expense to get back to the same level of sophisticated beauty that it started out as. A shame yours kinda needs a new front fender.
I always use a scotchbrite pad for gasket surfaces. Hell even on my Jeeps diffs.
Check out LubeLocker gaskets for your diff if your constantly opening them up. Saves a lot of time and they DO NOT LEAK!
Love Taylor Ray videos. He doesn't show too much of the same thing, doesn't speed up the footage too much and just the right amount of yadda yadda.. Excellent editing. 👍
Can’t wait to hear the l33 In her new home
Bread method has worked well for me every time I've done it (all on BMW 6 cyl motors). Always blows my mind.
I just had this pilot bearing issue myself! Multiple different styles of rented pullers, then failing at the grease trick finally put a Dremel to it and got it out in a couple of minutes
That damn rooster was having a good time.
there is always a solution to the problem. something my dad tells and shows me every time we work on some thing.
you are going to be an amazing fabricator
Taylor has to be my favorite RUclipsr
Picked up the Milwaukee M12 right--angle disc/die grinder and holy shit is it an awesome tool. How the hell have I gone without it this long?!? Absolutely recommend getting one if you work on cars/engines. Even for little stuff like cleaning up the heads of bolts on your motor....to cleaning gasket off via Roloc white bristle.
After seeing Taylor use one for so long I had to finally go get one and add to my stable of Milwaukee impacts, ratchets, sawzall, multi tool and leaf blower.
Just an idea.
Find a large tap and the appropriate size bolt for those pilot bushes and make a basic puller, just for those moments
Its a bronze alloy it will tap like butter.
Its junk anyways. May as well make life easier.
Love the content Taylor.
put a 80 gallon fuel tank with pump in the bed of your truck like RicerMiata did so he has E85 for his cars with him. He can also still use his goose neck trailer which is similar to yours.
There you go Taylor. Now you have the block for that turbo c-10 you have wanted to build
*A Taylor Ray video? What a pleasant surprise for a Saturday afternoon!*
Idk if I'm more exited about the new engine or the new windshield honestly
Drink if yer playing the Jibber Jabbering drinking game.
Good bit of jibber jabber. Great chilled out shop with them there chickens squawkin’ in the background. Thanks
Being up here in Michigan, rusty bolts are everywhere. I think I've used nearly every trick in the book. Drill out, burn out, grind out, cut out... But there is always a way.🔩💣🔥
Stuck brass bearing... could tap it for a large bolt and use the bolt head as a pry-point
Put some grease on the crank and then when u heat it up and try to push it on real quick it can help and it would help it would also help when u need to take it off
Should do a dollar shave club promo with Ben. Get him cleaned up and get paid lol
Keep up the great content
Are you buisy ?
Michael Nash huh
@@johnm5625I think that's the first time I've seen that asked in RUclips comment section..
4GsRacing same
@@Zoolah2X how're you pal?
I love how he chooses ads that most of us would actually be interested in
Idk what the hell it is but you just make some great car videos!! You’ve taught me so much
Thank you Taylor.
YES
I used to be that way with repairs where if I couldn't figure it out, I would give up. But then I bought an old bugeye WRX as my daily so now repairs have to get done one way or another cause I gotta get to work lol
You should consider building/buying a gantry crane Taylor, much less of a ballache using a engine hoist, gives you much more headroom and angle to finagle the engine in.
I love how Rowdy your Miata sounds
My cats despise the torque wrench beeping 😾
0:03 the exhaust blows the ground it looks really cool
i would have used the grease method ,it works great,you would be amazed
Isn’t there some sort of thing for the dry sump in the back of the block where the dumbbell is?
he just upgraded the dumbell itself. no reason to change it again
Run e85 for the added protection. It can be a headache to find sometimes but if you have it you have it.
There are only freeze plugs on the forged/dry sump cranks!
I still highly suggest getting a moroso baffled pan for the car, just to have to extra assurance that you ain’t gonna oil starve while drifting!
I was wondering if they made a deep pan that would work for him. I think he's gonna use a accusump with it though like Ben is using.
wheeln 24/7 I assume they do because cleetus runs them on both Leroy and ruby now 👌🏻
How to remove a spigot bearing.
Get a drift wood or brass or other soft metal that is a tight fit into the bearing, fill in behind the bearing with grease or soap then drive the drift into the hole forcing the bearing out.
Another method is to get a bit of wood or bar that just fits then cross drill into the bearing and insert screws to anchor in the bar then attach a slide hammer.
Did you not see the part explaining that there’s a freeze plug there on an ls that you can push out?
@@Taylordrifts Read more of my comment.
I've learned so much from watching this channel, very very very helpful.
Impossible is just a frame of mind. It is mind over matter, if you don't mind, it just don't matter....Git 'er done!
Yes the best part of the day is here!
Invest in an auxiliary fuel tank for the fummins so you can buy 100 or more gallons of e85 at a time and fuel at the track easier etc.
You should get a fuel tank for the bed for the truck with a pump and then you could put e85 in it
That’s a good idea!
A hack saw blade and some tape for a handle can make quick work of the pilot bushing in a pinch.
That was my plan but I didn’t have any small saw blades. Maybe a jig saw would have worked.
@@Taylordrifts You had a carbide burr so you could have modded a blade to fit.
the miata is so wonderfully grumbly...
Just want to say thank you for working in millimeters and not inches. So easy to say 31 mm instead of 1 3/723 inches
Man I had the same problem when I put my balancer on, I heated it up and it stuck halfway on... Had to get a long bolt and some washers to get it on all the way😂
You should totally talk to Cleetus and Kevin to see if you can work with Kevin to help get the Miata and RX smooth and perfect tuning... Just don't let cleeter do it XD
Love the vids taylor, i finished my build with your help. Chur. Please put a hairdryer on the cast 5.3 for the fc when this combo has had enough.
Cant wait till this thing is driving again on the track, paint the fc or wrap it soon please 🙏 car is gonna look so good once its one color
Hopefully this isn't a problem, but if memory serves, when you put in the dry sump in the LS, you put in a new billet dumbbell thing, and I thought you said it changes the way that the oil flows. Does that need to come out of this engine now that it is on a wet sump system?
I believe that's an upgrade he said you should do to ANY LS, regardless.
Good, I was thinking he said that the dumbbell that he put in was longer to redirect the oil flow.
You need a big fuel tank for the Dually for e85 with an electric pump that would be way better then cans I feel like have 1 or 2 cans and you can just fill them up if need be
Please don't ever change what and how you do it on the you tube videos!👌 the only thing I could moan about is that it's not daily videos.. I would like to see you build a 2jz in something?
Should have put an ice cube in the pilot bushing, then used the slide hammer tool.
How do you make powerful engines? Can you help me please? What parts are required?What parts I need to buy and which parts I need to replace to make a powerful engine, I would be glad if you help.
Need to get that rear bash bar powder coated asap, with all that rain you've had it's getting a decent surface rust going on.
@Taylor Ray Why not turbo in that enginr
it souns good on my head
@Taylorray lisle 81780 Carbide Scraper Set those are the ones
Glad to see you grow my friend.. killing it...
Very nice progress. I'm very curious about the sound too! Regards, Nico.
Birdy at Kings Must Rise could definitely use your help 😊
Loving the content all the way from down here in Australia
14:25 the difference between a parts hanger or backyard mechanic and a mechanic right there. ive learned too, sometimes you have to think outside the box a lil.
Jesus. You said you had the 5.2 for over two years. Been watching for so long I didn’t realize it been that long sense you installed that guy
Look a Taylor now! Remember when he looked the FC and was seriously thinking to pass on getting the car.....
your tune is going to be off because of the long tubes. so it'll probably be making another 20-30whp in its new configuration.
*Awesome and insightful stuff about life* "ANYWAY JUST JIBBER JABBERIN"-Taylor Ray constantly
Awesome as always! Thanks!
Phew 456 subscribers.......You are freaking entertaining
Love the the building and then the car on track..
No bullshit
LOVE YOUR VIDEOS! learing so much on different platforms, i have a impreza 2.5rs coupe.
Love the rooster in the background. Love the build...Love the channel. Keep up the great work man.
Bring this car to midpond and party with us!
Man this is awesome you do good work and work your butt off and then drive the wheels off of it lol thats whats up definitely love the channel man
Would love to see this body buttoned up and have it as a secondary smaller drift event vehicle 🤷🏽♂️
ALL OF US: Full respect doing what we can with what we have..
Mr Papadakis: *face palm*
Now that's what I'm talking about 👍 detailed as always, great vid
Just tap the bushing next time and use a bolt to be able to pull that thang outta there
I’d love to see this car go from side heater to end up going down the rabbit hole making it nice.
This thing is gonna blow up big time. I don't want it to but you are asking for it with F Body pan on it even with the baffle
For the love of Christmas put a little grease on those miata hinges brother.
Chickens! Always enjoy the sound of chickens in the background!
dang, i was excited to hear it fire up. awesome job.