Ohh yeah good job on that 360"taylor I hope you fine other RX7's in junk yards or online with interior piece's",it would be nice to see her clean and comfortable like mita but a little bit bigger interior room for yeah🙏🤗
I don't know y this channel isn't at a million subscribers by now. come on everyone like and subscribe share he deserves it he is a killer driver and is so dedicated to this I feel nobody deserves a million more than Taylor......👍
@@wiredkiwis I was surprised he wasn't on drift week he should build that 4 door orange car in to a drift taxi car for next year and I hope he does compete in pro am again he killed it last year...
Agreed Taylor is one of my top 5 automotive personalities. Oddly enough the fear factory was only missing 2 of my top 5 Rutledge Wood and Brent of PFI. Taylor's content is just genuine, and it's funny seeing how excited he gets over things. Authentic gearhead- car nerd.
Those tips in Cleetus McFarlands Freedom Factory video was epic! Not to get all mooshie but it makes me so stoked to see 2 of my favourite RUclipsrs collabing! Much love from Australia! 🇦🇺
Taylor Ray you’re a genuinely nice and honest bloke. I’m so happy for you brother. I know Greg Peters from TheCarPassionChannel. Would love to see you boys collaborate too! Keep doing what you do. And if you ever need anything from the East Coast of Australia just let me know and I’ll organise it for ya.
saw the LS miata in the video today looking forward to seeing some more videos with cleeeetuuss you need to convince him to have drift events fuck the circle track racing
Hey Taylor !! I’m glad you like the wire strippers and I could contribute to the channel. It was really nice to meet you and thanks for the ride along made my trip worth it
Hey. Sounds like a vacuum leak on the FC. don’t only check your manifold gaskets. Also check the hoses and their sources. Maybe even the throttle. However I doubt the throttle myself. But it definitely sounds like the map sensor is reading lower vacuum pressure in the manifold. And adds fuel. (check and clean the sensor as well Just for good measure)
So amazing that you are a part of cletus's Big Adventure looking forward to lots of awesome content I have a lot of memories that track and it feels great that somebody is putting it to good use instead of it just disappearing like so many small tracks do these days
awsome to see you in that Cleatus's new track showing !!!!!! cant wait for your new vids man keep em coming been watching you at teh begining when your miata was red and you first turbo in it :) wich is now a effign beast :) your inspiring man keep it up !!!!!!!!!
Come for the car stuff, stay for the kitties. Also, I totally thought you were going to pour the pibb into the power steering. Also also, Tuck is right, house cats kill millions of birds every year and have even driven some species to extinction! It's not always great to let your cats be outside unsupervised.
Little tip for injector o-rings. Use vaseline to lube them up. It will dissolve with fuel but makes a great lubricant for installs. Great video and killer job drifting in Cleetus's video.
The RX7 is coming together nicely brother. Something about this car makes me love it. The Miata is sweet and very Nice but the FC has something about her that you just wanna go out and rip. And with the Freedom Factory you can enjoy rippin both of them nearby. Awesome content dude, love the other cars and builds to. 🤙💪👍
Forget that Volvo junk, they hardly ever work properly. Use a steering column set up or try to find one from the first and send generation Mercedes A class. It is very compact, it is electro-hydraulic, ant you could whip up a mount for it in no time with your welding skills it is almost like a 3-4 inche cylinder. It has a lid at the top, a 12 volt connector, an two fittings at the bottom to power steering lines to go to the rack. One is high pressure and the other is return. They work excellently. I have used them in the past to remove those stupid ones that mount on LS engines and waste horsepower. I found them at the wrecking yards not far from where I lived. They generally never leak, I have never had one fail. Look it up.
You can spray parts cleaner, carburetor cleaner or something like that on the injectors while it's running and find out exactly where it's leaking. The engine will rev up if you have a leak anywhere when you spray it.
Taylor, check to see if you have leaks in the brake booster. I’ve seen where a leak causes high idle issues that can be super frustrating. Also at your power level why not just throw on a factory rail if the injectors are still slightly leaking? The stock rail will support a ton of power. And just a hope for the future it would be sweet to see a collab with you and moat hoople sloppy turboing the fc (viren might be a good guy to contact about parts) or putting an LSA supercharger on the Miata.
You most likely need to bleed the power steering system itself so take some time and with the pump running just turn from lock to lock and hold at each side at lock and that can possibly fix the problem
Every electric power steering pump I’ve ever worked on uses CHF power steering fluid, ie the green stuff used in most European cars now. So not sure how the atf is affecting it.
Im getting ready to do this on my fc. What where the fittings you ordered that went into the rack? Im reusing the hard line loke you did, but for the other 2 ports?
You wouldn't consider putting a Dr. Gas Boom Tube exhaust on that thing, would you? They sound very loud and very sick. Dump it out the side NASCAR style.
Can’t wait to see you tearing it up at Cleetus’s new race facility it was super cool to see you there for his premiere wait that was you wasn’t it ? Lmfao Don’t get it twisted I’m here anyway but the Freedom Factory skid was off the chizzle lmao 😂
Sick project have you ever thought of trying to use a brake flair to add a flair on the end of that pipe? welding works too. Also sick shreds at the freedom factory :) Can't wait to see more collabs there.
Use brake cleaner to search for facuum leaks. Let it run and just spray arround the manifold amd When is starts climb in rpm you know where it is. Works for me Every time
Yeah I think you've got a flow issue with that steering, probably because it's not running. Looks like you're maxing out the spool valve before it really starts working. So yeah, hopefully more voltage will make it run faster and flow more.
It seemed like the throttle body might not be shutting tight or it has a breather hole when it's not supposed to.. certain ones do certain ones dont I believe. But when you pushed the linkage shut it idled way down.. maybe it's a replacement dorman intake and the seals for everything just arent sealing lol
I find it really weird that Hert's Twerkstallion looks sooo much longer and sleeker than your FC. The body kit added to the ride height makes such a difference.
Your drifting on Cletus’s track was frikin sweet dude!!!Keep it up!!
Your Donut spin was SICK!!
Just watched the ls miata ripping in the freedom factory
Hell Yeah!
One of my favorite moments of an excellent video!
Can't wait for the drift events there! That little track is perfect for it.
Ohh yeah good job on that 360"taylor I hope you fine other RX7's in junk yards or online with interior piece's",it would be nice to see her clean and comfortable like mita but a little bit bigger interior room for yeah🙏🤗
I don't know y this channel isn't at a million subscribers by now. come on everyone like and subscribe share he deserves it he is a killer driver and is so dedicated to this I feel nobody deserves a million more than Taylor......👍
@@wiredkiwis I was surprised he wasn't on drift week he should build that 4 door orange car in to a drift taxi car for next year and I hope he does compete in pro am again he killed it last year...
Too much yada yada yada.
Agreed Taylor is one of my top 5 automotive personalities. Oddly enough the fear factory was only missing 2 of my top 5 Rutledge Wood and Brent of PFI. Taylor's content is just genuine, and it's funny seeing how excited he gets over things. Authentic gearhead- car nerd.
Here because I saw your LS Miata drifting with Cletus.
Oddly enough finding Taylor is what led me to Clet.
Great episode, TR ,
HEY FREEDOM FACTORY
ripping at the end I'm pumped.
Love the cameo in Cleetus’s Vid. Ripping the Miata.
Those tips in Cleetus McFarlands Freedom Factory video was epic! Not to get all mooshie but it makes me so stoked to see 2 of my favourite RUclipsrs collabing! Much love from Australia! 🇦🇺
Cleetus, Cooper, and James are such awesome people. I really enjoy hanging out with them.
Taylor Ray you’re a genuinely nice and honest bloke. I’m so happy for you brother. I know Greg Peters from TheCarPassionChannel. Would love to see you boys collaborate too! Keep doing what you do. And if you ever need anything from the East Coast of Australia just let me know and I’ll organise it for ya.
It was awesome seeing you tearing it up in the freedom factory reveal! On point like always. Hopefully you'll get more time at the factory!
Bro you ripped on Cleetus Freedom Factory vid!
Wish I could auto-like all your videos. They're all great from the fummins to trailer updates to all the cars.
Love all the variety!
You have to talk about ur part in the making in the freedom factory. Seen the 360 with smoke pouring around you. Great job!!
saw the LS miata in the video today looking forward to seeing some more videos with cleeeetuuss you need to convince him to have drift events fuck the circle track racing
Evergreen state elite yes!! Drift events would be alot more interesting and content worthy. Not a big fan of cookie cutter circle track cars
Keep the sandy edits, your interactions with that cat crack me up lol
Who else started to think he was gonna put that Dr Pibb in there.
Big progress Taylor. And omg, Sandy has got an attitude since she became famous :-0 .
MrNicoe36cabrio she doesn’t like sharing the spotlight🤷♀️
Hey Taylor !! I’m glad you like the wire strippers and I could contribute to the channel. It was really nice to meet you and thanks for the ride along made my trip worth it
Freedom Factory full send.. that was awesome Taylor. 👍👍
Hey. Sounds like a vacuum leak on the FC. don’t only check your manifold gaskets. Also check the hoses and their sources. Maybe even the throttle. However I doubt the throttle myself. But it definitely sounds like the map sensor is reading lower vacuum pressure in the manifold. And adds fuel. (check and clean the sensor as well Just for good measure)
Love all the builds! Excited to see the fummins build come together. Awesome little cameo on the freedom factory!
engine internals on table and welding right next to them? might not be the best idea?
Thanks for the update on Sandy & Tuck. Nice to see they are getting along so well. ;-)
Taylor.... The LS Miata made the news Hell Yeah Brother!!!!!
So amazing that you are a part of cletus's Big Adventure looking forward to lots of awesome content I have a lot of memories that track and it feels great that somebody is putting it to good use instead of it just disappearing like so many small tracks do these days
Killer 360s man, I loved seeing you in the cleetus video
awsome to see you in that Cleatus's new track showing !!!!!! cant wait for your new vids man keep em coming been watching you at teh begining when your miata was red and you first turbo in it :) wich is now a effign beast :) your inspiring man keep it up !!!!!!!!!
Miata a little ripper doing the ole 360s on cleetus’ new track rock on brother🤘🤘
I am really looking forward to seeing your day at Cleetus' race track, it must have been so much fun.
When are you going to show the rest of the FREEDOM FACTORY lol
THAT FREEDOM FACTORY 360 WAS SIICCKKKK
Taylor is a such a day yelling at his kids to “cut it out” 😂
Get enough of you guys out there rippin' the Freedom-Factory track and he wont have to Kick weeds! Nice 360's Taylor...
dude your channel is so fucking underrated you make concepts so easy to understand
Come for the car stuff, stay for the kitties. Also, I totally thought you were going to pour the pibb into the power steering. Also also, Tuck is right, house cats kill millions of birds every year and have even driven some species to extinction! It's not always great to let your cats be outside unsupervised.
It's funny I decided to watch this before the Cleetus video, but I had seen the screen grab of it. Very cool stuff.
Super stoked you decided to keep the FC around. Love that chassis!
The volvo pump conversion is probably well known, but new to me. Lots of ideas now for future projects, thanks.
dude sick vid and your drifting also looked mad at the new freedom factory good job
Good thing I'm doing this with mine. Thanks for info I'll really need here in the next few weeks
I freakin knew it was you when I saw the LS Miata in Cleetus' awesome intro video earlier. Awesome
Little tip for injector o-rings. Use vaseline to lube them up. It will dissolve with fuel but makes a great lubricant for installs. Great video and killer job drifting in Cleetus's video.
Thanks bro this came in handy really didn’t wanna run a Gm pump
Plus I have no space ... I would have never thought of this
Hey sandy and Tuck ! Good man Taylor, loving the rx7 content !
Glad to see you continuing to make progress on this thing. I know you hate it, but its my favorite car you have.
ok not going to lie .. love your cats ..lol Sandy is cool and TUCK is cool looking ... ok back to cars..
Curt Pratt they’re the best kitties ever
Give sandy some love! Tuck is so shy!
It’s an ls3 intake with ls1 injectors? If so you need bigger O rings for the injectors
I like how you always do everything yourself no need to look for clout or attention you just do you 👍
Glad to see another video on this car, it's my favorite!
The RX7 is coming together nicely brother. Something about this car makes me love it. The Miata is sweet and very Nice but the FC has something about her that you just wanna go out and rip. And with the Freedom Factory you can enjoy rippin both of them nearby. Awesome content dude, love the other cars and builds to. 🤙💪👍
Tearing up the track with style. Great work👏👏👍👍
You need to build a burnout car for his burnout contests! The 360 you did in Cleetus' video was sick!
Stoked to see you back on this car for a bit!
I saw the miata tearing it up at the freedom factory, that's gonna be sick dude!
Freedom factory looks sick at the end
I like what you’ve been doing with the sound on these videos. 👌🏻
Any plans on making a video with the Hayabusa ?
Who’s been here since before the Freedom Factory?
Me.
Forget that Volvo junk, they hardly ever work properly. Use a steering column set up or try to find one from the first and send generation Mercedes A class. It is very compact, it is electro-hydraulic, ant you could whip up a mount for it in no time with your welding skills it is almost like a 3-4 inche cylinder. It has a lid at the top, a 12 volt connector, an two fittings at the bottom to power steering lines to go to the rack. One is high pressure and the other is return. They work excellently. I have used them in the past to remove those stupid ones that mount on LS engines and waste horsepower. I found them at the wrecking yards not far from where I lived. They generally never leak, I have never had one fail. Look it up.
Saw you at Cleetus new track video so dam sick you did the 360 drift omg 🔥🔥🔥
Sick 360 in the yata on the freedom factory video
You can spray parts cleaner, carburetor cleaner or something like that on the injectors while it's running and find out exactly where it's leaking. The engine will rev up if you have a leak anywhere when you spray it.
Taylor, check to see if you have leaks in the brake booster. I’ve seen where a leak causes high idle issues that can be super frustrating. Also at your power level why not just throw on a factory rail if the injectors are still slightly leaking? The stock rail will support a ton of power. And just a hope for the future it would be sweet to see a collab with you and moat hoople sloppy turboing the fc (viren might be a good guy to contact about parts) or putting an LSA supercharger on the Miata.
We all know what that closing shot is from now. That was awesome.
Really liking this build - hoping it turns out great underdog and gives the Miata a run for king of the garage
I dig the FC. I always loved that body style.
It's not as cool as the Miata but, still....
Oh, and great show at the Freedom Factory!!!
You were ripping in that freedom factory video.... Looking forward to seeing this beast get unleashed
Love the heavy breathing
Your a G Taylor! Keep it up my guy!
great vid as always was cool seeing you ripping the Miata at freedom factory, new test site perhaps.
I bought that same pump. Haven't gotten to that point yet. Curious to see if this works.
Same, I bought a volvo pump for my s13 like a year and a half ago that I haven't gotten around to setting up yet
Putting it in a Fox body. Weird thing is, even though it came out of a Volvo, it has FoMoCo stamped on the side.
seen the miata in the freedom factory video from cleetus dope bro
Hope you had fun helping break in the freedom factory
use a flaring tool on the steal line so the clamp on the rubber hose won't slip off. (instead of welding a bead)
You most likely need to bleed the power steering system itself so take some time and with the pump running just turn from lock to lock and hold at each side at lock and that can possibly fix the problem
Every electric power steering pump I’ve ever worked on uses CHF power steering fluid, ie the green stuff used in most European cars now. So not sure how the atf is affecting it.
Taylor you should build a few heat block off shields for the power steering pump and master cylinder
helll yeah brother the ls miata in the freedom factory
When you move the throttle it goes back to a low idle... it should be something throttle plate related I’d think.
Is this old and the top secret thing drifting at the freedom factory? It was a sweet video and I was stoked to see you and Mike there too!
Im getting ready to do this on my fc. What where the fittings you ordered that went into the rack? Im reusing the hard line loke you did, but for the other 2 ports?
If it has a intake or vacuum leak just spray starting fluid around it and it should idle up when you hit the leak. If that is the problem
You need CHF fluid for that pump dude.
Why are you running a T in the low pressure line?
You wouldn't consider putting a Dr. Gas Boom Tube exhaust on that thing, would you?
They sound very loud and very sick. Dump it out the side NASCAR style.
You made the news! The new covered the freedom factory and they showed your 360.
Can’t wait to see you tearing it up at Cleetus’s new race facility it was super cool to see you there for his premiere wait that was you wasn’t it ? Lmfao
Don’t get it twisted I’m here anyway but the Freedom Factory skid was off the chizzle lmao 😂
Sick project have you ever thought of trying to use a brake flair to add a flair on the end of that pipe? welding works too. Also sick shreds at the freedom factory :) Can't wait to see more collabs there.
Cleetus was right. It was a perfect shot ;)
This car is fucking dope, good content Taylor
Why not use flaring tool like use on brake line
littlebitofinsanity probably the thickness of the line
Use brake cleaner to search for facuum leaks. Let it run and just spray arround the manifold amd When is starts climb in rpm you know where it is. Works for me Every time
Yeah I think you've got a flow issue with that steering, probably because it's not running. Looks like you're maxing out the spool valve before it really starts working. So yeah, hopefully more voltage will make it run faster and flow more.
It seemed like the throttle body might not be shutting tight or it has a breather hole when it's not supposed to.. certain ones do certain ones dont I believe. But when you pushed the linkage shut it idled way down.. maybe it's a replacement dorman intake and the seals for everything just arent sealing lol
The o2 sensors you have are for post cat connections. That's why they have Male connectors.
U need to let me fix up that pool before summer bro!!
Nicely done sir 👍
I find it really weird that Hert's Twerkstallion looks sooo much longer and sleeker than your FC. The body kit added to the ride height makes such a difference.
Ripping at the freedom factory
Great work Taylor🤟
Hey Taylor... What does Tupperware, a Walrus and an LS fuel rail have in common? They all like a tight seal.
Holden astra electric power steering pump in Australia is a bit more compact if you want to switch it up