SEM makes a matte black trim spray paint that can give you that consistency on your black plastics that you're shootin' for. It holds up in the hot engine area just fine too. SEM makes it and its called trim black. I have an older Ram 3500 that looks new as far as the plastic goes. Their plastic doesn't stay looking new for long, but this stuff does the trick
I personally would paint valve covers gloss black with purple agents (much like it is now). But paint the intake manifold purple to match. Then paint that silver aluminum life in the front black
Maybe consider getting purple plasti dip, or maybe just normal spray paint, it's not really a part that gets a lot of wear. Love your changes to your scat pack, definitely my favorite one I've seen. I honestly hate the new Chargers, but the more I see yours the more it grows on me.
purple brake calipers, also purple out the green screws on the intake, maybe do something with the coolant or the fill so that the color is purple. The car definitely looks great tho
Start the set screws into the caps before putting the caps on would make it much easier to start the screw. Of course don't turn the screw so far that it would hamper the installation of the caps.
Looks good, I would say gloss black with the purple accents that would look good. Although the purple with black wouldn't look bad but I'm afraid it would too much purple.
I'd say go with black and purple. I feel like there would be to much purple under the hood if all of the valve cover is purple. I feel if it is black with purple accents it has nice contrast.
I drive a redline red scat pack and I got to say the mods are looking good! What you should do is make as much purple as you can, that way when you open the hood you get a better wow effect on people. Just my thoughts. Good luck and have fun.
Riley: you might want to get that oil cap set screw installed. Remove the cap, and work it in there. I thought the same thing as you - it's on there tight, and isn't going anywhere. It will loosen up. I opened my hood one day, and mine was gone! Bounced right off and out of the engine bay, I guess. :(
black with the purple is the best brother .. otherwise there's too much purple and you run the risk of having too many SHADES of purple in that engine bay :) you're a brave man though my ocd wouldn't allow me to make a balsy decision to buy the colored BT accents lol I ordered the clear satin to be safe haha looks great though !!
Notification squad! 🤘🏼 I'm thinking of ordering a catch can for my hemi from them but I'm still kinda on the fence. A lot of people say that the waiting time is kinda long. Love the vids Riley, keep up the great work!
I have all of their caps on my GTO from the limited production run they did for my car. Although they are nice pieces, I wish they would have actually made billet caps, not cap covers (even if that made them more expensive). Granted ive had mine for a few years with no issues but still.
Nice Billet pieces. I'm currently waiting on my Billet Technologies Catch Can to show up in the mail. You're right, a definite must have. Just wanted to slightly correct you on the reference IG pic and let you know that my accent color is actually Bright Silver Metallic and not white. I say you go all purple. No such thing as too much purple :) If you want to try something different and don't mind spending the cash, my original idea was to still have the purple as the main color and to Green Envy for the accents. Later found out its a 3 stage paint and would cost another $70 for the Green Envy so I just went with the Bright Silver Metallic. I still may do some Green Envy accents down the road. Keep up the good work man!
My bad man!! I thought it was white but now it makes sense they're silver! Either way it looks great! :) The green would for sure be cool but I'm trying to stick to black/purple with a little bit of red (brembos, badges) so maybe even red would look okay on them. Probably will play it safe though and continue the black/purple theme. Thanks!
All good! You could even do the accents in Gold to play off of your catch can fittings! Sorry, i'm partial to Gold having had Subaru's before. Anyway you cut it you can't go wrong. Excited to see what you end up choosing. Cheers!
RILEY, THIS LOOKS GREAT, I HAVE A 2016 SRT CHALLENGER IN PLUM CRAZY PURPLE WITH THE BILLET TECHNOLOGY'S UNDER HOOD KIT IN PURPLE. I AM STILL NOT SURE ABOUT THE ENGIN COVERS EATHER. I AM LOOKING FORWARD TO WHAT YOU FIGURE OUT.
Looks nice. Not so hot on the "Cold Air" Intake mod. The stock air box with a K&N Air Filter is probably AT LEAST as effective as any aftermarket combination you can buy and offers MUCH better protection against water intrusion from the hood scoop. Not so the catch can. Required stuff for the 6.4. Otherwise, all good. Love me some Plum Crazy!
Leave the Valve Cover Covers alone the way they are (purple on flat black). The Shock Tower covers might look good in purple, but I doubt I'd mess with them the way they are.
Very nice. Now.....save your money on that hydro dipping of those valve covers, they look good as they are now. Take that saved cash and get a Moroso coolant tank, some Speedlogix coolant tank braided lines and purple fittings, BT purple hood strut covers, BT purple Devo strut bolt covers and a purple water neck housing. Then as a finisher; a visit to West Coast Fasteners website for some of their killer burnt titanium engine bolts (with purple washers) and maybe some black ground spikes.
I would do the satin black like what you are thinking of doing and the shock tower caps do them the same satin black. Keep up the great vids. Mopar or no car!
If you didn't fix your remote start yet, did you check the hood switch by your strut tower brace? The brace install could've messed it up. Just a thought. Car looks great!
I think it looks fine at this point. a purple light maybe... how about the radiator reservoir... black out maybe? dam dude... what else can you do? ps... I just finished paying mine... 5.7.. will be going billet dress up soon... my car is white though... grrr... choices choices...
+RP Productions I did too on my fiances durango. The braided lines wouldn't go on all the way. I tried everything and no luck. So I need to find another way. Love your car man, I'm hoping to get one soon.
Looks good! I have a met. granite 15 model and will be doing the same stuff. They don't have a matching color kit but I'll do something. I'm thinking satin to match the Drake strut Brace. Thanks for the Video and enjoy your ride. I love mine!
Hey man, where did you get the custom Oil Dipstick? (I used to go by OklahomaD, I'm an OG) (You also convinced me to get my mid-muffler delete (results on my channel.)
Hey Riley I think you should get both.. Try them both out for 6 months see which you like better but I say Purple with Black, why not be different it would look tight.. @rp_productions
Also I've asked you this question before but I've done a muffler delete on my Camaro ls1 it sounds loud but will the long tube headers make it a bit louder or a lot louder? I know I've asked you this question but I wanted to ask someone with experience like you thanks.
Man I think it looks perfect the way it is right now. The balance of the purple and black is spot on.
Black with purple for sure. And keep the caps black. The purple and Black looks good.
Just picked up a Scat yesterday. Your videos and reviews real helped me make the choice. Can't wait to start making some personal changes.
Congrats on the car!! You're going to love it!
SEM makes a matte black trim spray paint that can give you that consistency on your black plastics that you're shootin' for. It holds up in the hot engine area just fine too. SEM makes it and its called trim black. I have an older Ram 3500 that looks new as far as the plastic goes. Their plastic doesn't stay looking new for long, but this stuff does the trick
I personally would paint valve covers gloss black with purple agents (much like it is now). But paint the intake manifold purple to match. Then paint that silver aluminum life in the front black
Maybe consider getting purple plasti dip, or maybe just normal spray paint, it's not really a part that gets a lot of wear.
Love your changes to your scat pack, definitely my favorite one I've seen. I honestly hate the new Chargers, but the more I see yours the more it grows on me.
Hey Riley, I love all the mods your installing. The Purple and black is awesome! I can't wait to get mine.
purple brake calipers, also purple out the green screws on the intake, maybe do something with the coolant or the fill so that the color is purple. The car definitely looks great tho
Start the set screws into the caps before putting the caps on would make it much easier to start the screw. Of course don't turn the screw so far that it would hamper the installation of the caps.
yes, I highly recommend a catch can. I have the same in polished instead of purple. Alittle preventive maintenance.
stock valve covers with the purple highlights you have on it looks fine as-is.
I agree with you 100%. The dudes who complain that you're not doing any performance mods are the same dudes who daily drive their mom's PT cruiser.
Looks good, I would say gloss black with the purple accents that would look good. Although the purple with black wouldn't look bad but I'm afraid it would too much purple.
I'd say go with black and purple. I feel like there would be to much purple under the hood if all of the valve cover is purple. I feel if it is black with purple accents it has nice contrast.
I drive a redline red scat pack and I got to say the mods are looking good! What you should do is make as much purple as you can, that way when you open the hood you get a better wow effect on people. Just my thoughts. Good luck and have fun.
For the battery positive terminal you can buy plum crazy touch up pair is us that to paint it purple
purple with black accents looks bad ass man👍
Today we're playing Dress Up! hahaha nice Riley!
you could plasti dip the positive battery terminal cover, your whole engine bay looks great!
Riley: you might want to get that oil cap set screw installed. Remove the cap, and work it in there. I thought the same thing as you - it's on there tight, and isn't going anywhere. It will loosen up. I opened my hood one day, and mine was gone! Bounced right off and out of the engine bay, I guess. :(
Oh wow! I'll go secure it, thanks for the heads up!
black with the purple is the best brother .. otherwise there's too much purple and you run the risk of having too many SHADES of purple in that engine bay :) you're a brave man though my ocd wouldn't allow me to make a balsy decision to buy the colored BT accents lol I ordered the clear satin to be safe haha looks great though !!
Remove the oil filler cap first to put the cover on. The set screw is important.
purple and black..
love what your doing.becuz of you ive been able to find these products way easie
The caps leave them black and the red letters make them black ! 👍🏼 and do not paint the middle to purple it might be a little to much
There is a set screw on some of them, it will prevent the rattling noise
With the valve covers I think the satin black with purple accents will do just fine. It will break the purple up just fine...
I like the purple with black accents on that engine cover.
Purple engine Cover with black. Every other Scatpack would have a black base. set yours out by making it purple
Notification squad! 🤘🏼 I'm thinking of ordering a catch can for my hemi from them but I'm still kinda on the fence. A lot of people say that the waiting time is kinda long. Love the vids Riley, keep up the great work!
Yup...ordered a catch can during there 4th of July sale and its still processing my scatpack will probably be here before the can does
yeah i just got mine a couple weeks ago. took about 6-7 weeks but its worth it
Speedlogix sell 3 types of catch cans for the Hemi engine and supposed to be a lot faster than BT.
+rjburston yeah but i got the BT because of the color options and quality
I wouldn't remove the cover for the positive terminal I would order the paint for repairing your car then try to paint it
black with purple accents for sure, oh and use plum purple touch up paint on your strut bar
Purple with the black is my vote
I have all of their caps on my GTO from the limited production run they did for my car. Although they are nice pieces, I wish they would have actually made billet caps, not cap covers (even if that made them more expensive). Granted ive had mine for a few years with no issues but still.
Nice Billet pieces. I'm currently waiting on my Billet Technologies Catch Can to show up in the mail. You're right, a definite must have.
Just wanted to slightly correct you on the reference IG pic and let you know that my accent color is actually Bright Silver Metallic and not white. I say you go all purple. No such thing as too much purple :) If you want to try something different and don't mind spending the cash, my original idea was to still have the purple as the main color and to Green Envy for the accents. Later found out its a 3 stage paint and would cost another $70 for the Green Envy so I just went with the Bright Silver Metallic. I still may do some Green Envy accents down the road.
Keep up the good work man!
My bad man!! I thought it was white but now it makes sense they're silver! Either way it looks great! :) The green would for sure be cool but I'm trying to stick to black/purple with a little bit of red (brembos, badges) so maybe even red would look okay on them. Probably will play it safe though and continue the black/purple theme. Thanks!
All good! You could even do the accents in Gold to play off of your catch can fittings! Sorry, i'm partial to Gold having had Subaru's before.
Anyway you cut it you can't go wrong. Excited to see what you end up choosing.
Cheers!
I like the Plumb crazy purple and satin black👍
Love all your bling!! Need the pressure for full throttle engine jumps and off it will come!!😎👍
Gotta love Billet Technologies, super great company & people
All purple with black will be great
RILEY, THIS LOOKS GREAT, I HAVE A 2016 SRT CHALLENGER IN PLUM CRAZY PURPLE WITH THE BILLET TECHNOLOGY'S UNDER HOOD KIT IN PURPLE. I AM STILL NOT SURE ABOUT THE ENGIN COVERS EATHER. I AM LOOKING FORWARD TO WHAT YOU FIGURE OUT.
In regards to your question, go BLACK with Purple accents. You don't want to drown your engine bay with purple.
Looks pretty good as is now.
Looks nice. Not so hot on the "Cold Air" Intake mod. The stock air box with a K&N Air Filter is probably AT LEAST as effective as any aftermarket combination you can buy and offers MUCH better protection against water intrusion from the hood scoop.
Not so the catch can. Required stuff for the 6.4. Otherwise, all good. Love me some Plum Crazy!
Leave the Valve Cover Covers alone the way they are (purple on flat black). The Shock Tower covers might look good in purple, but I doubt I'd mess with them the way they are.
How about plum hood lifts (shocks)? I op for the plum with black accents.
Too Cool but I think the new parts are a little bit darker than the others ! But still Too Cool !!
Riley you should do the black with purple accents and the intake manifold a glossy purple. 🙂
Very nice. Now.....save your money on that hydro dipping of those valve covers, they look good as they are now. Take that saved cash and get a Moroso coolant tank, some Speedlogix coolant tank braided lines and purple fittings, BT purple hood strut covers, BT purple Devo strut bolt covers and a purple water neck housing. Then as a finisher; a visit to West Coast Fasteners website for some of their killer burnt titanium engine bolts (with purple washers) and maybe some black ground spikes.
don't forget that red fuse cover on the passenger side
I would do the satin black like what you are thinking of doing and the shock tower caps do them the same satin black. Keep up the great vids. Mopar or no car!
Leave strut tower things black and do the powered by srt things black with the purple
Purple with black accents
Have you thought about a painted Coolant Tank? I know a guy that doe them and he can do it in Plum Crazy.
+RP Productions Def go with Satin Black with Purple accents.... the purple would definitely over saturate lol just my 2 cents
That is how to make your performance car your own. Dare to be different.
Duuuuuuude this looks super nice!!
If you didn't fix your remote start yet, did you check the hood switch by your strut tower brace? The brace install could've messed it up. Just a thought. Car looks great!
On the Challenger, the switch is on the passenger side under the plastic cowl near the windshield. Not sure if it's the same on chargers.
Sadly the Chargers don't have that switch, only the challengers! I checked and compared it to my buddys challenger :\
I think it looks fine at this point. a purple light maybe... how about the radiator reservoir... black out maybe?
dam dude... what else can you do?
ps... I just finished paying mine... 5.7.. will be going billet dress up soon... my car is white though... grrr... choices choices...
I had so much trouble with their braided hose, I had to return it. But the catch can is awesome.
What problems did the hoses give you?
+RP Productions I did too on my fiances durango. The braided lines wouldn't go on all the way. I tried everything and no luck. So I need to find another way. Love your car man, I'm hoping to get one soon.
+RP Productions hose diameter was to small, I added soap, oil, and wouldn't slip in.
Ya my hose was a very tight fit. They told me to just use soap and it would go on
Looks good! I have a met. granite 15 model and will be doing the same stuff. They don't have a matching color kit but I'll do something. I'm thinking satin to match the Drake strut Brace. Thanks for the Video and enjoy your ride. I love mine!
That intake tube really makes me feel weird when I look at it....
Nice!..When you have a minute look up a guy named "Ron Couch" on FB, he sells every color of overflow reservoir. He has PCP one's too
Looking good bro really creative..😊
Hey man, where did you get the custom Oil Dipstick? (I used to go by OklahomaD, I'm an OG) (You also convinced me to get my mid-muffler delete (results on my channel.)
looks great and leave it like that do change any thing else
I think its enough purple.. looks cool as it is :)
Black with purple accents 😍
you should definitely have it painted black with purple details
purple LED lighting! do it!
great video man! I would keep the caps on both sides black. dnt want too much purple. it looks great tho!!
A video idea for you could you make a insurance costs and how much you pay to help perspective buyers out
On the way! :)
You should try volo vp12 performance tunning obd chip it helps it knocking off a few secs... And better aceleration off the line
This is an old video but how long did you wait to get the Billit kit. I just ordered one for my Scat Challenger
Purple metallic looks awesome I'd go for that
IMO leave the half covers alone & paint the intake purple. Good luck
Hello do u have a clip showing how u put the dip stick cover on I can’t seem to remove my old piece off.
Purple with black. The black with purple it's to basic. Purple will give it a much cleaner better look.
Can you tell me who makes that cover next to the radiator reservoir right in front of the fuse box cover thanks 🙏
Love the vids hemi life!!
These cars are fast enough. They don't need performance mods.
Looks great man!!!
Hey Riley I think you should get both.. Try them both out for 6 months see which you like better but I say Purple with Black, why not be different it would look tight.. @rp_productions
It's KEVIN.... from Home Alone
Where can I find that stick on the engine bay cover
black half covers with purple accents !!!
I like the stock look of the valve covers! Don't paint them!! And leave the covers for the shocks black.
are you gonna be at cars & coffee on Saturday?
yes we will
Looks great brother!
Black with the purple
your car is fire 🔥🔥🔥🔥
black with the purple
You should add a scoop to your engine
Also I've asked you this question before but I've done a muffler delete on my Camaro ls1 it sounds loud but will the long tube headers make it a bit louder or a lot louder? I know I've asked you this question but I wanted to ask someone with experience like you thanks.
Long Tubes will make it quite a bit louder.
how is all this stuff holding up with all the heat?
My oil cap cover came with tape. Kinda odd.
Black and Purple
I know you don't have the scat pack anymore but what do you call the cover next to the wiper resevoir
Paul Martinez ABS cover
Black with purple
Leave the engine covers alone and change the caps to purple.
Hey man, I like the black with
Change out those strut covers RP those black plastic covers are so cheap!!
Black with purple accents
Satin Black and purple caps
Black with purple . Did that cold air intake come stock?
The CAI is aftermarket from R2C.
Hey Riley, when can we expect the purple color matched wheels? :P Loving these videos man!
Why purple wheels? They should stay black.