I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed
Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...
now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)
don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)
I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."
@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.
@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer. Printing something actually useful?✋🏻 Printing something that I probably shouldn't be printing? 👉🏻
There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.
Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.
Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.
Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.
Good enough is GOOD ENOUGH!!! Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?
The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!
She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.
I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack. Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!
This would make an amazing lawn ornament / bird bath. It's self refilling and can be easily cleaned by flushing. The birds can perch on the arm rests and even get snacks from the cup holder.
How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol
I haven’t checked on you channel in almost a year so I’m now watching all videos from newest to oldest and every time I see a video title I die laughing, good job
another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare
I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor. I'm so glad I found you on the Maker Secret Santa. Have a happy new year!
At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.
Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.
For an actual toilet race, Check out the "dunny derby" in Winton Aus, as well as the toilet speedsters Colin Furze, Edd China, Paul Sender and Jolene Van Vugt
Not only is it an awful idea, it's also an awful design, it's awfully engineered, looks awful, has awful ergonomics, an awful environmental impact and no practical use. I'm impressed, it's much better then anything I ever made!
Honestly not a terrible idea to build for a burn. Sure it would probably be destroyed after the week but having your own private shitter is always a bonus.
I don't think this technique would work super well for this project where you are gluing separate parts together, but for making waterproof parts I've had excellent luck with vapor polishing ABS parts using acetone. It's normally done to get a smooth outer surface, but since the acetone vapor melts the outer surface into a smooth layer it also helps seal up leaks between the layer lines.
BTW for plastic welding, you could also use a line of PLA plastic in one hand and hold it with the soldering iron in the other hand and melt the line of plastic to add extra material if you wanted. Kinda like TIG welding. Its hard to explain but yeah.
Designing a toilet from a basic idea of how the trap works, and winging it without bothering to examine an actual toilet. Leaking problems can easily be solved by brushing on clear polyurethane.
So I’ve been around the internet a few times and tbh this the one project build video that actually makes me go. Why? But like in a good backhanded compliment kind of way
Oh my goodness. I'm trying to build a camper van on the cheap and I've been looking at urine diverting toilets and trying to figure out how to 3d model one to print! Like I was doing this just yesterday. Extremely relevant to my interests.
Your Kitty looks almost exactly like my Remi Cat, She's a Grey/White Tuxedo :D My little sweetie kitty. I've also got a miniature Tortie, She's my hyper love cat- looks/acts like a largish kitten and is always sleeping/sitting with me or bouncing off the walls- literally. More on topic- this is fascinating. Nice work!
I'm over here feeling bad because I'm not getting usable parts right off the Hop for parts that take like 20 g of plastic a piece... And here is Emily printing an entire extra large toilet with features. LOL
I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed
Please pin this comment.
@Emilytheengineer why do you think Frank has over a million subs but can not get this many views?
@@johneckerbecause subs stopped meaning anything 3-4 years ago. With the customized home feed it matters who you watch not who you are subscribed to.
Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...
in general bowls have a wide lip, try sit on any toilet with the seat up, the width tends to be so you can clean them more easily@@Deja117
now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)
Gridfinity compatible OpenToilet when?
I can't wait to mod my 3d printed toilet
don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)
inb4 this "open toilet" is blown out proportions and people are walking around in 20 ton toilet mechas made out of PLA
@@LKLM138Everything devolves into skibidi toilet eventually
I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."
The toilet's comedic timing for the "last flush" @ 12:07 is perfect.
You’re right. Got me good!!
Now that you’ve mastered printing large parts and welding them together, you should make a life size 3DBenchy and boat around in it.
This is gold.
get a motor and make a 3D printed toroidal prop. (also, for the love of God, add a bilge pump and a triple hull)
Aaaaaan She did it now :D :D
omgaa she did it
You told the future
If my daughter 3D printed a working toilet with all of those features, I'd sincerely be beaming with pride despite my wife's review of this video.
Your wife seems very critical, looking at the comments you’ve made on this channel lol
@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.
@@jonathandill3557 She's probably a nice person nonetheless!
@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer.
Printing something actually useful?✋🏻
Printing something that I probably shouldn't be printing? 👉🏻
There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.
And physical health!
this is so accurate, and somehow also represents my life with my wife.
and sanity
This is like if William Osman and Michael Reeves had a daughter, the chaotic energy is hilarious and I love it. Definitely subscribing.
William Osman did have a daughter.
He calls her potato.
He meant a daughter of both william and michael reeves@@YossiRafelson
@@YossiRafelson So you're saying Emily's channel is a viewport into the future because Emily is Potato?
They were roommates, they couldave and that cept it secret
Just curious how would 2 men have a daughter…
Emily: "You deserve one, last, good flush"
Toilet: "How about no"
Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.
This is a magnificent idea!
Yes!
Crab walking crap chair
The toilet from better call saul
Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.
that's it's whole own 24/7 hobby.
if you have uses for plastic block or plate things its far easier to melt and cast/form that way
So now you make a grinder & filament maker & recycle the whole thing. And all those other things. It'll be a hoot.
Shush you horrible person, they are a great creator.
boring
Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.
This video taught me how a toilet works.
same
For the most part. It's not completely accurate.
if you could print a clear one you could better see how it works
0:09 While everyone is talking about the toilet gag, I want to know, WHY HAVEN'T YOU PAINTED THAT ROOM PROPERLY????
This was a gag?
nO TIME FOR THAT NO MORE NEVERM
My thought exactly
and nevermore@@draxgoodall3685
Good enough is GOOD ENOUGH!!!
Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?
It feels like Emily is reviving a phase of kids playing with “pooping” dolls
you could totally turn this into a flower bed, I mean its a rainbow of colours it would fit right in a garden it even has that art gallery vibe to it
PLA toilets are little hobby of mine, I also love chaos and abstraction, this video checkss more marks than i thought its possible
The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!
Kind of really like the weird 70s ArtDeco thing you got going on. It's like if Mondrian made a toilet.
Somebody put that toilet in an art museum
The Wheel breaking off the second time right before you wanted to pour the water in is such comedic timing, this Toilet is a paid actor
Truly the cursed content I am here for.
I am *so* there for more of whatever this is.
Ive discovered those garbage 3d pens are actually awesome 3d welders. Their tips melt the seam you trace and they fill it with filament
I like to imagine the inventor of the flushable toilet getting equally exited at the first successful flush.
As an engineer; I am screaming in my head. What a f-ing chaos 😂 no thoughts, just dos.
The line between genius and madness is very thin, Emily came, murdered the line, chopped it to pieces and used it to feed 3D printers...
Emily’s war on the Environmentalists continues😂- This was absolute beautiful chaos and I’m here for it!
She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.
emily needs to do a collab with greta thunberg
I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack.
Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!
So many pieces for something that large. You could really use a bigger printer. Maybe a 10' tall one?
This would make an amazing lawn ornament / bird bath. It's self refilling and can be easily cleaned by flushing. The birds can perch on the arm rests and even get snacks from the cup holder.
DAN AS THE EPA LOL
How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol
i think itd be a nice ride with 2 rear hub motors and 1 front fork for steering. so close to a street legal mobility toilet
I haven’t checked on you channel in almost a year so I’m now watching all videos from newest to oldest and every time I see a video title I die laughing, good job
This is the best video I've watched in a while 😂. Please keep on doing whatever this is, Emily.
“How did you get the camera?” Is so funny. Love subtle meta stuff like that
I think Emily should lose her 3-D printing pass for a week😂
The amount of direct and indirect waste (no pun intended) with 3dp is astonishing.
Emily's just insane enough to be amazing
another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare
And then set them in the sun for the UV resin to cure ?
Would it work under winter sun though ?
Never until I found this channel a few days ago had I seen someone with such relatable levels of ADHD. I approve.
The chaos is infectious. Never thought I'd see a 3d printed toilet, solid effort!
that thing looks incredible
This would make a cool flower pot.
There are several world firsts in this video, including using a hover board while using a toilet.
I am really surprised that nobody tried putting a candy bar inside to see if it would flush.
This is amazingly funny. How about you make a huge 3D printer and print an igloo, next?
I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor.
I'm so glad I found you on the Maker Secret Santa. Have a happy new year!
Thats where I found her too
I love the whole vibe, reminds me of the sphere plastic puzzles!
How can you see this title and NOT click ?
Honestly I agree like the title of this video is just too good to not click
At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.
Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.
Ok here me out Toilet racing. Also why is this one of the most glorious things I have ever seen 🤩
For an actual toilet race, Check out the "dunny derby" in Winton Aus, as well as the toilet speedsters Colin Furze, Edd China, Paul Sender and Jolene Van Vugt
I did a thing but a girl
correct
wtf
Not only is it an awful idea, it's also an awful design, it's awfully engineered, looks awful, has awful ergonomics, an awful environmental impact and no practical use. I'm impressed, it's much better then anything I ever made!
Not recycling that PLA. The world needs an inflatable toilet.
12:03 is the best moment.
Emily: "You deserve one last good flush"
Toilet: *dies*
This might be the first time in history that a member of homo sapiens has decided to 3D print a full sized fully functional toilet.
"Curse you tiny toilet"---vector from the minions suggestion u should have used Nutella for poop for the mini toilet ,just sayin,. 😎👍0 0:36
“I already committed to the bit” oh I feel you. 😅
Honestly not a terrible idea to build for a burn. Sure it would probably be destroyed after the week but having your own private shitter is always a bonus.
It's not wasteful if it's full of waste
I don't think this technique would work super well for this project where you are gluing separate parts together, but for making waterproof parts I've had excellent luck with vapor polishing ABS parts using acetone. It's normally done to get a smooth outer surface, but since the acetone vapor melts the outer surface into a smooth layer it also helps seal up leaks between the layer lines.
This channel is like the alternate timeline where william osmans house didnt burn down & he still builds stuff
Seeing the toilet with the wheels at the end made me wonder; Could you print a wheelchair? :D
BTW for plastic welding, you could also use a line of PLA plastic in one hand and hold it with the soldering iron in the other hand and melt the line of plastic to add extra material if you wanted. Kinda like TIG welding. Its hard to explain but yeah.
Highspeed TPU is the easiest filament to get waterproof IMO. I build hydroponic parts out of it all the time.
Designing a toilet from a basic idea of how the trap works, and winging it without bothering to examine an actual toilet. Leaking problems can easily be solved by brushing on clear polyurethane.
This was utter chaos and I loved it!
with the leftovers of the toilet you might need to do an episode on making your own filament recycler. lol
I’ve been looking forward to this since that Safety Third episode
This needed to be done-- thank you Emily.
New to this channel, and I took me literally 5 seconds of this video to know... I need to see more. Fantastic intro!
Now this project validated you making a video on recycling ruined prints 😂 enter that den of frustrations
"What's that? She CAN come to the phone?" made me cackle. Great video
I'm actually quite impressed by the whole flushing mechanism. Very enjoyable and chaotic video
I love it when people reinvent something that’s already made
You should buy/make one of those filament makers that melt down failed prints and extrude it into filament to be reprinted
Use indexing features when designing pieces of large prints like that.
this is the best creation i have ever seen
So I’ve been around the internet a few times and tbh this the one project build video that actually makes me go. Why? But like in a good backhanded compliment kind of way
I feel that pain. I have so many boxes of failed parts. I call it the "fail box".
My 3d printed sruff always used to come apart, sod rebuilding that after its had some action
3:25 HHAHAHAHAHAHAHHAHAHAHHAHAHAHA!
That was definitely worth it.
10/10
Shark tank would never knew what hit them
Fabulous concept and creation
You should add a motors, the wheels make it movable
The toilet adhd built. Glorious. Unmatched. Unique. How much for it
It's not about "should you do it", but allways about "can you do it". And possibly "can you attach wheels to it?"
This probably would have benefited from more study on how a toilet functions.
Oh my goodness. I'm trying to build a camper van on the cheap and I've been looking at urine diverting toilets and trying to figure out how to 3d model one to print! Like I was doing this just yesterday. Extremely relevant to my interests.
Try Polymaker PLA and plant a tree. It's PLA made from trees and is biodegradeble. I use this stuff all the time and love it.
9:10 actually spat coffee across the table…. This creased me up!
Your Kitty looks almost exactly like my Remi Cat, She's a Grey/White Tuxedo :D My little sweetie kitty. I've also got a miniature Tortie, She's my hyper love cat- looks/acts like a largish kitten and is always sleeping/sitting with me or bouncing off the walls- literally.
More on topic- this is fascinating. Nice work!
the chaos is of the most superb quality, and the projects are meme-worthy
you got a sub from me :)
This is so chaotic... So cursed.... Chaos engineering next to cursed robotics. Totally subscribing
Your videos are a pendulum that swings between well engineered ideas and absolutely unhinged chaos.... and I'm here for it.
I don't know if the toilet falling over when you were trying to give it a final flush was a bit, but it really got me 😂
I'm over here feeling bad because I'm not getting usable parts right off the Hop for parts that take like 20 g of plastic a piece... And here is Emily printing an entire extra large toilet with features. LOL