NEVER Before Installed EV Charger...HOW TO Install The Indra Smart Lux & Some Essential EV Tools.
HTML-код
- Опубликовано: 9 мар 2024
- Today I installed the Indra Smart Lux 10m tethered EV charger, I have never installed one of these before so I thought I would take you along this new journey with me for a completely unbiased look into the charger, the good things, the ANNOYING things and a look at some tools along the way.
Hope you enjoy!!
DISCOUNT CODE: SOTA-10
10% OFF ALL PRODUCTS AT VANGUARDIAN.CO.UK
DON'T FORGET TO LIKE MY VIDEO AND SUBSCRIBE TO MY CHANNEL!!
(PLEASE) :)
WHO AM I:
I’m Adam the electrician based in the south of England (Portsmouth).
I make videos that show my everyday working life installing EV charging points along with other electrical installations hopefully sharing some useful information and tips.
VIDEO LINKS!!!
THE JET RACK - FULL INSTALL VIDEO
• How To Install The JET...
THE LED LIGHTING INSTALL
• Putting The Van Back T...
THE RACKING INSTALL WITH YOKE VANS
• Van RENOVATION!! Beaut...
GARAGE INSTALL VIDEO WITH A DUCT!!
• I took on an IMPOSSIBL...
Check out my previous video, there epic!!
INTERNET WALKTHROUGH
• THE ONLY Zappi video Y...
AMAZON BAN
• From HOPE to DESPAIR: ...
• Turning Nothing into S...
Please also find and follow us on facebook, instagram and TikTok!!
/ sotaelectricalservices
/ sota.electrical
/ sotaelectrical
This video is for entertainment purposes only.
#ev #electricvehicle #evcharger #electrician #house #home Наука
Could some of the data boys explain the thinking for using jelly’s and not Wagos please?
Box spanner for stuffing gland over the cable?👍
Great Work! Glad I came across your channel a couple months ago. Very helpful as considering a career as an electrician. Keep up the awesome work.
Thank you for watching!! 👍👍
I've got a set of the 5 tread Little Giants and they're worth their weight in gold! Couldn't recommend them enough.
That’s brilliant thanks for the feedback 👍👍
Colours don't matter on the cat5 connection so long as both ends support Auto MDIX which basically anything built in the last 20 years will support. When I did my CCNA course they harped on about crossover and straight through cables like your life depended on it, meanwhile in the real world everyone had moved on. Auto MDIX works by probing the other side to see whether it has been wired back to front (like a crossover cable) or randomly by a sparky trolling his viewers.
Hi, I just watched your short video on a customers charger only charging one car, well I had exactly the same problem. The issue was one of my EV was going into sleep mode. I would plug in about 4pm schedule to charge at midnight by this time the EV went into sleep mode and would accept the charge. Hypervault logged into my charger remotely and changed some settings now works fine.
Ah that’s great, thanks for the info!! 👍
Fantastic work as always mate. Your channel was a great find. Keep it up mate 👍🏻
Thank you sir 👍👍
getting a bit tired of seeing so many chargers come to market and they expect you to complete a training course for each brand. It feels like each time a customer buys a weatherproof socket you need a training course for the brand of socket! I know its more than a socket but bloodyell, each week another one pops up!
I know what you mean
Neat job, haven’t seen too many Indra chargers, I think the Zappi’s and Ohmes are taking the lion share of work.
Thank you, yes they certainly are!!
What is a lowcatalment (when you mentioned wiring the cat5 cable from the EV ultra) with the hardwired internet
It’s what protects the main cut out fuse basically
Changed all my ladders to little giant, 100% recomend!
Thanks for your feedback!! 👍
Lol how can indra get angry when they sale the product and provide training. Training obviously isn't that good if the installers think they have to call to commission the product. Great video really enjoy the content
Do you have to install the stuffing gland or is that just personal choice? Will silicon not be enough?
Silicone is definitely not enough
Hey there, noticed the bin at the start says Hampshire, could you give me a quote to install a charger at my house in Ferndown if I supply the charger? About 30 mins from Southampton :)
I have a 100A main fuse and the meter box would be less than 10 meters from where I want the charger. I'd like to go the route of having one of those outdoor PEN-Fault protected mini consumer units installed next to the meter box.
Thanks!
Yes or course, drop me an email with your number and ill give you a call
Enquiries@sota-electrical.com
Followed you for a while, you know EV charging well. Would you make a video on steps on installing and what information one needs to know prior during survey for e.g cable length etc
Thanks again for your content you doing good job
If you were to provide ev charging tips and tricks course i would pay what you ask for it.
Thank you for your comments! Ok Il do a very simple walkthrough video on surveying a job, bear with me though! I have a lot on at the moment my friend 👍👍
Appreciate your response alone, thanks again and brillant work.
@@avantgarde70 thank you sir
Could potentially 3d print a tool to do up compressions glands face on similar to the rothenberger tool for taps
That’s a great idea
Little giant steps…. I found they weigh a ton compared to normal steps & have an extremely annoying loud click bar installed on the last step which is irritating if your up and down a lot or trying to keep noise down if a customer works from home
Ahh that’s interesting!! Thanks for the feedback!! 👍👍
100% agreed on all points. Have a set and almost always leave them and revert back to my smaller steps.
@@Kenny.M.CFC.1888 understood!!! Really appreciate everyone’s feedback on this
That’s only on the green fibreglass ones I think. The last tread with the warning click 🤦♂️😂
The A frame are brilliant (Heavy though)
They are on wheels. But great on uneven ground stairs etc.
@@user-wv6jl5qw3u brill thanks mate
So how do you commission it then, looks like an awkward install and a bit of a ball ache to commission?
They have a web based app you have to use
Better or worse than a hypervolt?
Difficult to say, not a lot in it
PS do away with the hook as that rubber boot gets water ingress, when my spark was installing mine had to call them because of tech and my voltage was 252v on my supply, I’ve changed my earth arrangement for TT instead of PME Indra tech didn’t want the charger settings changed for a TT so I told the spark keep it as a TT as the system is a TT not a PME and I want it wired as such, I polled my Shelly devices and they registered spikes of 254.5v at points which as far as the spark said would have cut out the charger. After months of chasing the DNO I got them to tap the line now max volts 250v. PS my spark was using the engineers portal to commission he was a good lad showed me it as he was going through it .
Great comments, thanks for watching!! 👍👍
Absolutely horrendous chargers ! Connectivity on them is years behind, generally very poor in comparison to what else is on the market ! Red flashing lights will be the tamper sensor, poor placement on both the Smart Pro and the Smart Lux which might I add is just the Smart Pro in a different case. I don’t hate Indra by the way. Just have no time for poor products which unfortunately they are in my professional opinion.
All comments- fair, thank you for watching and commenting 👍
Ev charger manufacturers, use bloody captive screws
Yes! Agree!!
So you pay to do their installer course....then you pay to buy one of their products and they are not happy when you ring them to commission the charger..... Well they can go and feck themselves then
Just to clarify, you don’t pay to do their course, I may have just picked a member of staff that was having a bad day, you never know
Customer support goes a long way.....feck em anyway😂
Joking fella.......enjoyed the online chat as well this evening......well done
@@markyd2633 thank you for joining this evening and getting involved! Appreciate you and your time 👍👍