Nissan Titan Blower Motor + Resistor Replacement and Diagnostics (2004-2015)
HTML-код
- Опубликовано: 10 сен 2024
- In this video I show the steps and procedures necessary to replace in properly diagnose a bad blower motor or blower motor resistor in a Nissan Titan. If you have a Nissan armada or Infiniti QX56 these procedures in parts will be the exact same. The truck I’m working on is a 2000 1410 titan with 256,000 miles. The blower motor has failed and in the beginning of the video I show how to properly diagnose and make sure you were getting correct voltage to the blower motor. Make sure to check The links below for a good price on parts. If you have any questions or comments feel free to leave something in the comment section. Thanks for watching and enjoying
BLOWER MOTOR RESISTOR W/ auto climate------------------------------------
amzn.to/2XktWJe
BLOWER MOTOR w/ manual climate-------------------------------------------------
amzn.to/2GlMcLn
BLOWER MOTOR--------------------------------------------------------------------------------
amzn.to/2LCPAaH
If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
paypal.me/aaro...
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
Au...
Perfect. I learned the diagnostics and repair without a 30 minute introduction about where you bought your truck. Every video should be like this.
I just fixed my blower motor on my 2006 titan. Before the fix it seldomly worked at all. I removed the blower, unscrewed the torx head from the blower motor bracket and removed the motor with the fan still attached. I used snips to cut a access hole by snipping out the air vent on the side of the motor. I attached sandpaper to a screw driver, inserted it inside the motor and turned the fan while I scuffed the spot where the brushes make their contact. Once that contact zone was as shiny as a new penny and I blew the dust out and I reassembled the motor into the bracket . I reinstalled the blower motor and it worked near perfect. I am in hawaii so I saved a few bucks and a long wait time.
Super informative and clear on the diff between blower resistors. You have the knack for simplicity, which many other RUclipsrs don't do well. Thanks so much for the info.
Hey I wanted to thank you. I was going to bring my truck to a mechanic to have it fixed and he was going to charge me around 300 dollars to diagnose and fix it. It turned out it was just the resistor and your video helped me figure out where it was. thank you!
Thank you for this video, it was EXACTLY what I needed done, took about 10 minutes to do the job, old one out, new one in. Bing,bang,boom, DONE. It was the resistor that needed replaced.
If you happen to not have a 5.5mm socket, you can use a 7/32 standard size socket,as it's almost the exact same size
Just what I needed to know. Thank you.
Heck yeah, so glad i ran across this video, my blower went out this past week when the temps were in the 90's, such a simple and easy fix thanks to this video
i dont mean to be so off topic but does anybody know of a method to log back into an Instagram account..?
I somehow forgot the account password. I would appreciate any tips you can offer me
@Van Marley Instablaster =)
@Lian Asher Thanks for your reply. I got to the site thru google and I'm in the hacking process atm.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Lian Asher it did the trick and I finally got access to my account again. Im so happy!
Thank you so much you saved my account :D
@Van Marley You are welcome :D
Thank you for posting this video!!!!
I was dreading having to tackle this, expecting to have to remove half the entire dash assembly.
I can't properly express my relief at seeing how easy this is. 😂
Super helpful! I've been riding around in my 08 titan dealing with this exact issues. I've just been too afraid it would cost like $1000 to fix. Looks like I can do it.
Good information. Straightforward, to the point, good step by step, no “advertising or exhalation” of yourself.
Thanks! I have no power going to motor at all! The fuse you showed is not burnt! Lucky my younger brother is a mechanic by trade. Together we should fined the problem. 2005 Titan with 230,000 miles.
did you ever find the issue?
@@71970eli Resister was bad........! Burnt smell coming from it! Thanks!
This was SUPER easy to do after watching your video. My titan and I appreciate the tutorial Aaron.
Glad to hear!
I looked at your video it helps me thanks
First! I have been watching all of your videos and loving them! I recently bought a 2007 Nissan Titan (First Nissan I have ever owned) and you have been a great resource. So far, I am loving how easy the truck has been to work on, with a lot of the repairs being much easier thanks to you. Keep up the great videos!
Thanks for the support! Glad the videos help out. These really are great trucks!
Thanks for this again, I have a 09' . Last year blower was stuck on high and changed the resister and fixed problem. Now blower doesn't work at all and know how and what to check . Another video suggests changing both blower resister and blower motor at the same time because if one failed its only a matter of time before the other will also. It took a year but they were right. Also hope that you have blower resister shown in video, it's pretty inexpensive ,around $20.00 , if you need the other type which I did its a $100.00 from Nissan dealership
Thanks bro...... it was just the Resistor
Thank you so much! I was able to change my own blower motor out in a very short time because of your instructions!
this is an excellent instructional video, one of the best ive seen
Exactly what my 2007 titan was doing. Only one speed on the fan control and then yesterday nothing works. Going to use your directions to get system working before it gets hot here in AZ. Thanks.
I have the same issue with my 2007 titan... was this the issue and did it get fixed??
@@ramonahigh Yes I have all the speeds now. Easy fix
@@StreetTruckinTitan did you buy the parts from Nissan?
@@ramonahigh Amazon
@@StreetTruckinTitan did you replace the blower motor or the resister ?
Thank you very much Aaron. I actually fixed my A/C issue.... LOL I rock, well with your help!!!! Cheers!!!
Thanks! Lovin my 2006!
Woo hoo! It’s another Titan video! Thank Aaron!
You make it look easy 😮😊. God bless you.
Extremely helpful. Thank you
Very helpful, I appreciate it🥇
You saved me 200 bux. THANKS!!
Hi Aaron, I just recently got a Titan myself and have found ALL your videos to be extremely helpful! A problem I’m having is I don’t get much air pressure when I use the A/C and found there was no cabin air filter when I got the truck. I put one in and cleaned out the blower motor which was full of leaves/twigs and it still has almost no pressure. I was wondering if you could maybe make a video showing how to get to the A/C evaporator coil because I’d like to check that next! Please and thank you so much! Great vids!
Thanks man, this was perfect!
Sweet good job and explanation in the video. Thank u
Thanks! Just ordered my part
explained very well thank you
Thanks alot. I hope you are getting alot of money for these videos.
Hopefully one day! Thank you very much
Thanks for the video. It was very helpful !
Thank you for the simple it help me a lot
Great camera angles
Awesome information. Thank you for sharing. God bles👍💯
What did you mean turn down the lower motor to test the resistor
Thanks great video
Some Titans that have a manual control system on some models have a variable speed blower switch. The switch has no speed settings 12345. The speed switch just has a 0 and adjusts to high speed as you turn it up. This is a variable speed blower switch. It uses the same resistor as the automatic control system. It is the 5fin resistor from Nissan,four fins on most aftermarket. If replacement is needed take out first and check it to get the right one. The one fin resistor will not work on the variable speed blower switch with the manual climate control system.
Thank you 🙏
I replaced the blower motor resistor because my fan switch only had two modes, off or max speed. It worked for the first three days, and now it doesn’t do anything at all. I’m guessing the blower motor itself is now shot? My Titan is a 2007.
When I turn mine on it clicks a relay but nothing.
Any clue how I check the resistor pins are working on the wiring harness?
Great video! When you put the tailgate down there is a light on each side, I replaced the bulbs and they still don't work. Also have a cargo lamp and that does not come on
Replaced my blower last year and now sometimes it just goes off and back on. Moving the wires usually made it come back on but its getting worse. Also its not very cold and my back seat vents dont blow much air is there a filter back there somewhere?
Why did you change the resistor, just because you were already working down there? Seems yours was fine.
2005 titan SE. Blower fan stopped working. I checked the fuse and it is good. I replaced both VBC/blower resistor and fan blower but it’s still not working at all. I am measuring 12vdc at the fan plug when I turn it on but the fan does not blow . Any help will be appreciated.
The blower motor you have linked shows it's for up to 2008, will this linked blower fit into a 2010 titan?
Mine has the other resister but I have the same controls as you
One day my blower just stayed on high. Won't shut off. Is that the resistor?
I've replaced the resistor a couple of times now (probably erroneously). have intermittent issues with blower working at all. Yesterday went to check the power at blower plug and it came on as soon as I touched it. I wonder if your issue was a bad connection also?
Do you have a video of how to change a actuator on a 2007 Nissan Titan
Quick question...
Mine was stuck on high literally 6month after Nissan re-did my whole ac system... just a few days ago, my ac stopped completely working ... Do you think this is what is wrong With it ?
Your videos are awesome, straightforward and informative. Thank you. What do you think the problem might be if I replaced the fuse, the resistor and the motor. I’m a 2013 Titan sv. Any suggestions?
You did forget to include yhe 10 amp HVAC fuse in the small fuse panel on the passenger side. That was my problem with no power to the blower.
Now if I can find the stereo problem....Radio is on, no sound.
Am I reading this right.. The auto blower resistor and the manual blower resistor or the same part number. It's the same part number for both and he States there are different in the video. Can someone please advise before I before I order.
I have the digital climate control and my test light was very dim when I tested the connector to the blower motor
Thank you ❤️
Hi Aaron. I don't have power in the blower motor connector and I checked the yellow fuse and is good. What's wrong in my truck 🤔 thanks
Awesome vid.
thank you!
I don't have high speed on fan do I just need to replace resistor only or voth.
Having determined the resistor was good, why did you change it out?
Belt and suspenders?
So which one do I get for 2015 Nissan Titan the manual or automatic resistor
I've had my blower motor replaced. Ever since it doesn't get passed like a 2 setting. What do you think that might be?
Nice.
Looking for the correct part for a 2005 Nissan Titan and was advised that this year, even though it was a manual control ac that it needed to have the automatic resistor installed. Have you of this issue before? Also your part numbers are the same for the manual/auto?
I have an ‘06 Titan XE. The resistor is located somewhere different than your video. I want to make sure I get the correct one. Will you help?
So I get nothing when I do paperclip trick .But when I ground the test light I have power there and all fuses are good . It does have dual front climate control 15 Amara
My 2004 Armada the blower is not running while the engine is running. But the blower does run when I put the key on start position. (???)
Yesterday I went to turn on the A/C. As soon as I turned it on, I heard a little pop coming from the passenger side area. I then smelled a slight electrical burning smell. Could they have been the blower motor?
This is exactly what happen to me ... have you found what the issue was
Resister?
Mine resistor was missing altogether, where can I buy those screws? Thank you
Do you have to remove the glove compartment to replace the blower motor
Hi Aaron, I have an 07 with manual controls. I bought a single blade resistor, but when i took mine out, it had 5 aluminum fins. Is this common?
That's how my 05 was ..
Mine is coming on but not sending the air out, any idea?
I replaced the motor and resistor in my Titan and Armada, now they both click randomly. I don't get it.
Got a 2017 Armada, air blowing in the back/rear, but not blowing in the front
My fuse is good but not power to de blower conector 😢
How many volts should the blower motor be sending to the resistor plug in the automatic climate control system? Mine is reading 12v when the engine is off and 14v when the engine is on. I have blown 4 or 5 resistors over 2 months and i think that the motor is bad, what do you think? Thanks.
Did you ever find out
@@eirod It was the blower motor, swapped it out and the resistor at the same time and havent had any problems since i replaced it 3ish weeks ago
I'ma just buy whatever car you own so i know what to do when it breaks down. 😂😂
Great video, would this also affect the blend door actuators from not functioning properly. Replaced them 2x and still getting that darn clicking noise
thank you! unfortunately no, the clicking noise is coming from stripped plastic gears inside the blend door actuator.
Hi I think this is what I have to do ,I have a 2006 nissan titan ,the air is cold but I don't see where it's blowing hard from the front vents ,it seems to blow hard below the dash and above by the windshield.
So I look below the dash and I think I see the blower and the resistor and I'm pretty sure I can change it myself ,I'm not the car mechanic .
But I'm thinking I'd like to just go ahead and change both while I'm doing it .
Do you think it's a good idea or should I just change one ,from what I explained so far .
Also I'm not sure which resistor I should get for my truck ,you said there are two different resistors ,how do I know which one to get ?.
When I brought it to the nissan dealership they told me the whole dashboard would be needed to be removed ,I'm glad to see that's not the case that it can be done from below the dashboard etc .
I think you saved me a lot of money so thank you ,and great video .
Excuse me.. I have the same problem...
What was the problem?
@carlosdelacruz3522 I changed out the parts in the video and what I talked about in my comment but it didn't solve my problem , still wasn't getting any cold air.
I brought it to a mechanic and he found the issue , it was the defrost door motor , said it was staying stuck not letting the cold air come though the face vents .part was like 34 bucks total was 81 bucks and change to get it fixed , so far so good . I hope that answers and helps you with your issue .
ruclips.net/video/NNb_Ejn-IXo/видео.htmlsi=Ivf42MFhPj2LumNH
Pretty good show but you did not mention the relay I don't believe
It would be helpful for us women if you could include how to remove the glove box cover. 😳
What happens if the light doesn't turn on at the connector?? The 20 amp fuse under the hood has power going through it (lights up) what could be it??
Did you figure this one out?
@@426emar yeah it was the motor resistor that went bad, so it didn't let the electricity flow to the blower fan/motor that's why there was no light.
@@eirod thanks man ..I ordered the motor resistor yesterday, I hope that's the problem.
@@426emar yeah i changed the blower motor on it as well, just to be sure i heard one can mess up the other and vice versa
My 2006 LE Titan is not allowing us to lower the temperature gauge on the driver's side. Will this help our problem?
no, unfortunately you have a bad blend door motor. the left and right side each have their own air mix door but the left (driver's) side is on top of the heater and A/C case and the right (passenger) side is on the bottom of the case. These are five wire units. Two wires are responsible for rotating the motor depending on the direction of current flow. The other three wires are for a sensor so the control unit can tell where the door is. Also, these motors generally have a master spline and they can only be installed in one position. Make sure the correct replacement part is used. Nissan calls for the dash to be removed to gain access to that blend door but i have done the job without removing the dash. 1. remove radio-glove box to access servo on top of blower box. was able to take center vent stack & glove box out, pry up on vent and get long extension w/swivel to get screws out & remove actuator. good luck
@@AaronHinesAuto do you have a video on how to do this?
Do Have to remove the glove compartment
What happens if you blow out the connector? While running the test I accidentally touched the negative with the positive
Lol
Anything happened?
Hey man my 06 is not blowing all air in the vents, is just make the noise that is on maximum level but in only 1 vent the air is strong enough. I found that my a/c was running without cabin filters since I bought it (7 years ago) what can I do, I live in AZ and the heat is crazy in here. Hope you can help me
did you ever figure it out? my truck has the same problem
The only Titan that came with the cabin filter was the LE trim level. If you want filter in the lower end models, u have to install one yourself.
My 2006 se has two cabin filters behind the glove box!
Fixed mine with a hammer. I couldn't find a 5.5
I am having problems with my heater it doesn’t get hot
Heat control valve may not be working.
Mine just gets load when I use it on high speed, anyone with the same issue?
My blower motor works untill I start the truck then it quits
8
RUclips search for Truth is Christ