DIY 8th Gen Civic Si Throwout Bearing/Release Bearing Install Part - 7 Clutch Job
HTML-код
- Опубликовано: 2 окт 2024
- Installing my throwout bearing on my transmission. I'm using an exedy pro clutch kit for this job. Stay tuned for part 8, Flywheel, clutch disc, and pressure plate install! Thanks for watching #exedy #exedyus #prokit
Dont use compressed air to clean inside of the clutch casing. Clutch contains azbestos and this behavious is dangerous for anyone in the vicinity. Only brake cleaner.
So no one's ever told you not to use an air hose to clean that crap out? Pretty sure it's not supposed to be anywhere near where you are breathing. Just something to think about lol.
@C Moore You must be an idiot, aren't you? I'm far from what you'd consider a "liberal." Calling someone a liberal just because they point out you shouldn't be breathing in clutch plate dust? Seems like solid logic.
@C Moore Also, how many actual "liberals" tend to be able to pull a trans and change a clutch? I'll bet not many associate trans with a car period. Lol
I just got a 08 FA5 FD1 Swap for my 03 Pilot lmao. What do clutch do I put in. It’s missing the hood latch all the wires are showing and also the light dimmers i believe. It has no exhaust tip and it’s rebuilt. Lmaooo. the pilot has Falken for snow beefy. I got it for 7 flat. So I have to pay for this. The pilot had bad power steering hoses and the trans slipped sometimes. I loved it so much.
Wear and tear fragments particls
Dude i was doing my Brakes this weekend and my buddy sprayed brake cleaner in his eyes!!! it was crazy how he managed to do tha,t but it killed him.... not really, but you know what i mean.
+gMoney Buddy damn man, doesn't sound like fun! I try to wear safety glasses when I can haha.
That's the crazy part. He was! The stream bounced of the rotor and found its way through a small spot.
Did u use the throwout bearing that came with the exedy kit or did u go with an oem honda. What would u recommend
I used The one that came with the exedy kit. Oem honda parts for the win though. You are going to pay more, but they will last the longest
@@TheGerbsteve did u use exedy khc10?.. I'm about to get that clutch for my tsx gonna put an exedy lightweight flywheel.. would u recommend that clutch or should I go exedy stage 1 .. I really just want the best feeling clutch
I’m not sure the exact part #, but it’s running still and is made in Japan. Keep oem clutch if you want that easy feel, smooth, and most longevity.
I can't find the very beginning of these videos..I'm gonna be dropping the trans to replace my throw out bearing and wanna see what u did from the start ...if u can help a brother find the video thatd be great.. appreciate your videos
Thank you for this video! I have a question. My fork is really loose (I have the transmission on the ground) and when I move it and doesn't spring back into place. Is this normal? I can't tell if you're moving it forward and back on your own or not. Thank you
+Sayyid If I could go back and replace it, I would. I recommend that you do the same thing. Get a new fork and spring.
Gerb Productions I don't hear the noise anymore so I guess I'll just wing it until I hear something else.
I had to get a new pivot ball,fork,spring tried reusing old was too worn out.
When i do my k24 swap, i'm going to replace all that too. Mine weren't in the best condition either.
Have a 1998 Honda prelude. Clutch swap due soon
Not good to spray, use brake cleaner
Is the shaft replaceable? Mine was broken when i removed the transmission
Now I've got all the cluch water and tear dust all over the place
Did you have to adjust the play in the clutch pedal?
U weren't supposed to grease the spine gear neither
60k miles later and she still runs
Have you ever herd of misaligned clutch fork ?? Installed new clutch and now car so t start. Just cranks over , some say might be Missligned clutch firj
+marcus alcala Yes. It is tricky to get the fork back onto the tranny when you take it off. The fork has to rest on the ball with the metal clip.
Yea my friend and I did his S2000 and it was so difficult!
I put it on but it comes out farther did i do something wrong
+Osmaide Palacio The actual clutch itself or?
Use brake cleaner and spay those dust, so it does not become air-bone. Those dust is bad for your lungs. This is a disaster tutorial.
@@TheGerbsteve Of course, i will avoid you at all cost.
Gerb Productions lmao
@@liamle8471 Deal with it 😂
hey dude
my clutch makes a grinding noise when im taking off from being idle to 1st and then from 1st to 2nd
does the whole clutch need replacing or is it a component of the clutch system?
+Usman Tariq It could be one of the components or your synchro
Gerb Productions could you give me an idea of what component it could be ?
+Usman Tariq I'd say it could be your throw out bearing or synchros. What's the Mileage?