Just The Tip - Ep 06 - Diatone Mamba G4 Alpha 40A AIO / All My Alpha Configurator Settings
HTML-код
- Опубликовано: 28 авг 2024
- I've been getting a lot of questions about my Mamba G4 Alpha AIO setup, so I thought I'd just do a video with all my Alpha Settings from Every Screen. Every screen is shown, all of my current PIDS, Rates, and Settings that I use on my Armattan Beaver 5".
Rogue-16
Frame - Armattan Beaver 5"
Motors - T-Motor Pacer V3 2306 / 1750KV
Flight Controller / ESC - Diatone Mamba G4 Alpha 40A AIO
RC Link - ELRS
Video Link - Walksnail Avatar HD
Goggle Strap -Custom Fatstraps FPV
Props - Gemfan Hurricane 5.1x4.33x3
Batteries - Speedy Pizza 1200Mah 6s / GNB 1300Mah 6s
Radio - Ethix Mambo
Antennas - TrueRc
HD Cam - Hero 12 Black - 4k30 / BMC3D Mount
If you found this content helpful - buymeacoffee.c...
Please Subscribe to my channel, hit the Like, and click the Notification Bell icon!!
My Betaflight 4.2 / 4.3 Community Presets Repo: Branch - FpvRogue-Presets
github.com/Fpv...
Check me out on Instagram - #fpv_rogue
Facebook - / rogue.fpv.52
Get your Plunder on with ROGUE FPV MERCH here!
www.zazzle.com...
I just got me a mk5 right when they got back in stock. Will be my first AIO and experience with fettec. Didnt notice the flash chip not there but ill be aight.
I thought I was subbed to you, I am now. Awesome stuff!
Thanks Brother!! 🙌
@@Rogue_FPV Thanks right back atcha! Helluva awesome source for fpv knowledge. Keep it up my man!
Good stuff brother!
Thanks bro!! 🙌🏻🙌🏻
subbed Thanks! Ive got a mamba mk G4 AIO.... ive set up most of the fc but it wont arm and I see a message saying "FC not activated".... Any ideas?
I have had that problem a few rimes before.
1. make sure that your connected to the internet when you plug into the Alpha Gui - I use the web version personally..
2. Backup your config and re-flash firmware to the FC, usually right after a reflash the Gui will check the serial # and activate the FC.
3. If that does not activate it, you can reach out to Josef Dahari on Facebook and he can get your serial # added to the activation list.
Ive just got betaflight down, OOOO NOOO NOT ANOTHER HELP😢😢😢😮
When you are ready to come to the Dark Side, I got your back Brother!!! 😆 💪💪🙌🙌
Got the mk5 mamba f4 aio cant get elrs to go through fc wiring is 5v,gnd, tx to s1 and rx to tlm2 is there something i am not turning on or what never used alpha b4. Noticed your msp port and turned off vtx serial. Is there a place to turn on reciever serial?
In the Receiver section, you can try changeing the receiver protocol from Auto to Crossfire. My wiring is the same as yours TX to Sig RX to TLM.
@@Rogue_FPV yea tried that it also picked up reciever once said it was crsf but not now and it told me fc wasn't turned on! What does that mean?
@@mitchfowler646 if you are getting a message that says Fc not activated, that means that there was an error with the online activation of the FC. If it doesn’t eventually activate, you’ll have to contact Fettec support and give them the serial number number so they can activate it.
@@Rogue_FPV ok thanks
Had to map to id in radio never had to do b4 but now everything backwards my radio is aetr but it is actually reversi g aux channels roll and pitch backwards not connecting to computer sometimes then says in bootloader mode all motors wont idle up switches between lf and rf can't spin motors up in program now switched 3 usb cables does with all this thing is crazy. Followed you and drainman setup videos. Have no idea how to fix
fettec is terrible :( sigh
Would be a lot easier if they had built in flash storage for logging…
@@Rogue_FPV really wouldn't help imo... Why would I ever do any of this when ultra exists... I'm. Not into hitting myself in the balls over and over. I'd rather fly best right out of the gate. That's why I fly ultra