Just wanted to thank you my brother. You've taught me so much cool shit and don't even know about it! Fpv the coolest hobby ever! If you don't know now you know...
Thank you! I re did my OG chameleon w a Ti cage and Kiss when Fettec was first released. It worked great, until I crashed. I couldn’t find any physical damage and can’t tune, so I could never get it back to how it flew pre crashing. It’s been sitting on a shelf for years. I just loaded Alpha, followed your directions and now this is my favorite quad! Thanks again, this is gonna be fun!
Hi happy new year I bought a Fettec 35A -N for the first time and I'm following your video for the right configuration with ALPHA you say that if a green LED remains lit it is not configured correctly, but in my FC there are 4 blue LEDs lit and 1 green LED lit at the same time! what should I do? also what is the right Firmware for ESCs on ALPHA? Thank you for your very precise videos
Hi man, such a helpful video. I’m actually going to run Fettec on my 5 inch I’m going to build now ! Instead of BetaFl. Will jump around your vids, keep them up to date. Great content btw 🫶🏻
great content as always! picked up one of these frames but I have everything but the camera cage. long shot but if you got an extra can I buy it off you? 🤔🤔🤔
Felix Niessen(Main Kiss Dev/Inventor) left flyduino und started FETtec with 2 coworker. First with the FETtec F7 and later the G4 and the Alpha Firmware.
Easiest way to build the hottest items is just wait a few days and boom. Drainmam got you covered. What is your 5in quad and tune? Im also wondering if I should get. tbs fusion or the speedy bee. Also I'm using t-motor racewire. It's not fettec you elaborated only fettec if I don't know what those are should I leave it.
Very nice video and helpful. Just a quick question. If I run the esc board (fettec) in the standard position with the leads on the back, do I have to chose something from the settings in 26:32?
come on guys DRAINMANFPV has been making quality HELPFUL content for years now. lets blow his channel up with likes so he can grow some. only having 15K subs is a crime for this mans hustle.
Hi DM, thanks for your great tutorials, please let me clarify a few things about this Fettec alpha: I have on one of my quads, a Fettec F7+ ESC and I've used for it until now, the Kiss gui, before I connected DJI Vista/cam system to FC but recently I mounted DJI O3 and now in my DJI V2 I lost the OSD, so please let me explain, if with Fettec alpha FW I can recover the OSD on my V2s, and I would like to understand if I can use all the settings and values of PID, RATE, IDLE UP and what else I currently set on the Kiss gui on the Fettec alpha, because with great effort I tuned and set the values for a good flight result and I would like to keep them and not lose them, really thanks if you help me with an answer, Dino from Italy
I think the part I overlooked, I had to watch this again before getting back to it, is on FC setup the motors numbers are not in the same spot as betaflight. Looks turned around. And I already manually remapped them, I forgot about that drop down. So maybe my drone gets fixed today.
hello sirr.... i have a question about how to setup fettec... im using fettec stack from geprc... my problem is a dsynchronize ... can you help me how to fix... because my throttle is always jump over when i hit the throttle up... and dont want cut..
Apparently anybody with old fettec f7 etc need to email the manufacturer their sn otherwise you will be seeing FC NOT ACTIVATED. I'm seeing it now. After hours of settling up this alpha firmware I won't be able to fly it today:(
Awesome video bro. This video will help so many new alpha pilots.
Facts
Just wanted to thank you my brother. You've taught me so much cool shit and don't even know about it! Fpv the coolest hobby ever! If you don't know now you know...
Thank you! I re did my OG chameleon w a Ti cage and Kiss when Fettec was first released. It worked great, until I crashed. I couldn’t find any physical damage and can’t tune, so I could never get it back to how it flew pre crashing. It’s been sitting on a shelf for years. I just loaded Alpha, followed your directions and now this is my favorite quad! Thanks again, this is gonna be fun!
I liked the ease of your explanation and understanding
ive been wanting to try alpha, now i have a tutorial by the best! thanks DM!
bro iwas looking for such a vid for so long
THATS BEAUTIFUL.....WILL TRY A FETTEC ON MY NEXT BUILD
Ty for the video this is my first alpha build
Hi happy new year
I bought a Fettec 35A -N for the first time and I'm following your video for the right configuration with ALPHA
you say that if a green LED remains lit it is not configured correctly, but in my FC there are 4 blue LEDs lit and 1 green LED lit at the same time!
what should I do?
also what is the right Firmware for ESCs on ALPHA?
Thank you for your very precise videos
Hi man, such a helpful video. I’m actually going to run Fettec on my 5 inch I’m going to build now ! Instead of BetaFl. Will jump around your vids, keep them up to date. Great content btw 🫶🏻
Thanks for the video. Can you make a video about PID tuning next? You are the greatest. Thx
great content as always! picked up one of these frames but I have everything but the camera cage. long shot but if you got an extra can I buy it off you? 🤔🤔🤔
Felix Niessen(Main Kiss Dev/Inventor) left flyduino und started FETtec with 2 coworker. First with the FETtec F7 and later the G4 and the Alpha Firmware.
thanks vid helped a lot! my quad wont arm and when i go into Alpha it says "FC not activated". Could this be why its not arming?
Easiest way to build the hottest items is just wait a few days and boom. Drainmam got you covered. What is your 5in quad and tune? Im also wondering if I should get. tbs fusion or the speedy bee. Also I'm using t-motor racewire. It's not fettec you elaborated only fettec if I don't know what those are should I leave it.
Hell yeah brotha 😎🤟💯 You the man🔥🔥🔥🔥 thank you.
Very nice video and helpful. Just a quick question. If I run the esc board (fettec) in the standard position with the leads on the back, do I have to chose something from the settings in 26:32?
come on guys DRAINMANFPV has been making quality HELPFUL content for years now. lets blow his channel up with likes so he can grow some. only having 15K subs is a crime for this mans hustle.
Hi, i have a question about motor reverse - so you saying to fly props out - you need to reverse motors 2 and 4 right?
what are the parameters to put in the config.txt file of a external blackbox to be functional with the FC fettec G4? Tks
Hi DM, thanks for your great tutorials, please let me clarify a few things about this Fettec alpha: I have on one of my quads, a Fettec F7+ ESC and I've used for it until now, the Kiss gui, before I connected DJI Vista/cam system to FC but recently I mounted DJI O3 and now in my DJI V2 I lost the OSD, so please let me explain, if with Fettec alpha FW I can recover the OSD on my V2s, and I would like to understand if I can use all the settings and values of PID, RATE, IDLE UP and what else I currently set on the Kiss gui on the Fettec alpha, because with great effort I tuned and set the values for a good flight result and I would like to keep them and not lose them, really thanks if you help me with an answer, Dino from Italy
Thanks for the fantastic video.
Can you go back to BetaFlight if I don’t like Alpha?
I think the part I overlooked, I had to watch this again before getting back to it, is on FC setup the motors numbers are not in the same spot as betaflight. Looks turned around. And I already manually remapped them, I forgot about that drop down. So maybe my drone gets fixed today.
hello sirr....
i have a question about how to setup fettec...
im using fettec stack from geprc...
my problem is a dsynchronize ...
can you help me how to fix...
because my throttle is always jump over when i hit the throttle up...
and dont want cut..
I really want to see a blackbox video. It would be really helpfull.
How do you turn on the reciever wired like supposed to works on radio but not through fc tx to sig and rx to tlm
how do you blackbox log alpha configurator ??? icant find where to find the logs and stuff
When I click open port nothing is identified. My blue boot loader LED is flashing rapidly. It’s like the boot loader is no longer on the board.
my only real gripe is I prefer the 3 input rates of actual rates on BF over the 2 input rates on alpha. that and hardware prices are $$$
Wow
My welding teacher in high school was the first i heard say Keep It Simple Stupid
Apparently anybody with old fettec f7 etc need to email the manufacturer their sn otherwise you will be seeing FC NOT ACTIVATED. I'm seeing it now. After hours of settling up this alpha firmware I won't be able to fly it today:(
not able to arm in Alpha
I sure hope it flies good because the configurator sucks compared to betaflight
the problem is flyduino doesn't make hardware in any quantity to matter. alpha actually is super simple. kiss has become far from that.
ive tried alpha but this shit doesnt work with crossfire, back on kiss
I am running with kiss on 2-3 quads no issues. I run walksnail and OSD works on alpha couldn't make it work on kiss.
Since when ? It works. Perfectly fine with crossfire
Alpha needs some updates imo... It has had a update since last October
they are working a new new version as we speak
Alpha ist der letzte Mist. Kiss ist beste
I have the older G4 version, i.e. without "N". can I still run Alpha? thanks!
yea everything is the same as DM's video
@@savyfpv8048 thanks!