How to change head gasket, lifters, pushrods, rocker arms. Engine knock 2010 GMC Yukan XL 5.3L
HTML-код
- Опубликовано: 6 сен 2024
- Welcome back guys. In this video I got a 2010 GMC Yukan XL with 5.3L and active fuel management system. Those system’s solenoids are known to fail and cause lifters to collapse and cause a massive engine noise, that you will hear louder towards the top of the engine. I will show you in this video step by step, how to disassemble the heads, change lifters, pushrods and rocker arms. Also how to replace the head gasket and torque everything back down. Thank you for watching in advance and please don’t forget to like and Subscribe.
Be sure to follow me on my social media accounts!
facebook: / a2zautomasters
instagram: / a2zautomast. .
Thanks to your video I was able to do this job on my own. It saved me $3k-$4k in labor! Great detailed, step by step instructions. Thank you!!!
Where did you get parts from?
What an awesome video. Great explanation. Good angles. Good lighting. Very detailed. Thanks for the help! Question: The part when your camera died, you started from TDC on Intake side first? Then rotated 360* to torque exhaust side correct?
Thank you for watching and I really do appreciate your comment. So the way you will do this is to set engine to TDC and Torque 1,2,7,8 Exhaust rockers and 1,3,4,5 Intake Rockers all to 22lb then Rotate crankshaft clockwise 360 then torque 3,4,5,6 Exhaust rockers and 2,6,7,8 intake rockers to 22lb.
Thank you buddy help me a lot of my 2009 Cadillac hybrid. Replace a lifter cylinder 7 misfire it’s broken. 😊
This video is great. You really walked me through my 2012 Yukon XL Denali. Great job.
1st time I ever heard of anyone not deleting the AFM.
Did u have to put tha head at top center to take rocker arms off
I have to do a rebuild on my 2011 silverado 1500. This video really helps. Thanks!
Nice video on explaining everything boss. Question does this apply similar to a non afm 5.3
Pretty much without the bigger lifters
Just wanna take the time to say thank and I got too much love for you and your videos‼️💪😎💯💯👏😇
great job. but no thread locker for the bolts?
Does a torque specification apply to a 2007 Cadillac Escalade
Yes basically same engine
Very helpful. This the best video with details
🙏🏻🙏🏻🙏🏻
I think you're better off to do an AFM delete immediately before a lifter fails & damages the cam..
Hey man great video thinking about doing it my self, one question though. So my 08 tahoe lost oil pressure due to oil pressure sensor failing so I replaced the oil pressure sensor and crank shaft sensor, does the loss of oil pressure cause any more damage other than lifters? Will I have to take a look at the oil pump, thank you in advance
If the oil pressure sensor failed that doesn't mean you lost actual oil pressure. So it would not hurt the engine. These sensors fail all the time, it's common. I would not worry about it.
Thank you for share . . Very useful video ❤❤❤
My cylinder 1 lifter is bad
Can i change only 1 side of the lifters ??
It’s best you do them all. But if you must pick and choose I would at minimum do the whole row of AFM lifters. That’s the bare minimum though. It’s better to replace the whole row and even better to do all of them. It would be EVEN better if you did the cam too along with rods and springs.
@darkmatter7399 how much for all that that you just explained? Because I have a similar predicament but I would rather do what you said and just replace that side!
@@anamositykilla2190 for all of the above just the parts is like 1000-1500 depending you don’t need to up the stage of your cam or anything like that and you could probably do it all for 800 bucks for just the lifters the parts are around 200 to 400 bucks. If you are just going to do a row, you need to make sure that your cam isn’t damaged. You’re gonna be looking for pitting or scoring. I would suggest you invest in a cheap bore scope. The issue is this. Taking one side of the head off isn’t going to save you that much labor and if you only do one side but your cam is fucked up what you just did by replacing the lifters is pointless. Also if you’ve done all that work to remove the heads on one side you might as well do it to the other because it’s just gonna go bad in a few more 1000 miles anyway. Parts are cheap labor is expensive. Also while a novice can do this job it’s not a job for a novice lol all your bots once you get in are gonna be torque to yield and will need to be replaced. You might need to extract the exhaust manifold bolts. (Highly likely) if none of this scares you away great! You’re on your way to be a DIY mechanic. Don’t get cocky I would take a week off to do this job in your driveway. To sum up. If you wanna just do half the job it’s your prerogative and will work probably, but you must spin the cam while you’re looking at it to ensure you have no damage and also look at the lifter if it’s warped in any way you need a new cam and on the fly like that you’re gonna pay way more than you would if you prepare. All this being said even if you spend the 1500 and do the work yourself you’re saving money because a shop is gonna charge 4000 to 6000 dollars.
Where did you get the parts to do it?
How did you get the manifild off from the top ? Can hardly fit your hands
Extensions and swivel bits
@A2Z Auto Master what torque tench are you using ?
Turns out the seal for the gasket was written wrong so the front was the back and the back was the front
Like every one say your video is very helpful 100percent agreed.
🙏🏻🙏🏻🙏🏻
Is the little tick normal? Mines did that after fixing
If everything is right, shouldn’t be any tick.
Yes. You can hear it at the end of this video still. It's normal
What do you think?? Make yourself some cool t-shirts to wear when you’re filming the vids
At 34:16 would be the best time to inspecr or change both engine mounts🤙🤙
That’s 100% true. I actually did replace the driver side Engine mount on that truck, off camera
Great video! Helped a lot with my 2010 Sierra!
👍🏻🙏🏻 glad I can help.
Nice
What does something like this cost for labor only ?
Got quoted, 5-6,000 lifters and cam!! As you don’t want to change only one!! You’ve basically already paid them to open it up! That’s where majority of labor was!!
No need to replace the whole head ? I have a 2009 denali the motor shaking and poor idle #4 cylinder has no compression is what the diagnostic says i want to know what do i need to replace, just the lifters , pushing rods and gasket or the whole head
You will have to take the head off and see if piston and cylinder walls are okay. You could do a leak down test to see too but that will only tell you there is an issue. To figure out if piston or cylinder wall/block you will need to get in there or use camera. I am in the same boat on 08 taking it apart soon to see what failed.
Thanks i just remove the heads and yes #4 is bad also all the lifters are the sort ones no spring kinda a wired
@@tavyakangler3419 shoot! I am taking the heads off on mine on Friday and I think 5 is going to be the one with a bad piston. The 6.2L is great when it works but was sad when it died. Spring was broken on 5 and push rod was bent.
Lifters and cam!! Leak test heads!! Get machined if needed!! Never only replace just one lifter or only lifter or only cam!! They all work together!!
@@tavyakangler3419someone most likely did a delete on it, or it didn’t t come with fuel management system
So $2800 to fix this problem on my 08 Yukon is well worth the money.
There should be 16 lifters on each head?
🥶🥶🥶🥶
2 per cylinder,
How did you drain the coolant gm is so stupid with these things
Where are you guys located ?
Sorry for the late response. We’re in garden city NY. Long Island
رائع وومتميز جدا
حبيبي.
حبيبي والله.
You said the pounds for the holders of 106 pounds
? Can you repeat that plz?
@@a2zautomasters862
Is this same setup in a 2008 tahoe 5.3?
@@devotedanaheim1575 yes it’s.
Does the torque specification apply to 2007 Cadillac Escalade
@@deez6686 depends on the engine. If you make an Auto Zone online account for free, the repair guides and specs are usually there.
واحشني جدا ❤❤
حبيبي الله يكرمك.
They want 5000. To fix my vehicle