Does that plug go to the ac compressor? I had a starter and pdm replaced at my terminal and they didnt plug anything on the pdm. So i think the compresser is disconnected
Hey I wached video your video removing starter what sockets you used stater 3 bolts took two out but I can’t remove one is tight am aslo using 16 mm for stater
Hi there, what is electrical wire that a plastic clip to undo for? I replaced my husband's starter on his freightliner and accidentally pulled it out wrong but the wires I just taped together and truck starts up fine. Great video wish I had looked it up.
hello, yes the old starter would drag and it would make a sound when starting, before you change your starter, make sure the batteries are well tightened, and also the wires on the starter
My truck freightliner cascadia 2016 automatic.. The truck won't start no crank sound just giving the click normal sound when I try to fireup no check engine light showing and by the way I'm sure my truck has power but still no start . I was doing just too make sure using the battery cable to make sure charging up the truck battery for some time than try again but the truck still no start and no crank sound. not sure what's going on .
Mine also a automatic and it just happened today , I hear no noise and checked voltage it was ok , I also trying to use screw drivers to bypass ignition was only clicking..I think my starter is bad. How was yours fixed ?
Hola, una consulta.. Como puedo hacer para que el cascadia siga andando en ralenti sin limite de tiempo y no se detenga el motor,, hay alguna manera o solo es vía pc
@@TRUCKINGTIPSDIY cuando queda andando al mínimo,,, 500/600 rpm por defecto el motor se detiene a los 3 minutos,,,, como dejarlo andando sin ese límite de tiempo
Yo tengo un Freightliner Cascadia de 2009 con motor de Serie 60 y no se si será lo mismo en todos los Cascadias pero desconecta el plug de la pedal de hembrague (clutch), se te va a quedar todo el rato encendido, si quieres puedes manejar a si también pero el freno motor queda inactiva, así es como hago en el mío
If you think that he missed something and you still don’t get it what he done in this video you have no business messing with the truck, let someone else do it.
You made it look easy. It took a guy 3 hours to change the starter on my truck.
That’s how long it’s usually takes lol. Book time on replacing the starter is actually 3.5 hours.
Fearful
@@_anthonyr in others words . . Labor time/man hrs
Probably would have taken you all day that's why you hired someone 😅
Would took you 12+ hours
Men there is so many things a did with your videos thanks a lot and god bless you and keep doing videos your the best!!!!!
I will try make more videos, thank you for watching
I love how you're still Rocking Craftsman tools 😱😱😱😱😱
You are the best thing that has happen on earth
Thank you ur videos always help me out
Great video man, helps out a lot..please upload more in english
thank you sir, i will!!
Llll
Those starters are Heavy !! Great video!
Actually that starter in the video is actually lighter. Then the older starters. Like almost 30 lbs lighter
thank you !! yes it can get a little heave when getting it down
Does that plug go to the ac compressor? I had a starter and pdm replaced at my terminal and they didnt plug anything on the pdm. So i think the compresser is disconnected
Excellent video!!!👍🏾
Thank you sir 🙏
Hey I wached video your video removing starter what sockets you used stater 3 bolts took two out but I can’t remove one is tight am aslo using 16 mm for stater
Hi there, what is electrical wire that a plastic clip to undo for? I replaced my husband's starter on his freightliner and accidentally pulled it out wrong but the wires I just taped together and truck starts up fine. Great video wish I had looked it up.
I may have found what it is the thermostatic connector?
Thanks for the video.
Sorry for the dumb question,
Did you changed it because it was bad or was going bad,
And is is draggin a sign of going out, pls advise
hello, yes the old starter would drag and it would make a sound when starting, before you change your starter, make sure the batteries are well tightened, and also the wires on the starter
Thank you for sharing
thank you!!!
em cảm ơn ơn anh nhiều lắm anh ơi
Mechanic charged me 3 hours to change it. Is that reasonable price for that?
Im not sure how much they cgarge, how much did they charge you?
@TRUCKINGTIPSDIY 90$ an hour so 270 total
Used this to locate the starter so I could tap on it. Damn thing is going out and it's 33.° Should have known where it was, now I do.
My truck freightliner cascadia 2016 automatic..
The truck won't start no crank sound just giving the click normal sound when I try to fireup no check engine light showing and by the way I'm sure my truck has power but still no start .
I was doing just too make sure using the battery cable to make sure charging up the truck battery for some time than try again but the truck still no start and no crank sound.
not sure what's going on .
Mine also a automatic and it just happened today , I hear no noise and checked voltage it was ok , I also trying to use screw drivers to bypass ignition was only clicking..I think my starter is bad. How was yours fixed ?
@@chicocazador1098same here. Today. What was the solution
@qb6570 was the starter..gave no indication it was going out . It just stopped working
Thanks
Hola, una consulta.. Como puedo hacer para que el cascadia siga andando en ralenti sin limite de tiempo y no se detenga el motor,, hay alguna manera o solo es vía pc
hola, como en ralenti?
@@TRUCKINGTIPSDIY cuando queda andando al mínimo,,, 500/600 rpm por defecto el motor se detiene a los 3 minutos,,,, como dejarlo andando sin ese límite de tiempo
@@cristianberrios7799 mire este video, tiene que remover el speed sensor de la transmission
ruclips.net/video/q1gGn716wQE/видео.html
Gracias amigazo
Yo tengo un Freightliner Cascadia de 2009 con motor de Serie 60 y no se si será lo mismo en todos los Cascadias pero desconecta el plug de la pedal de hembrague (clutch), se te va a quedar todo el rato encendido, si quieres puedes manejar a si también pero el freno motor queda inactiva, así es como hago en el mío
If your intention is to show someone how remove and replace a starter, you must be willing to take your time and show all the details plz. Thxs
What did i missed?
It's just a karen don't mind her
Lol , thanks for watching Dan!!
@@Wh33lManDan 🤣😂
If you think that he missed something and you still don’t get it what he done in this video you have no business messing with the truck, let someone else do it.
How much do you usually charge for this job?
Hello, im not a mechanic, we just work on our own trucks, im not sure how much they charge, probably $150 - 200 thanks for watching sir 🙏
This a terrible video. I have no idea where you are on the truck. You just started the video peering at the starter
Its free
Thank you sir!