Quality stuff. Loved watching you have to persuade the units into their nooks because your measurements were so good. I've never had any luck with MDF, except as a dead-flat horizontal surface... maybe it's a quality issue between locations (USA here). Also, if you don't have any, I'd recommend a good brad point drill bit set for wood projects. They never drift out of your punched spot.
Thanks. We (I) don't have easy access to good quality plywood and what I can get is very expensive so MDF is the only way to go. In the video the shots of me putting the units in place are the first time and I was a bit worried they wouldn't fit but in the end they just (barely) went in.
I like it!! Never have enough storage and drawers for things! Nice pace and choice of music. My wood working videos are quite the opposite. Not onlyu did I take away a few woodworking ideas I also learned a few things about creating a good video! Nicely done! You gained me as a sub.🔨
Our house has MDF trim including skirting boards. They have not swollen in over twenty years. The kitchen had MDF toe kick, we mop the floor there regularly, no swelling. These draws were made over three years ago, no swelling. Did you just make up that two inch rule or what?
2`` was just example i used mdf on shelves in shed damp air turn them into rollercoaster over 1 year had to change them all must be diff grade@@awintheshed
All the MDF I referred to is coated or painted plus my shed doesn't get water on the floor normally. The skirting boards in our bathroom are also MDF and they are still in good condition. I also have lots of MDF offcuts on the floor in my shed leaning against the wall, some have been there for years, am using some for my current project.
Well I made these drawers over two years ago and still have not bumped into them, they are in the same condition as in the video;) No, I don't regret not having a kick board.
Quality stuff. Loved watching you have to persuade the units into their nooks because your measurements were so good. I've never had any luck with MDF, except as a dead-flat horizontal surface... maybe it's a quality issue between locations (USA here). Also, if you don't have any, I'd recommend a good brad point drill bit set for wood projects. They never drift out of your punched spot.
Thanks. We (I) don't have easy access to good quality plywood and what I can get is very expensive so MDF is the only way to go. In the video the shots of me putting the units in place are the first time and I was a bit worried they wouldn't fit but in the end they just (barely) went in.
Zen style videos are a blessing.
Thanks.
I like it!! Never have enough storage and drawers for things! Nice pace and choice of music. My wood working videos are quite the opposite. Not onlyu did I take away a few woodworking ideas I also learned a few things about creating a good video! Nicely done! You gained me as a sub.🔨
Cool:) Glad to be of service and welcome aboard.
Your precision and quality is second to none. Still planning on making the table-saw dust hood. Yours is the best I’ve seen.
Too kind, thank you:)
well done! good to see a craftsman whom extremely precise ! great work!
Thank you very much!
should keep MDF 2`` off the floor water will swell it like a sponge lovely job otherwise
Our house has MDF trim including skirting boards. They have not swollen in over twenty years. The kitchen had MDF toe kick, we mop the floor there regularly, no swelling. These draws were made over three years ago, no swelling. Did you just make up that two inch rule or what?
2`` was just example i used mdf on shelves in shed damp air turn them into rollercoaster over 1 year had to change them all must be diff grade@@awintheshed
All the MDF I referred to is coated or painted plus my shed doesn't get water on the floor normally. The skirting boards in our bathroom are also MDF and they are still in good condition. I also have lots of MDF offcuts on the floor in my shed leaning against the wall, some have been there for years, am using some for my current project.
Will you regret no having a kick board???
Stavros
Well I made these drawers over two years ago and still have not bumped into them, they are in the same condition as in the video;) No, I don't regret not having a kick board.
Looks great. 🎉
Thanks Mitch:)
Subbed! Good Job 👊🤘🏼Keep it up
Thanks for the sub!
Amazing work 😍😍
Thanks 😄
Gratulálok!!Mestermű!!
Kosonom:)
🤩🤩🤩🤩🤩🤩🤩🤩
😉