Brother,,, i live in very difficult to internet acces, and i have made many kinds off antenna 3g/4g, even i bought some antenna online but there is no one prefect antenna, finally i found this video, i have made the antenna like this one, and the result is better than all of antenna i have made before, althoug i have to make it more prefect. Might we have learn how to make antenna using MMANAGAL etc. Thanks.
Good job...I really enjoyed watching you build this antenna from scratch materials. I might use your instruction to build a more advanced and larger version from recyclables. Thanks for the awesome video.
Thanks for upload. After couple of failed attempts for making proper antenna, I am going to try as shown in this video. Hope this should work for me as well.
Hello, good video. I had a question, why clamps to fix the elements, can we fix them with longer screws and that the screws hold the elements of side A and side B? Thank you for your reply
Excellent work!..i have one doubt, what is the function of copper foil pattern on dipole side?(impedance matching??) is it possible to connect co-ax cable directly?
friend in minute 1:25 the insert that you put that is and how it is done, you have the measurements of that circuit or did you do it freehand no matter the size ??
bahut bahut dhanyawaad bhai. hum network ke liye pareshan the, antenna banaye , mast kaam kar raha hai. lekin speed 40 mbps s jyada nhi ho raha hai. koi galti kiye hain hum kya? jiofi mein sinr 6bd bata raha hai. help me
We dont have available 6mm tube here and 16 mm for bom as well, available here is 9mm for elements and 25mm for bom. Can i adjust the length of elements and the distance of each elements? Thanks in advance for your advise
+chris pethers U can modify it, but it is very complicated work to do. As the increase or decrease in measurements will affect antenna's frequency. This design can be improved. If you want to modify the structure, then you can change it according to your needs. But it might take too much time. Before making this I made 2-3 antennas but not worked properly. According to me this one is best.
If you will search in Google you will get many results, I tried many of them by calculating the measurements with online yagi calculator. And after 4 failed attempts this one worked (5th one). You can use satellite dish as a reflector but as the size of the reflector increases you will also have to increase the size of other objects. Hope it helps, any more questions, feel free to ask.
Well sometimes if thunder strikes near to the antenna it absorbs current, if not well grounded, then it may harm. And to avoid it make sure antenna is grounded properly, or your house have a lightning absorber .
I have a question- 1) Reflector diameter= 320mm and diameter of reflector=20mm. I Confused, here the reflector is the pan only. Kindly explain the two diameter you given in description. 2) Reflector distance from director 1 & from dipole is 135mm and 117mm respectively. This give another position for reflector. Kindly explain it. (If the deflector distance from dipole is 106/107mm then OK). 3) You used another circuit plate A input instead of copper foil one, I'm i wrong? Pse clarify it im just start to buid yr. antenna right now. Thanks.
Bro, you should use copper foil as it is good conductor, If u are worried where to get it, simple tear any old mobile battery, there you will get plenty of them
i was poking fun at you. keep trying, u built it well. i just realized that you used an aluminum pan when i thought it was an old satillite dish. working with whats available. good for you. look up the history of yagi antennas so can use to the best advantage. like the driven element should be issolated from the rest of rods. not able to conduct at all. and the shielding on wire to driven wont touch inner core and so on and so on. keep trying cause trial and error will give the best results. good luck
Brother,,, i live in very difficult to internet acces, and i have made many kinds off antenna 3g/4g, even i bought some antenna online but there is no one prefect antenna, finally i found this video, i have made the antenna like this one, and the result is better than all of antenna i have made before, althoug i have to make it more prefect. Might we have learn how to make antenna using MMANAGAL etc. Thanks.
THE yone
Welcome bro
Good job...I really enjoyed watching you build this antenna from scratch materials. I might use your instruction to build a more advanced and larger version from recyclables. Thanks for the awesome video.
Thanks for upload. After couple of failed attempts for making proper antenna, I am going to try as shown in this video. Hope this should work for me as well.
Hello, good video. I had a question, why clamps to fix the elements, can we fix them with longer screws and that the screws hold the elements of side A and side B? Thank you for your reply
Excellent work!..i have one doubt, what is the function of copper foil pattern on dipole side?(impedance matching??) is it possible to connect co-ax cable directly?
ANANTHASANKAR UA
As copper is a good conductor it works as amplifier,
Not tested without copper foil,
friend in minute 1:25 the insert that you put that is and how it is done, you have the measurements of that circuit
or did you do it freehand no matter the size ??
No measurements needed just cut it as a pro.
Thank you for sharing your idea, how many kilometers this antenna can recieved signal
+Virgenio Arancon
The nearest network tower is about 15 kms from my location
bahut bahut dhanyawaad bhai. hum network ke liye pareshan the, antenna banaye , mast kaam kar raha hai.
lekin speed 40 mbps s jyada nhi ho raha hai. koi galti kiye hain hum kya? jiofi mein sinr 6bd bata raha hai. help me
We dont have available 6mm tube here and 16 mm for bom as well, available here is 9mm for elements and 25mm for bom. Can i adjust the length of elements and the distance of each elements? Thanks in advance for your advise
+Virgenio Arancon
Calculate the new measurements with yahi calculator
how did you do it?
Great video. Does the arial have to be exactly as you've built it. And if so why?
+chris pethers
U can modify it, but it is very complicated work to do.
As the increase or decrease in measurements will affect antenna's frequency. This design can be improved.
If you want to modify the structure, then you can change it according to your needs. But it might take too much time.
Before making this I made 2-3 antennas but not worked properly. According to me this one is best.
How you calculate the distance, and diameter of boom to build your antenna? Can we use a satellital dish? an old tv satellital... I hope your answer.
If you will search in Google you will get many results, I tried many of them by calculating the measurements with online yagi calculator. And after 4 failed attempts this one worked (5th one). You can use satellite dish as a reflector but as the size of the reflector increases you will also have to increase the size of other objects. Hope it helps, any more questions, feel free to ask.
Old TV satellite contains pure alluminium, if you have it then it's best for this antenna.
What about the risk of lightning strike ?. What precautions we should take to avoid lightning strike possibility?.
Well sometimes if thunder strikes near to the antenna it absorbs current, if not well grounded, then it may harm. And to avoid it make sure antenna is grounded properly, or your house have a lightning absorber .
good job bro
👍👍👍👍
Tnx bro
aapne jo adopter 5;20 k aas paas bnaya h usme wire kaise connect krna h .
shubham sharma
Simple hai bhai, wire ka dono ends foil ke ends se respectively connect kr do.
Where do you get the dish? It isn't a satellital dish?
No bro it's pan lid, ( कड़ाही का ढक्कन है)
And old TV antenna
If phone case is metallic will it work? Your phone case seem to be made of plastic.
Yes it will work. If your phone has a metal case, there should be plastic also where your phone's antenna is placed.
My Redmi note 4 works well.
Circuit plate is a fiber plate which we use for PCB ... Right ??
Anu Malik
I just gave a name to it
D M X sKILLS
मैंने पूछा था कि जो सर्किट प्लेट बना रहे है वो फाइबर या प्लास्टिक पे बना सकते है ना
Anu Malik
Ha bhai koi v non conducting material pe bn skta h
I have a question- 1) Reflector diameter= 320mm and diameter of reflector=20mm. I Confused, here the reflector is the pan only. Kindly explain the two diameter you given in description.
2) Reflector distance from director 1 & from dipole is 135mm and 117mm respectively. This give another position for reflector. Kindly explain it. (If the deflector distance from dipole is 106/107mm then OK).
3) You used another circuit plate A input instead of copper foil one, I'm i wrong? Pse clarify it im just start to buid yr. antenna right now. Thanks.
1 last line is diameter of curved surface of reflector
Uttam Kumar Athokpam
Yeah you are right, I typed it wrong, but now I corrected it, Thanks
Thanks for correction.
Uttam Kumar Athokpam
Thank you too
D M X sKILLS better if directly change your note. Please
Bhai isse speed me kuch difference aayega? Mere yaha Jio ke signal proper aate hai but speed bahut hi slow.
+Shavina Rahees
Ho sakta hai, agar aap is antenna ko kisi aisi jagah rakhe jaha band4 ya band5 signal aati ho
D M X sKILLS signal band 40, band 5 and Band 3 sabke aate hai bas speed nahi aati. Just half mbps aati hai
Shavina Rahees
Agar network me hi speed nahi h to isse koi difference nahi aayegi bhai, sorry
Bro
If I use silver foil paper,
It will work ???
Mohammed Junaid
You mean aluminium foil?
Yes yes
Bro, you should use copper foil as it is good conductor,
If u are worried where to get it, simple tear any old mobile battery, there you will get plenty of them
serious question, where to buy this copper foil. just checked on amazon and price start from 475rs :( Where i can buy it in cheap price.
mixup65
No need to buy, you have to just tear any old mobile battery, and you will get it.
Wait I will post a video on that
if dr frankenstein made an antenna it would look like that
😁
i was poking fun at you. keep trying, u built it well. i just realized that you used an aluminum pan when i thought it was an old satillite dish. working with whats available. good for you. look up the history of yagi antennas so can use to the best advantage. like the driven element should be issolated from the rest of rods. not able to conduct at all. and the shielding on wire to driven wont touch inner core and so on and so on. keep trying cause trial and error will give the best results. good luck
my doubt is why need a T joint? what is the purpose?
+Ajith Kumar
So you can add more than one cellphone
Can i use copper wire instead copper foil?
wewen arwannur yes
D M X sKILLS tanks bro, i will try to make it 😂
copper foil ka se milega
Can i use other 2 pairs cable
No bro, use good quality of coaxial cable to avoid signal loss
Thanks bro
Mujhe coper foil nhi mil rhi h khi se ,, to mujhe koi alternate option btao coper foil ka
+shubham sharma
Copper foil tumhe koi v purani battery me se mil jayegi, ek video dala hua h maine, dekh lena bhai
+shubham sharma ruclips.net/video/1WRI3srl4Cg/видео.html
Sir can this homemade antenna you made can boost any cellular networks?
+Gi Gi
Yes for me this antenna covers 900 to 2300 bands
D M X sKILLS Thanks sir, this project will help our school to boost network signals!
coper foil kahase lu meri gharki market mai nehi paya
Sonai Das
ruclips.net/video/1WRI3srl4Cg/видео.html , here you can get copper foil.
Sir plz signal booster bana do with daigram/pcb layout plz plz plz
Works on frequency 1700 and 2100? BAND B4 (LTE AWS). I hope your answer.
Yes it works,
Is it work ???
Will this antenna work on 850 Mhz LTE??
Uttam Kumar Athokpam
Yes it will work
How do you plug this into your IPhone! Dumb question I know
+MrSmoothbanana
Don't plug it, just attach it to the antenna side of ur phone with rubber band. Hehe
Iss video me bol k batate too achha rhta
+vijay pandit
Ha bhai sahi bola aapne, mera first video tha isliye voice nahi dala maine.
Koi idea nahi tha na.
Thanks for sharing your opinion.
Please rewrite measurement to inches from milimeter
Bro it's complicated so mm is much better than inch
@@DMXsKILLS thanks from ur reply I have another inquiry, about the distance between the director element, are these taken from the center of the tube?
glu ka nam ka he sir
Fevi stick
Seal plese
Is nobody else gonna comment that dude is in such a rural area that he had to use I'm assuming a 20 foot pole of fkn BAMBOO and got singlal....really?