Hello friend, what material are the clamps that you screw to the central spout , is it the same if you pierce? or the bars must not be touched with the central pole
I have a question if you can solve pls. I have made a yagi antenna which i mounted on roof which capturing good signals, on other hand (receiving end) there is no antenna. So i want to know if there is any antenna that can receive the signals from yagi antenna and spread those signals to my mobile phone. I shall be very thankful to you if you solve my problem. also note, i do not want to use jiofi or any dongle. what i need is an antenna at the end which receives signals and spreads those to my mobile. Thank you.
Internet pe Kreosaan channel ka video hai about a 4g Gun. Are those guns effective? Aapki kya राय है us bare मे. I asked because, us antenna का cost काफी cheaper hai... Ye antenna का making cost बहुत jyada आ रहा hai... और aluminium pipes & hinges exact size ke market se collevt karna aur zyada difficult है.?
currently I am building a copy of this antena but i have a problem, can I use 2.5cm by 2.5 cm square aluminum bar for my boom and 8mm diameter parasitic element? thanks from philippines...t
Sir kaise pata chalega ki kitne MHz kar banana hai...mere ghar se 2 km ke Baad network aata hai but mere ghar pe nahi.... Eng translated - Sir how do we know how much MHz of antenna to be made. 2.5 km from house we get network but at my place nothing.
Agaa aap smartphone user hain toh playstore se net velocity app download kijiye aur ghar ke upar sabse unchai mein check kijiye ki kaun sa frequency sabse jyada hai.
THE TECHIE TECH sir is it possible ki main yeh Kahi se khareed saku because jab bhi main Apne village mein jaata hoon waha office ke kaam ke liye 2 km door jangle mein Jaana padta hai
You must see Balun making video by this guy. The amount of efforts he's invested in making such a small thing shows pretty much hard working guy he is.. I doubt your comment about him.
i only used new cable and some screws, i had old stock of elements. my frind printed pcb for balun. means total it cost me around 300 inr. and if purchased all materials, it will cost around 500 to 800 inr.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Can I use plastics to hold the elements
Hello friend, what material are the clamps that you screw to the central spout , is it the same if you pierce?
or the bars must not be touched with the central pole
Alluminium
Shpock FX w
Sir, What is the distance between the elements?
I have a question if you can solve pls. I have made a yagi antenna which i mounted on roof which capturing good signals, on other hand (receiving end) there is no antenna. So i want to know if there is any antenna that can receive the signals from yagi antenna and spread those signals to my mobile phone. I shall be very thankful to you if you solve my problem. also note, i do not want to use jiofi or any dongle. what i need is an antenna at the end which receives signals and spreads those to my mobile. Thank you.
You will need signal repeater booster
Internet pe Kreosaan channel ka video hai about a 4g Gun.
Are those guns effective?
Aapki kya राय है us bare मे.
I asked because, us antenna का cost काफी cheaper hai... Ye antenna का making cost बहुत jyada आ रहा hai... और aluminium pipes & hinges exact size ke market se collevt karna aur zyada difficult है.?
Wo to us antenna ko try karne par hi pata chalega bhai,
By the way thanks for commenting, such a lovely comment.
THE TECHIE TECH thank you for your reply. Sir
currently I am building a copy of this antena but i have a problem, can I use 2.5cm by 2.5 cm square aluminum bar for my boom and 8mm diameter parasitic element? thanks from philippines...t
How you made holder and clamp? It is very neat finish 👍
I will upload video about it in few days
@@THETECHIETECH Thanks 👍
How size long dipole sir?
Exelent hig ganancia!!!!!!!
is there any antenna for 3500mhz?
Sir what is the advantages of using 50 ohm balun amplifier on this yagi antenna
Avoids signal loss, easy to connect cables, good looks etc.
Can you share diagram and calculation
how can exact 50ohm pcb design
Hi sir, how to know where Jio tower near my house is? Also, will longer length of coax cable cause signal loss?
Sir kaise pata chalega ki kitne MHz kar banana hai...mere ghar se 2 km ke Baad network aata hai but mere ghar pe nahi....
Eng translated - Sir how do we know how much MHz of antenna to be made. 2.5 km from house we get network but at my place nothing.
Agaa aap smartphone user hain toh playstore se net velocity app download kijiye aur ghar ke upar sabse unchai mein check kijiye ki kaun sa frequency sabse jyada hai.
THE TECHIE TECH sir is it possible ki main yeh Kahi se khareed saku because jab bhi main Apne village mein jaata hoon waha office ke kaam ke liye 2 km door jangle mein Jaana padta hai
THE TECHIE TECH thank you for a quick reply...I am going to subscribe your channel now.
Online milta hai, par ye model nahi milega. Ye made in village hai😊
Thanks for uploading
Lage raho Deepak bhai
What's the name of 6mm element. Like when I go to shop what do I say to the shop keeper for the element
Why no new videos sir
nice
I want to purchase. From you. Antenna
Is that possible pls replye
Can you make one me . Let me know the price I am interested to buy 2 piece
Join our whatsapp group from link given on channel about page
Can you please send one pcs , have you started taking orders
How to now/find which is bandwidth/mhz is in my area, please let me know
Yse net velocity app
Nice
Thanks, keep supporting us.
He just disasembled his existing antena and demo us how to put it back 😂
Yeah right
You must see Balun making video by this guy.
The amount of efforts he's invested in making such a small thing shows pretty much hard working guy he is..
I doubt your comment about him.
balun kaha Milega sir pleace bataye
Channel mein video dala hua hai
How much it cost
i only used new cable and some screws, i had old stock of elements. my frind printed pcb for balun. means total it cost me around 300 inr. and if purchased all materials, it will cost around 500 to 800 inr.
Can You make one for me
Unfortunately, we havent started taking orders yet. But we are thinking to start it soon. We will start taking orders after sufficient orders.
Okay sir
THE TECHIE TECH beware of selling this to anyone, I ordered 1st :D
where do I order the parts from?
Online available in aliexpress.com
I cannot understand how this design can work! The elements need to be electrically isolated from the boom!
Otherwise they will not function correctly
i will use your design. if you reply i will post a picture for your channel.
This is not working waste