Thanks from me as well Sam, good work and info. Hope you recover without any negativ sides back to your normal health standard. Following you on insta as well.
Sam thanks so much for the detailed vid and coming on board! Following up on the difference between the Standard, and High Flow pickups. In addition to the larger inlet opening, the tube itself has porting on the inlet side, and the flange that meets the block has additional CNC port matching. These changes make it the highest flowing pickup currently available :) If there's anything else we can do, please don't hesitate to reach out to us! Thanks again!
With the high flow pickup, is there any recommendations on what oil pump size to pair it up with? OEM, JDM, OEM ported and polished. This is for a time attack setup with high lat g-load.
Didn't realise you got Covid dude, glad you got through it! Super stoaked you've got Killer B as a sponcer!!! I hope the parts preform as well as there made, I was blownaway by the quality and lightness. Can't wait to get my bits on too
G'day mate, been following your IG for a while but only just found your YT so I've gone back through and watched everything. Great channel and I love all your videos. You seem to be wired very similar to me in the way you like to fully understand and explain issues, rather than just try something and move on in hope - do it once, do it right! Hope you make a full recovery and looking forward to the next race season. Cheers
If you got advice of some of the best that means you have been accepted as a serious driver/fabricator and a general nice guy 👍 good luck next season brother 🙏
Another informative and clear Video Sam, clear explanation and deciphering of the product. This looks well thought through and deep enough to swim in. No oil escaping that central chamber when you corner for sure. Glad you are better which is the main thing!! 💪🏼👍🏽
Personal question Sam did you have the vaccines? I'm on the fence about them but seeing a personal story it may prompt me to get them all. Glad your on the mend. Cheers
Hiya mate, so I have a huge needle phobia so I wasn’t vaccinated. I’d plucked the courage up and I was actually booked in to be vaccinate (after having to re register at my gp, long story) the week after I fell ill with covid 🤦🏻♂️ I have to wait 28 days now until I can have my vaccine but I will absolutely be getting them. My girlfriend has worked very closely throughout this pandemic with covid patients (she’s a respiratory nurse) so I hear on a daily basis the horrors that this virus is bringing. I would highly recommend getting the vaccine, everything has side effects but the positives completely out way any negatives. Not to preach but the week I caught covid, 6 of us went out on the Friday night, 3 out of 6 were vaccinated and boostered, being in direct contact with myself, they all haven’t caught the virus, yet the other 3 of us all caught it, in addition to this my housemate (also unvaccinated) also caught it. That speaks volumes for the vaccine.
Hi mr sam thank you for the video. My question is about your thoughts on the longevity/durability of the hnbr flaps. Ive seen studies that show prolonged exposure to harsh environments can lead to change in the elastomer properties, where the hnbr gain hardness overtime. I wonder if this is something to worry about for those wanting to run this pan for a long period of time. Thanks for the video!
Hiya mate, so I can’t speak really on the longevity of the flaps. In the fairly short period I’ve had dealings with them they’ve remained pliable and flexible. Perhaps for the cost of them maybe look at them being a serviceable item? I’m sure killer b will be able to advise better though, they’re a good team of guys if you drop them an email I’m sure they’ll help 🤘
Looks like a bloody well made bit of kit long live the EJ
Thanks from me as well Sam, good work and info. Hope you recover without any negativ sides back to your normal health standard. Following you on insta as well.
Sam thanks so much for the detailed vid and coming on board! Following up on the difference between the Standard, and High Flow pickups. In addition to the larger inlet opening, the tube itself has porting on the inlet side, and the flange that meets the block has additional CNC port matching. These changes make it the highest flowing pickup currently available :) If there's anything else we can do, please don't hesitate to reach out to us! Thanks again!
With the high flow pickup, is there any recommendations on what oil pump size to pair it up with? OEM, JDM, OEM ported and polished. This is for a time attack setup with high lat g-load.
Thankyou mate, apologies for the wrong info regarding the Air Force 😂 I’ll blame the covid, slight brain fart there 😅
@@recklessactn Always the OEM pump size that came on that engine. The OEM Suby oil pumps have a LOT of excess capacity!
Didn't realise you got Covid dude, glad you got through it! Super stoaked you've got Killer B as a sponcer!!! I hope the parts preform as well as there made, I was blownaway by the quality and lightness. Can't wait to get my bits on too
G'day mate, been following your IG for a while but only just found your YT so I've gone back through and watched everything. Great channel and I love all your videos. You seem to be wired very similar to me in the way you like to fully understand and explain issues, rather than just try something and move on in hope - do it once, do it right! Hope you make a full recovery and looking forward to the next race season. Cheers
Thankyou mate, appreciate the support and I hope you find some of the videos helpful 👌
If you got advice of some of the best that means you have been accepted as a serious driver/fabricator and a general nice guy 👍 good luck next season brother 🙏
Thankyou mate, appreciated 💪
Another informative and clear Video Sam, clear explanation and deciphering of the product. This looks well thought through and deep enough to swim in. No oil escaping that central chamber when you corner for sure. Glad you are better which is the main thing!! 💪🏼👍🏽
Personal question Sam did you have the vaccines? I'm on the fence about them but seeing a personal story it may prompt me to get them all. Glad your on the mend. Cheers
Hiya mate, so I have a huge needle phobia so I wasn’t vaccinated. I’d plucked the courage up and I was actually booked in to be vaccinate (after having to re register at my gp, long story) the week after I fell ill with covid 🤦🏻♂️
I have to wait 28 days now until I can have my vaccine but I will absolutely be getting them.
My girlfriend has worked very closely throughout this pandemic with covid patients (she’s a respiratory nurse) so I hear on a daily basis the horrors that this virus is bringing. I would highly recommend getting the vaccine, everything has side effects but the positives completely out way any negatives.
Not to preach but the week I caught covid, 6 of us went out on the Friday night, 3 out of 6 were vaccinated and boostered, being in direct contact with myself, they all haven’t caught the virus, yet the other 3 of us all caught it, in addition to this my housemate (also unvaccinated) also caught it. That speaks volumes for the vaccine.
Hi mr sam thank you for the video. My question is about your thoughts on the longevity/durability of the hnbr flaps. Ive seen studies that show prolonged exposure to harsh environments can lead to change in the elastomer properties, where the hnbr gain hardness overtime. I wonder if this is something to worry about for those wanting to run this pan for a long period of time. Thanks for the video!
Hiya mate, so I can’t speak really on the longevity of the flaps. In the fairly short period I’ve had dealings with them they’ve remained pliable and flexible. Perhaps for the cost of them maybe look at them being a serviceable item? I’m sure killer b will be able to advise better though, they’re a good team of guys if you drop them an email I’m sure they’ll help 🤘
Wow awesome video
Great to see you chatting on your favourite subject after your time out😢
Well done as I know it’s a massive effort to just talk ❤️x