This has been the best assembly video I’ve seen. Great job! I’m hoping to build a similar single yoke set-up but still trying to decide on which computer and monitor to get. If you have any suggestions let me know.
Thank you so much for the feedback! I would suggest a couple of things. First off I would get a tv maybe 2k or 4K it honestly doesn’t matter the resolution but I would get about a 36” tv. After that try to hang it up or mount it on a wall so it is over the panel. The panel clamps to a desk so also find a desk that can withstand heavy weight. Lastly find a motherboard that goes in a computer that has a lot of USB ports. You will most likely need to buy a usb hub for more port storage but the more ports on the motherboard, the better off you will be. Sorry if some of this doesn’t make any sense, if you have anymore questions feel free to reply!
Hey, very good video. I found just the info I was looking for. 🙏 thanks for sharing. I think 🤔 I’ll just go ahead and follow you and see if you have anything else to teach me.Thanks again!
Great video. 😀 Thanks for making it. I'm curious - when you turn or push on one of the yokes does the other yoke move in sync with it, or does it just sit there motionless ? Thanks again !!!
Thanks! So when you move one of the yokes the other one is motionless. You can move both yokes at the same time, but only one of them will cause an input. I hope that helps!
The only problem I had was when I bought one of these flight velocity boards it was way!! To big for my desk like height wise so I would take that into consideration furst
@@SAnderton5 sorry for the late response, if you are using spad.next, be sure to go to the notification page and download the drivers necessary for the instruments. I think they are call FIP Drivers or something like that. If you are only using the Logitech drivers, then it should automatically work. Just be sure to download the necessary drivers.
dang i have similar but just 1 yoke bht the rest is legit the same but its pretty cool since one can be the pilot and the other kne the co pilot nice setup overall
I'm curious as to whether the second yoke is active because FS doesn't like multiple inputs for the flight axes from different controllers with different settings. You'll have one yoke giving elevator input for example, while the other could be doing the opposite. I can't see how that will work.
Great question, both yokes can give inputs on fs2020(not at the same time). We usually just take turns flying, because both of us can’t give inputs together. Although you can fly with a yoke, press buttons on the AP panel and use rudder pedals at the same time, you just can’t use 2 elevators/ailerons at the same time.
No, Logitech makes the yoke and instruments, but the panel is from a company called flight velocity. Everything is sold separately if you do it the way we did, building it. But you can buy It premade with the panel, but it does cost more than just building it yourself.
Great video! My setup is exactly like yours I am having a problem with getting everything to work. I would like to get your suggestions on how to make my FIPS work at the same time my radio panels need to work. How can I contact you guys to perhaps get a little assistance? I will send you pictures of my setup. Thanks!
Yes we had the very same problem, first off you can contact us at ttvalphazulu737@gmail.com But to try to answer your questions, I would suggest getting spad.next which is a 3rd party website that has FIPS to use. You will find instructions on that website that will guide you to the rest. It should explain that you need to download the Logitech drivers necessary. These drivers are found on Logitech g website. The bad part about spad.next is, it costs money, it’s not too expensive though. You can get a free trial to test it out. If you still have issues, contact us on our email and we will gladly help out! Thanks for the comment!
So sorry for the late reply, we bought all of these separately, but you can buy a complete set that costs a bit more off of the flight velocity website
Yes, both yokes work on any plane sim. We mainly play msfs and fsx so we have not tried it for x plane, but I’m sure it would work there too! You need to download the proper drivers from Logitech’s website, and I would suggest getting spad.next these websites and links allow you to connect your sim. I must say, the connection to the sim was a lot of trial and error, so have patience and try different things.
Yeah so the “radio panel” we put in the middle can be doubled as a squak code. So the top panel we usually use as radio frequencies and the bottom is for squak
Are you using this setup for 737 primarily or flying a variety of aircraft? My interest is in the 737 but am trying to learn to fly starting off with a lesser aircraft first. And you panel appears it would be useful for the Cessna all the way up to a 737. Thanks.
Yes we have used this anywhere from a Cessna to a 737 to an A380, although flying an airbus with yokes is quite weird 😂 but yes it works with everything
Thanks for the reply. One nice part of the frame you all used is that it has an opening for the big box that the yoke is attached to. In my present setup the yoke and box sits on a desk and is too high and I am too far away from my 32 inch monitor due to the length of the box.
Hey guys I would like to know where I can find the plate that attach the Logitech G (Saitek) Flight Simulator Yoke to the Flight Velocity FV3D - Dual Yoke Mid Profile Cockpit Panel - Logitech G Pro Flight and Saitek
True, although we had to get another hub for the 6 pack, and the usb 2.0 hub was less expensive than the 3.0 and since the 6 pack was 2.0 we decided to get that
Sorry for the late response, the panel is on the desk with the help of clamps, those clamps can be unscrewed to move the panel, so no it’s not permanent
@@alphazulu7372 thx so much ill probably just purchase one from flight velocity because i think ill fuck something up also do you have to bind everything or does it do that automatically
@@GavFlys idk how prebuilt work, also i doubt the honey comb yoke fits, but you can always try. You can buy an add on trim wheel, but the Logitech AP panel comes with one.
@@GavFlys after some research, I found that some of the prebuilt flight velocity panels already come with honeycomb yokes, so nvm I guess you can use honeycomb, also some boards come with 2 slots for throttle so that way you can use 1 slot for throttle mixture etc. And one for the trim wheel
Nice vid! Instead of buying a bunch of instrument panels, I bought 10x $50 mini monitors for instruments
Negawaaaaatt negawaaaaaaaaatt negawaaaaaaaaatt.
I am brand new, this helped
+respect for not pushing the video a extra 8 seconds
Y'all gonna have 100000 views, showed up in my recommended videos
🤞🏻Hopefully, thank for watching and commenting!
This has been the best assembly video I’ve seen. Great job! I’m hoping to build a similar single yoke set-up but still trying to decide on which computer and monitor to get. If you have any suggestions let me know.
Thank you so much for the feedback! I would suggest a couple of things. First off I would get a tv maybe 2k or 4K it honestly doesn’t matter the resolution but I would get about a 36” tv. After that try to hang it up or mount it on a wall so it is over the panel. The panel clamps to a desk so also find a desk that can withstand heavy weight. Lastly find a motherboard that goes in a computer that has a lot of USB ports. You will most likely need to buy a usb hub for more port storage but the more ports on the motherboard, the better off you will be. Sorry if some of this doesn’t make any sense, if you have anymore questions feel free to reply!
You guys are amazing! Best panel installation video I’ve ever seen! 👍🏾👍🏾👍🏾
Thanks!
Nice 6 pack
Thanks!
well done guys! good video.. good work
Outstanding Alpha Zulu. Thank you for the break down!
Thank you so much for watching!
IM THE 100TH SUBSCRIBER LETS GOOOOO
Thank you soooo much!😁😁😁
dang looks sick i have a stick and want to use a yoke and this setup is fire great work !!
Nice video boys! Enjoy the game.
Nice setup bro
Great work, thanks for showing. Have a nice flight.
Thanks 😁
Great vidéo boys keep it up
You found it!
Best vid I have seen and I think I have seen all of them 😂😂
Thanks for watching!😁
I got all of that and realy enjoy these controls.
Hey, very good video. I found just the info I was looking for. 🙏 thanks for sharing. I think 🤔 I’ll just go ahead and follow you and see if you have anything else to teach me.Thanks again!
Thanks, you can also find our email in the bio if you have any other questions! Thanks for watching!
I want to get this so bad lol
Cool maybe more chill music tho
Lol will do, thanks for watching!
Great video. 😀 Thanks for making it.
I'm curious - when you turn or push on one of the yokes does the other yoke move in sync with it, or does it just sit there motionless ?
Thanks again !!!
Thanks! So when you move one of the yokes the other one is motionless. You can move both yokes at the same time, but only one of them will cause an input. I hope that helps!
The only problem I had was when I bought one of these flight velocity boards it was way!! To big for my desk like height wise so I would take that into consideration furst
So help me figure out how you attached it to the table?? I only got a panel and some screws. All instruments are on back order...
So the yoke has a clamp to it (which clamps to the table), without the yoke it would be very difficult to keep the panel on the table
@@ethanhathcock_ yes exactly, the yoke will connect to the table or whatever you decide to clamp the yoke to.
Hey guys, our flight instrument panels glow but they do not work. Any idea how to get them to work?? I’m so frustrated!!
@@SAnderton5 sorry for the late response, if you are using spad.next, be sure to go to the notification page and download the drivers necessary for the instruments. I think they are call FIP Drivers or something like that. If you are only using the Logitech drivers, then it should automatically work. Just be sure to download the necessary drivers.
dang i have similar but just 1 yoke bht the rest is legit the same but its pretty cool since one can be the pilot and the other kne the co pilot nice setup overall
very good
I'm curious as to whether the second yoke is active because FS doesn't like multiple inputs for the flight axes from different controllers with different settings. You'll have one yoke giving elevator input for example, while the other could be doing the opposite. I can't see how that will work.
Great question, both yokes can give inputs on fs2020(not at the same time). We usually just take turns flying, because both of us can’t give inputs together. Although you can fly with a yoke, press buttons on the AP panel and use rudder pedals at the same time, you just can’t use 2 elevators/ailerons at the same time.
Very nice does the yoke and etc come with the panel?
No, Logitech makes the yoke and instruments, but the panel is from a company called flight velocity. Everything is sold separately if you do it the way we did, building it. But you can buy It premade with the panel, but it does cost more than just building it yourself.
@@alphazulu7372 oh yeah no problem I don’t mind paying money for it lol
@@alphazulu7372 thanks bro figured it out talking to the people today that owns it
@@sorrowhd9018 sorry for the late response, but GREAT!!!!
@@ethanhathcock_ oh no I already have every single piece of that gear just order from Amazon thanks doe
Great video! My setup is exactly like yours I am having a problem with getting everything to work. I would like to get your suggestions on how to make my FIPS work at the same time my radio panels need to work. How can I contact you guys to perhaps get a little assistance? I will send you pictures of my setup. Thanks!
Yes we had the very same problem, first off you can contact us at ttvalphazulu737@gmail.com
But to try to answer your questions, I would suggest getting spad.next which is a 3rd party website that has FIPS to use. You will find instructions on that website that will guide you to the rest. It should explain that you need to download the Logitech drivers necessary. These drivers are found on Logitech g website. The bad part about spad.next is, it costs money, it’s not too expensive though. You can get a free trial to test it out. If you still have issues, contact us on our email and we will gladly help out! Thanks for the comment!
You need to use USB 2.0 port ; get a powered 4 amp + hub with 2.0 ports
So did you buy all of these thing separately or did they all come in a kit
So sorry for the late reply, we bought all of these separately, but you can buy a complete set that costs a bit more off of the flight velocity website
@@alphazulu7372 alright, thanks!
how big is your screen?
My question is, does both yokes work and if yes how can I do to make them work on mine, tanks.
Yes, both yokes work on any plane sim. We mainly play msfs and fsx so we have not tried it for x plane, but I’m sure it would work there too! You need to download the proper drivers from Logitech’s website, and I would suggest getting spad.next these websites and links allow you to connect your sim. I must say, the connection to the sim was a lot of trial and error, so have patience and try different things.
Tanks for answering my cuestión I have X plane 11 and will let you know when I get both yokes working
How much did the mount cost?
Around $2000 USD. Although only a singular yoke panel (which you can also make) is only around $1500 USD
No it’s about $2300
With single yoke
@@alphazulu7372 only the panel also because I already have the command how much does the flight velocity panek cost?
@@plane_spotter_italy for just the panel, you can find it on flight velocity website, they all cost different amounts
do any of the devices work for the transponder and setting squak codes etc?
Yeah so the “radio panel” we put in the middle can be doubled as a squak code. So the top panel we usually use as radio frequencies and the bottom is for squak
Maybe a stupid question but... why 2 radio panels?
Pls tell me the price of the whole setup
It is around $2000 USD right now. We got it about 4-5 months ago and it was about $300 cheaper. So maybe in the future it will be less expensive.
12k views damn great job guys
Are you using this setup for 737 primarily or flying a variety of aircraft? My interest is in the 737 but am trying to learn to fly starting off with a lesser aircraft first. And you panel appears it would be useful for the Cessna all the way up to a 737. Thanks.
Yes we have used this anywhere from a Cessna to a 737 to an A380, although flying an airbus with yokes is quite weird 😂 but yes it works with everything
Thanks for the reply. One nice part of the frame you all used is that it has an opening for the big box that the yoke is attached to. In my present setup the yoke and box sits on a desk and is too high and I am too far away from my 32 inch monitor due to the length of the box.
Hey guys I would like to know where I can find the plate that attach the Logitech G (Saitek) Flight Simulator Yoke to the Flight Velocity FV3D - Dual Yoke Mid Profile Cockpit Panel - Logitech G Pro Flight and Saitek
Hello! The plate should come with the flight velocity panel.
could tell you where to buy a frame for avionics installations
i wish i had setup like you me and my younger brother wouldve had so much fun i wish fot someone to send me this kind of setup :(((
Do both of the Logitech yokes work at the same time?
USB 3.0 hub are backwards compatible. You did not need USB 2.0
True, although we had to get another hub for the 6 pack, and the usb 2.0 hub was less expensive than the 3.0 and since the 6 pack was 2.0 we decided to get that
Do you have to buy 6 individual Logitech Instrument Panels or does making 1 purchase come with a few?
We had to buy each individual Logitech instrument panel
did you purchase it with iPad or gauges
We purchased gauges
can you show how to use them
Once you out it on the desk is it permanent
Sorry for the late response, the panel is on the desk with the help of clamps, those clamps can be unscrewed to move the panel, so no it’s not permanent
not found in France 😢
first thing you will need is a wallet the size of Shaquille O'Neal
I'm new to flight simulators. Why the need for two flight radio panels?
I have the same question. Is dual flight radio needed for bigger planes like B737 or A380?
or something a little bespoke MSFS Flight Simulator Cockpit (add Your Own Saitek Fip Radio Switch Xbox and PC) | eBay
So you spend over 2 grand on it but cant get a decent monitor?
does all this work with microsoft flight sim 2020 or just x plane 11
It works for x-plane, msfs, prepar3d, and fsx
@@alphazulu7372 thx so much ill probably just purchase one from flight velocity because i think ill fuck something up also do you have to bind everything or does it do that automatically
@@alphazulu7372 also do you know if you could put a honeycomb yoke instead also is it possible to put a trim wheel next to the throttle
@@GavFlys idk how prebuilt work, also i doubt the honey comb yoke fits, but you can always try. You can buy an add on trim wheel, but the Logitech AP panel comes with one.
@@GavFlys after some research, I found that some of the prebuilt flight velocity panels already come with honeycomb yokes, so nvm I guess you can use honeycomb, also some boards come with 2 slots for throttle so that way you can use 1 slot for throttle mixture etc. And one for the trim wheel
Pogs
Dose your parents know you took there money? 😂😂
step 1: have thousands of dollars
Lmao I guess so lol but it took months to get everything, we just saved up alot
@@alphazulu7372 Good job hard work pays off haha im getting my logitech multi panel saturday, i have 2 throttles and a yoke so far
@@Exotixx Awesome!!!!!
Dual yoke for nothing, ussless.