YAMAHA Receiver How to hook up home theater speakers wire
HTML-код
- Опубликовано: 14 фев 2014
- Get these banana plugs for hooking up wires→ amzn.to/2xA13Qs
Most people still don't hook up the presence or surround back speakers. In the next video, I show what the other ports are for. 
Хобби
![Rob49 - On Dat Money (with Cardi B) [Official Video]](http://i.ytimg.com/vi/fTFS58mHJh8/mqdefault.jpg)
Thank you very much for the video. I have been having an issue with sound. For some reason some of my TV channels have no sound, the sound on some of them goes up and down and is sometimes muffled. Other channels seem fine. I have just fixed the wires of my surround sound system by fixing them back into place (thanks to your video) but the problem hasn't gone away. Furthermore, when I turn on Roku, there is no sound either. Do you have any recommendations? Thank you.
Thank you! I was really struggling figuring out where to put the wires and which ones I need it and it all clicked in my head while I was watching this video.
Natural Sound av Reciever HTR-5660 hooking up
what is the difference between the flip up and down speaker wire connecter and the screw/banana connector? my amp has both kinds also...just wondering why all the connectors are not the same..seems like the flip ones are easier and take up less room.
Is there a 7.1 speakers-receiver system with bluetooth and the remote control which has 2.0, 2.1, 3.1, 5.1, and 7.1 buttons for witching to any sound channels at will to play movies or music for home?
Can my subwoofer be hooked up to receiver by wires only? Cuz the subwoofer mother board don't work and I just want bass
I have a blu ray player at home. Still have the old speakers from the old blu ray. One front speaker. Two back speakers and a subwoofer. Do I still need an AVR receiver for surround sound? And what else would I need?
im using 10awg and its a struggle to get them in can you split the ends in 2 so it fits around the ring plate better ..currently twisted into one strand but not fully connected round the ring plate in the binder....( binder leans because of this )
Thanks for the tutorial. What Do you recommend a good price home theater system (value to money)
Thanks
I've got a sony it says for the rear 6.1 I .can plug into the rears do I plug one end to the negative on the left and the piste on the right of the other? .mines a 5 .2 6.2 7.2 and 7.2 high (2 speaker go high up for vertical sounds. They all go in the same 2 connections. So it's stumped me with just the rear which only has 2 wires to go into 4 inputs
Nice video very helpful. I have Yamaha rx-v385 and bose acoustimass 5 series v. My connection was only on the front speakers on the receiver because my speaker is not powered. My question is can I also add a powered sub to my receiver.
How do you know which speakers to use? Do they just need to have the right impedance? I have some real dinky speakers with much thinner wire lying around
If you have all ten speakers hooked up what would you put your receiver on for all of them to work?
Is it possible to hook up four 3 way speakers with 10" subs to one receiver and make them play together?
lol this was helpful. thanks. never used a receiver with that type connectors for speaker wire
I just picked up two Klipsch floorstanding speakers to add to my 6 speaker home theater system but I'm getting no sound from them. Older Yamaha HTR 5590 receiver that has capability for 4 front speakers but I'm thinking I must be doing something wrong, and can't figure it out.
i have acoustic response series 707 but i dont know how to use them 'do i get a mixer and connect them through wires then mixer to my laptop? i'm really lost please help :(
Thank you so very much. This is just what I needed.
I'm getting a buzzing sound from the speakers after connecting them up. Do you know why or how to fix that?
Question: Does my TSR-7850 support wireless bluetooth speakers and if so, how do I pair them?
Hey guys I need some help. My surround receiver outputs around 100watts at 6ohms, however, my speakers are 4ohms. I know my receiver will get warm as the speakers are a lower ohm than the recommended 6ohms of the receiver. But will the receiver still put out 100watts even though its running a 4ohm speaker. Or, would t to be better to wire the 2 speaker in parallel to get a 8ohm load, however i'll be massively under powering the speakers. Thanks
Do you know how I would set up a Yamaha a-s501 amp to a wireless network? I want to play music by using my phone to connect to my network hard drive. The amp has a digital and optical output. Thank for any help.
I have a question, I have hooked up the speaker wire the way you advised and I put the other side into the speakers, but it’s not playing? I haven’t hooked this up in about 5 years. The system still works, the display screen still works, my Dj system is still showing that the cd is turning and playing the songs, it’s just that nothing is playing through the speakers or the home theater system which is brand new. What can I do?!
I hooked raw wire into speaker hole connectors and worked. Or should I get banana connectors instead?
I have a dsp ax759se Yamaha, should I bi wire with front a and b?
So I got a Logitech Z906 sound system, and what I wanna do is connect on this sound system 2 other speakers (rca) to my main mixer (Behringer Xenyx) so I can play music through all of them...How Am I supposed to do that?
Hi. I have a a Yamaha HTR 6295 to which I want to connect to my two Mission speakers. I’m not sure why I can’t get sound. I’ve connected the wires, one set to the front speakers and one set to the centre speakers on the receiver. Nothing. I triple checked the positive and negative connections. The wires are pretty thick not sure of their gage. They have always worked okay previously. Any help would be appreciated. Thanks!
I have a Yamaha RX-V670 and wondering what ohm and wattage speakers would be best for front B channel speakers ? Is the output for B channel the same as A channel ?
Can a second receiver with a subwoofer line out be hooked up to the first receivers subwoofer line out and have a third receiver hooked up to the subwoofer line out on the second receiver
thank you. I was trying to put the raw wires in the hole and that wasn't working AT ALL!
hello, I hope you are in good condition, I have a yamaha dsp a 2070 amplifier, if the center speaker produces bass, or midle, or treble sound, what size should we use for the center speaker for the yamaha dsp a2070 amplifier.. thank you, good luck.
Great demonstration but I cant find the holes on my receiver speaker terminals they are that small.(Yamaha receiver RXS600)
I just had a look at the user manual for your amp, the speaker terminals are basically the same, just expose about 10mm of wire, twist it and insert the wire, make sure you unscrew the terminal first.
i have some speaker with rca input and inbuilt amplifier, can i hook them to rca out of this receiver while all sp speakers are also connected to wires , will both speaker work simultanously??? thnaks in advance
Thank you for the video on the Yamaha AV Receiver!!! Great instruction!!!
I have Yamaha HTR5660 with tower Yamaha NS555 running speakers A to highs and speakers B to lows. What if i just split speakers A highs n lows to 1 tower and speakers B highs n lows to other tower?
I'm using heavy gauge 6ft wires to each which seem to sound better with more power or volume than when I tried connecting banana plugs, which I removed to use only bare wire again.
And i wonder what if i left the bridge on and ran same way using speakers A&B, would that be like using double power?
Do you need to solder banana plugs? The speakers wires I have a very think and I don't think they will fit into the holes behind the red and black twisting connectors.
Some banana jacks need soldering, some don't.
i have a pioneer vsx 7500s the problem is that it plays only from left input
it outputs left from both A B And Left Right (Main)
please help me
I had buy this yahama speaker wif yamaha receiver. Wanna know, should i buy the hi-end wire to connect the speaker to get best sound or else just using the wire which yamaha provided is enough ya? Thanks
hi i am about to purchase a yamaha Rx-v573 reciever i need some suggestions on what brand of speakers that would complement this model please include a10" powered sub . thanks
where should i connect an rca to 3.5 mm jack? my bass speaker works when on the radio, but my bass speaker doesnt work when i install the white and yellow rca to 3.5 mm jack and plug a phone in, i lose the bass... any advice?
Very helpful. Thank you.--Colin
Thank you! You made it so simple for me to set up my speakers to the stereo.
i dont mean to be so offtopic but does anyone know a trick to log back into an Instagram account??
I was stupid lost the login password. I appreciate any assistance you can offer me!
@Alec Anson instablaster =)
@Barrett Frederick I really appreciate your reply. I got to the site through google and im trying it out atm.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Barrett Frederick It did the trick and I now got access to my account again. I'm so happy!
Thank you so much you really help me out !
@Alec Anson you are welcome :D
Hello, can you put two subwoofer on that team? I see that you have two outings for subwoofer?
I have got the ax1 amp, will the Samsung be BD-F7500 connect better with analogue 7.1, or optical? thanks kirsti
Optical
Hi I'm trying to connect my iPod to our stereo at work, I'm currently using an aux cable one end to the iPod and the other to a DVD audio hole, but it'll only play on 4 out of the 6 speakers, so it sounds unbalance, I tried using a different wire, I don't know what it's called but one end goes in the iPod and the other two ends are red and white, but when I connect those I get no sound at all even though everything is a perfect fit, I even tried plugging it in through diff holes, what am I doing wrong? :( please help
Hello
I have the Yamaha RX V861 7.1 - i want to hook up just 2 sets of 150w @ 8 ohms speakers to listen to my turntable ( Rega Planar 3). What would best way to set this up to get the best sound from my speakers and turntable.
Thank you for your time.
Simply plug your turntable into the "Phono" RCA jacks on the back of your amp, connect your speakers in the normal way, because you'll be playing records, I don't think you'll get audio from your rear speakers, you might though, if you choose a surround effect.
What about a 4 conductor wire? Do I need an expensive reciever?
I have the yamaha - HTR-5950. I set up my 5 speakers and subwoofer in the right place but for some reason my front speakers are playing the noise that's supposed to be the back ones during a test(they tested properly for front but then the sound came from the front ones again when they were testing the back). My back speakers still have sound coming from them, I'm just baffled as to why the front ones are activated when testing the back. Every speaker is part of the original package.
Hi. Is there anyway of extending the inferred? Mine is going in to a cupboard so need to extend the ir to the outside of cupboard? Thanks.
Thanks, helped attach wires to my Yamaha receiver, was perplexed
How do I set up UE Megaboom with yamaha tsr 7810?
Any ideas on why my Yamaha RX-V1800 shuts down after playing about 3 to 5 minutes? It gives the error to check the speaker wires. It has been hooked up about 3 years. Thanks so much
THANKS BRO HUGE HELP, THANKS AGAIN
Hi, Do you have the firmware of the RX-V450?
In my Yamaha I don't get sound from my front speaker only the Front L and also my Surround R doesn't work please help
Can av receivers handle 4 ohm speakers
EXCELLENT I understood everything, now I can sort my set up with confidence, THANK YOU VERY MUCH.
Hi a VERY informative videos thank you I learned from your video. I am 63 so I know EVERTHING. I have a Yamaha Aventage System cost around 500 English pounds When I first got the amp I have a 5 speaker set up Got everything wired up and OMG it made my legs VIBRATE it is was that good HOWEVER after a ROOM change and a new connect all the wires session I set up my system for the second time It was good but at HIGH volume it would just switch itself off. THIS REALLY got me seriously annoyed I spent hours thinking my DIGITAL EXPENSIVE AMP could not take high volumes and IT SWICHED ITSSELF OF to save ITSSELF from destruction ANYWAY months later all I had done was wire 1 rear speaker positive negative the wrong way round PROBLEM solved As I said I KNOW EVERTHING So it could NOT possibly be MY FAULT well it WAS So a word to the wise it probably is your fault and don't forgot to plug via the internet the Ethernet lead into your amp to get the latest software updates for your amp. At 63 I DONT KNOW EVERYTHING lol Regards Dave
How do I work the Air Play feature
can you please tell me if it is possible to convert the yamaha htr 5730 AV receiver with a bluetooth adaptor (Logitech) and where to connect th input cable from bluetooth adaptor
my old subwoofer has the same 2 cables like your speakers, how can i connect it to such a reciever ?
you could look for a "Coaxial to RCA" cable
I usually don't click on affiliate links but I was happy to this time. Thank you :)
thank you! great video!
I have a Yamaha RXV 1050 model amplifier kindly let me know about the features and usage in details please?
Very interesting I understood all of the information, now part two.
Nice video man! hey, one of my speakers sounds great! The other, I can hardly hear it. What could be wrong?!
Thank you for the good information.
Where would I hoook up my subwoofers if their not powered. I have 5 double stacked redline surround sound Bose. With 2 am-500 subwoofers. On a Yamaha rx-v657
Hi i was wondering if u can help i have a htr 5660 and the remote wont connect to the amp at all. I really just wanna control the volume. Batteries are new. Thank yoi
You may have a problem with your remote, get your phone camera and turn on the selfie camera, point your remote at your phone and start pressing buttons, if you don't see the remote LED light up in your phone screen, that could mean that your remote is dead, the remote might also need cleaning inside.
I know this videos is old, but hoping to get a reply. I have the same receiver, I have connected my front left and right, and my center. But Once I have my receiver set up either the center sounds more loud than the front. Once I press pure direct, only the front speakers work, why??
Hi guys..I have a lg dvd player surrounded sound speakers connected to my dvd player with speaker wire connections..however I want to upgrade my dvd player but most modern models don't have the speaker facilities on the back now...how do I connect my speaker equipment ...thank you.
I have basically two rooms that are able to see a TV and have to sets of five speakers. Is it possible to hook up two sets of front, two of back, and two main?
Sorry typo *two
If I have 5 addional rooms to run music to, this system only have available wiring for two room. How would I increase that to handle all my rooms?
hey bud, i have the rx v800, the cheaper version of this. I cannot get my rear speakers to get any sound. when i hit the test button on the receiver, it gets sound, but no games on my pc, no music or movies, and none on my xbox. any advice?
at about 1:13 if you connect the speakers “180 degrees out of phase” you will loose low freq content. as an experiment, try it with a tone generator and watch your woofers move in opposite directions. decades ago there were attempts at 4 channel reproduction that incorporated phase shift circuitry that gave a wider, interesting sound but low freq was sacrificed. look at old marantz, poineer, kenwood, sansui and even akai recievers and integrated amps. the techniques were to have 2 front speakers in phase and 2 rear out of phase (where cancelling low frequency content is less offensive to overall sound quality) to imitate a larger venue, if you will. i still have a pioneer QL- 60 that offers 4 ch discrete (true 4 channel) , matrix and variable phaseshift (up to 90 degrees out) which was called 4 ch synthesis. there were many approaches to 4 ch but manufacturers couldn’t agree on using the same so recordings could be made en masse. it killed 4 channel in our homes. some home theatre sets offer something in the neighborhood of 4 ch synthesis but using freq envelopes, not phaseshift or matrix. almost like having 4 way crossovers and dividing frequencies from front to rear instead of tweet, squawk, woof...
Hey have a Yamaha V-905 and I also have 2 12 inch subs the are dual voice coil and 1000 watts a piece and I'm not very good at wiring things up. I have them hooked up in the normal speaker holes is there any way I can hook it up in some different hole and it get more bass? Just curious please let me know if your really curious to see what I have I have a video on it on my channel.
Question does your reciever/amplifier have low level ports for subwoofers (low level port is a RCA port to connect a standard single RCA cable from it to your Subwoofer's low level port depending on your system you may have more than one of these. I assume you're SW's are powered.
Check your recievers manual for more information and location if available on your system.
please help me find out how to use my phone as a Yamaha remote
Thanks man this helped alot
Helpful video!
I converted all my wires to banana connectors. My older receivers had the red and black inputs spaced so you could use a dual banana molded as a single connector (one side red, other side black) Seems they now space the terminals so you can't do that anymore. Supposedly for safety reasons.......
It was truly helpfull
does it matter if the speakers are a different brand then the receiver?
no
Yes, you cannot use one brand with another. Also make sure to buy the most expensive kind.
Only if you get a special adapter box called the HiDamp 2000 ($10,000, Amazon). This will allow you to use different brand speakers with your amp..
Super helpful! Thanks!
Thank you so very much. Now I am a happy .
how do i connect a microphone to yamaha htr 5990 ?
YEA REALLY HELP ME OUT THANKS
My sorround doesnt allow me to add more bass its only goes up to -0obs and lower do you know the issue?
0dB is the maximum, does your subwoofer have it's own level control?
that was helpful
I have hi fi speakers with crossover connections. The connections take banana plugs but to crossover I would have to use bare wire. Unless there are plugs which have piggy back wire connections. I cannot find such a product, so I guess bare wire is my only option.
i have yamaha rx v2092 receiver, i am not able to hear any sound or vibrations from my 150w passive subwoofer .. it is not a powered subwoofer .. do i need to get powered subwoofer for v2092 receiver .. thank you
I have one of these Yamaha amps 250 watts don`t have a clue if i got the 2 stereo speakers hooked up right. I have to turn the Volume Way Up to get any Sound . Thanks for the video, i`ll try to figure something out ! :)
I found a Yamaha AV RX 675 seeming in dynamite refurbished condition but I need to know how can I quickly hook up a couple of speakers to see if its functional
@@louisfrank1068 You could always plug in some headphones to see if you get music out of it, that won't tell you if there's music at the speaker terminals, you'll have to actually plug speakers in for that, or get yourself a small 200 watt power meter, that'll tell you if it's putting out anything.
What's the model of your amp, what input were you using?
How do you hook up a 3:1 system?
I noticed you connected the sub rca into a sub input not the sub output beside it .it says multi channel inputs.if this is correct and it's an output why does it say input then ?
Helpful but my home reciever doesnt give my sub sound why?
How to plug that she subwoofer
ahh man thank you for some reason this one stumped me now she's Sounding really awesome
Thank you!
if my amp on one side is 12v that would b were hot wire goes right
Where would u put a car sub on the back of the receiver???
How do I plug in my subwoofer using speaker wires to my reciever
I need to know the same thing
I have a Yamaha rxv1800 but i dont get sound from my center speaker, any fix?
Aron Ringnalda nice pfp
I followed this video to connect my Yamaha amplifier to my speakers. The volume is really low. Is there something I may have done wrong? I used 16 wire. Only about three feet long.