Let’s goooo who else has been waiting for this video for a while😂 some of you(like me)probably aren’t even close to being sub 10 but still have been waiting for this😂
my last layer is holding me back a lot. My LL alone is often 5-6 secs even if I know what oll and pll it's going to be. Since that's the case, I need my cross and f2l to be faster than 3.5 secs... I've spammed last layer well over a thousand times using the finger tricks jperm uses and still can't get the tps and often lock up if I go 'too' fast. The only time I get sub 12 is when my last layer is within 3.5 secs but I need a sune or one of the square olls and one of the u perms or t perm
did you try bt. timer recently, or does it still suck for pro's.My gan-i, cant always keep up, but still recognize my solve. This timer is more accurate than stackmate/cubetimer, since you just start turning the cube to start and stop timing when done.
PopFizzCJ Improve look ahead, learn full 2 look oll and full pll if possible. Put emphasis on fingertricks.make cross effeciently every solve u do even if it takes unlimited inspection time. Know all effective ways to solve any f2l case
Thank you so much Jperm for all your amazing content. Thanks to you I just got my first sub 10 today (haven’t really watched this video properly) after just 5 months of getting into cubing even though I started with a virtual one a few months before to learn how to solve a cube
@@Ceyxzl yes I've learnt it, I'm practicing it for a like a week now. Can you tell me how long it will take to get good at cfop bcos I'm struggling a lot in f2l.
This video helped me a lot to improve.....my average is around 14 sec but whenever i see ur video and start cubing it will come to around 12 or 13 seconds..thats great .....
This is better, you can apply all tips here to become sub-12 and you can improve more on that so that you become sub 10 faster because you already know these tips really well
Thanks a lot J Perm , I am able to get sub 12 average s all the time thanks to your sub 12 video. I average in the 11.5 seconds now and I am trying to get sub 10. I am watching your videos and UberCuber 's sub 10 video.
J-perm you are now my most favorite cuber. No one can teach better than you, and I really love all your conent. I hope you keep making fun videos in the future :D
Thank you so much J perm I watch ur vdo for quite long I learnt ur tips and tricks I finally beat sub 10 , it took me around 11 months thank you so much
I was not into 5x5 and I haven't actually watched your 5x5 series. But I really want to start with it. I know how to solve it, like centres, edges and all. I want some advanced algorithms. So please make a video having all required algs for 5x5, ranging from centres to edges to parity. It would be really grateful from your side
When you're planning your cross, do you actually think about the names of the moves? (eg: F U" F R) Or do you do it intuitively (eg: move that one here, insert red, etc)
@@Hilpo-nh8tx Did you forget I was the mastermind behind everything that happened to the life of Harry Potter? Bold of you to assume that I did not find a counter curse to Avada Kadabra
Im writing this comment on December 31st 2023 I average 18 seconds Have a personal best of around 8 seconds I want to be sub 10 in 2024, as if i get lucky i can get 14 second averages. I need to keep learning how to inspect first pair and how to stop double recognizing. I will come back to this comment on February 1st Good luck to everyone else trying to improve! Update: March 6th 2024, I stopped cubing right around mid january, i average 18 seconds still i was hella motivated back in december lmao
while i was watching this video I was doing solves. on one of them i got a 14.07 but the funny thing is I finished f2l when the timer was at 6 seconds lol.
sameee but I got 2 sub 10s yesterday but one of the scrambles were really lucky, try it, it's a one move cross and an f2l pair is already done: 9.75 D2 B L2 D2 R U2 R2 L2 D F' D2 R F2 D2 L2 U' F2 D L' B D2 U2 L D F2
7:30 can someone plz explain this to me?? I am fairly certain that he did it backwards. If they match, white is on the bottom. If they don't, white is on the back. Am I going crazy?!?!?!
Dylan I need help, I avg 11 secs consistently but only 1 in every 40 solves is a sub-10, I can finish F2L in 6 secs avg, cross 1.5 secs avg, oll + pll + auf = 3 secs, where should I improve ?, Just asking :)
I know you're not sub8, but I'm actually averaging 8.6-8.7 and no one has made a video on going from sub10 to sub9 or sub8, so do you think that you could make a video on how to break those time barriers ? I really like your channel, your opinion and your tips are always interesting ^^
+Pablo Contreras thanks! I would, if I was sub-9 or sub-8. I actually got a 9.02 ao50 yesterday, so I'm getting closer. it's mostly about coming up with a way for you to improve look ahead as fast as possible, and also your own creativity in what you want to learn.
I've been cubing for 1 year and a half now I just got my official 13.27 average my times are 11.85,(15.42),15.26,(10.72),12.70 I really want to get sub 10. I notice my flaws especially with cross to f2l transition. I have a huge pause from cross to f2l that takes up to 3 seconds. I'm wondering if doing an x-cross or planning first pair during inspection is required for sub 10. My cross is executed in less then 1.5 seconds f2l done under 6 seconds oll 1.2 seconds and pll 1.3 seconds. Do you guys have any tips on how I can improve and maybe even get to sub 10?:D
I got my first sub 10 officially today (9.43) (got like 2 previously doing repeat solves). bottleneck and PLL skip. I jumped and banged my knee at first but still worth. Nothing can put me down. I average around 16 so this is NUTS to me, my lowest before this was 10.01. Can you imagine lmaoo. keep persevering n you'll get it
That's like 2.5 seconds for Cross, 2.5 for F2L, 2.5 for Oll and 2.5 for Pll plus the time it takes you to pick up the cube and put it down which depending on the person could take a whole second
+Speedcubing Nerd it saves 1 move on average but gives you lots of better first pair tracking opportunities or easy finger trick crosses. so it's not a gigantic difference but I recommend it if you're considering it. dual neutrality is about half way between 1 color and 6 colors.
Thanks for answer. Right now i am using yellow and white, and i feel like its a lot better than one color. Im not that good yet(20s(global))But i wonder if its good to start earlie or not. I will try and get used to look ahead on the other colors i think.
It does help but I've noticed that even with 2 look OLL I'm pretty fast. For me it's my F2L that significantly lowers my time. I've started to realise just how important look ahead is. Now I've started trying to look ahead my times are slowly increasing, even if only a tiny bit.
Let’s goooo who else has been waiting for this video for a while😂 some of you(like me)probably aren’t even close to being sub 10 but still have been waiting for this😂
me too lol i am going to enter my frist competiton
I'm still averaging at 35 seconds though.
Yee
Thanks for this, man! I managed to solve a 3x3 in 7 seconds!!!
yea lol im like sub 25
Next: how to be sub wr!
daniel park Hmmm... I need the how to be sub UWR more 😕 I'm Already sub WR
Next, sub 1
Sykbo YT are you still?
@@sykboyt4737 like your average or what
ruclips.net/video/8aBYZUFevj8/видео.html thank me later
Anytime someone asks me how to be sub-10 from now on I’m just going to recommend them this video. Amazing job as always J Perm!
1. Plan further in inspection
2. Regripless Cross Fingertrick
3. Advanced F2L algs
4. Use deduction in look ahead
5. Timing just f2l (6.5s)
6. Cleaning up LL mistakes
7. Controlling turn speed
8. Stay motivated
thanks
🟠
my last layer is holding me back a lot. My LL alone is often 5-6 secs even if I know what oll and pll it's going to be. Since that's the case, I need my cross and f2l to be faster than 3.5 secs... I've spammed last layer well over a thousand times using the finger tricks jperm uses and still can't get the tps and often lock up if I go 'too' fast. The only time I get sub 12 is when my last layer is within 3.5 secs but I need a sune or one of the square olls and one of the u perms or t perm
@@ajaj-yq6rewhat cube do you use?
also maybe it's better for you to slow down your turning a bit so you don't lock up, if it isn't your cube
We all know we need to get better at hitting the stop timer button
did you try bt. timer recently, or does it still suck for pro's.My gan-i, cant always keep up, but still recognize my solve. This timer is more accurate than stackmate/cubetimer, since you just start turning the cube to start and stop timing when done.
I'm so glad this channel existed
I finally got a sub-10 today! (9.84)
it was full step too lol
Nice man 👍
ayyy nice
Congrats! I got my first sub-10 (9.51) a month ago and now I’m getting around two to three sub-10s every 50 solves
omg. I have a question. Can i do like at least -40 with two look pll and oll and beginner cfop ;-;
Why Bother yes
I loooove your vids. You haven't uploaded as much, but man alive, it is worth the wait!!
13 min overview. That's what the world needs. Very complete video
I want to see you get a WR in 3x3. That would be so cool; you deserve it!
JCB ShortFilms I wanna be sub 1:00
PopFizzCJ start using cfop
Aryan SATPATHY I keep trying, but it does not make any sense
PopFizzCJ Improve look ahead, learn full 2 look oll and full pll if possible. Put emphasis on fingertricks.make cross effeciently every solve u do even if it takes unlimited inspection time. Know all effective ways to solve any f2l case
He does not deserve it.
Thank you so much Jperm for all your amazing content. Thanks to you I just got my first sub 10 today (haven’t really watched this video properly) after just 5 months of getting into cubing even though I started with a virtual one a few months before to learn how to solve a cube
I got my first sub 10 today with last layer skip lol!
@@remyscube Good job!
The BEST VIDEO , I now average 10 seconds thank to your videos , I'm going to do everything from this video to become sub 10.
THANK YOU SO MUCH!!!!
And now you are sub 9
Yup, actually sub 8.5 consistently.
@@keplercuber9155 wow
I am stuck at 9.9-10.2 any tips ?
@VK CUBED I would say become Dual CN , then learn better OLL , PLL and F2L algs.
Learn respected finger tricks and sporadically drill them.
@VK CUBED also how did you know I was sub 9 ? I didn’t tell anyone
This is so helpful! I average mid 10s now and I am hoping to get sub 10 soon!
How fast are you now?
@@amarachiokonkwo3859 sub 7
@@rwu0812 That's cool.
@@rwu0812 holy shit!
@@rwu0812 damn
Everybody: why am I watching this I should be watching sub 12
Me: why am i watching this I should be at sub 1 min.
I'm just watching random cubing vids while practicing my algs...
Why am I watching this I should be at sub 20
Me: Why am I watching this I should be at sub 25
Why am i watching this i should be on the tutorial
(I'm a cuber this was meant to be a joke)
@@Ceyxzl yes I've learnt it, I'm practicing it for a like a week now. Can you tell me how long it will take to get good at cfop bcos I'm struggling a lot in f2l.
Your this kind of tutorials will end up making me sub 10
Englush
I feel relaxed as long as I know J perm is uploading
This video helped me a lot to improve.....my average is around 14 sec but whenever i see ur video and start cubing it will come to around 12 or 13 seconds..thats great .....
Whoa Whoa.. Finally it's out. I average high 13 to low 14. Think this one should help me. Thanks a ton!!!
:)
Why am I watching this.I should be watching the sub-12 one.
Why am I watching this. I don't even own a rubix cube
qdp612 go buy one
qdp612 Rubik's*
Same
This is better, you can apply all tips here to become sub-12 and you can improve more on that so that you become sub 10 faster because you already know these tips really well
Your pll and oll algs are so smoothly executed it’s insane 🤯
Thanks a lot J Perm , I am able to get sub 12 average s all the time thanks to your sub 12 video.
I average in the 11.5 seconds now and I am trying to get sub 10.
I am watching your videos and UberCuber 's sub 10 video.
i love watching this and applying some of the tips to getting sub 20
J-perm you are now my most favorite cuber. No one can teach better than you, and I really love all your conent. I hope you keep making fun videos in the future :D
I'm the guy in the background at 11:15
Congrats
Excaliber Cuber David no one cares tbh
Excaliber Cuber David 😂😂😂
@@msgbbx1860 I care.
Excaliber Cuber David congrats 250k people have now seen you
You gave us 8 tips thanks for the extra tip!
I also have my own 2 cents.
Stay receptive to your hardware. You never know, how your puzzle is setup could always be improved.
Sounds like an excuse
I'm just sub-20 of average, trying to get sub-15, but this motivated me a lot.
Probably my favorite video on RUclips
Really nice and helpful tutorial as always Dylan
Unknown Cubing yup
Unknown Cubing Dylan Wang
while watching this video, i ended up getting my pb average of 7.87 seconds and 3 sub 7 solves which is just insane to me. thank you for the tips!
Yehey! Thanks JPERM! I was waiting for this!
Thank you so much J perm
I watch ur vdo for quite long
I learnt ur tips and tricks
I finally beat sub 10 , it took me around 11 months thank you so much
@jperm as I said, you should do “7 tips to be the best cubing channel”. I love your work and btw I’m learning a lot from your f2l pdf!
I was not into 5x5 and I haven't actually watched your 5x5 series. But I really want to start with it. I know how to solve it, like centres, edges and all. I want some advanced algorithms. So please make a video having all required algs for 5x5, ranging from centres to edges to parity. It would be really grateful from your side
When you're planning your cross, do you actually think about the names of the moves? (eg: F U" F R) Or do you do it intuitively (eg: move that one here, insert red, etc)
+Jorza4daWorld intuitively. I imagine where the pieces will move and what they will affect
Thank you for the videos, I've training myself to do my best
Why am I watching this I should be on the sub 30 one
Why are you on this video when you are dead?
@@Hilpo-nh8tx ??
Albus Percival Wulfric Brian Dumbledore did dumbledore not die?
@@Hilpo-nh8tx Did you forget I was the mastermind behind everything that happened to the life of Harry Potter?
Bold of you to assume that I did not find a counter curse to Avada Kadabra
Albus Percival Wulfric Brian Dumbledore IF YOU DIDN’T DIE HIA DID THE MASTERY IF THE ELDER WAND TRANSFER TO SNAPE
2:25 literally whenever I try I and show people I mess up
that percentage thing really motivated me!!
You uploaded this on my birthday !! Your video is absolutely awesome !!
Yay 😀!!!! You finally made it!!
that last solve was PRO!
This was the most helpful cubing video for me
Im writing this comment on December 31st 2023
I average 18 seconds
Have a personal best of around 8 seconds
I want to be sub 10 in 2024, as if i get lucky i can get 14 second averages.
I need to keep learning how to inspect first pair and how to stop double recognizing.
I will come back to this comment on February 1st
Good luck to everyone else trying to improve!
Update: March 6th 2024, I stopped cubing right around mid january, i average 18 seconds still
i was hella motivated back in december lmao
E
have you come back?
After about 2 and a half years of cubing, I got my first sub 10 today!
while i was watching this video I was doing solves. on one of them i got a 14.07 but the funny thing is I finished f2l when the timer was at 6 seconds lol.
recubeulous Thats a really inefficient Last Layer then. Work on that
It was sad. I paused like crazy even though i knew 2look oll and full pll
Oof
I love j perm and I got my first 10.91 and I couldn’t of done it without your videos thank you😃😃😃😃😃
your videos are just amazing and helpful ..
How to be sub-10:
1. Learn CFOP
2. Learn fingertricks
3. Turn as fast as Feliks turn
Me: "Why can't I stop averaging 12 seconds??"
Also me: "Finally, only 30 more OLL algorithms to learn"
I am very thankful you make this video
It's finally come out.
Thank you for making this video J Perm
This is helping me already
Amazing video dude
*subtle corner twist*
Kyle Zwiers LOLL
I love your tutorials
Finally a video that helped me! Thank you so much!
Your videos are really great...
Could you make another Advance video on look ahead plzzzzzz
1% of my solves is sub 10 xD
+Szymon Brzana make it 2%!
J Perm good idea
Szymon Brzana one of my solves is sub 30 :'D but i like my 2x2 more xD
sameee but I got 2 sub 10s yesterday but one of the scrambles were really lucky, try it, it's a one move cross and an f2l pair is already done: 9.75 D2 B L2 D2 R U2 R2 L2 D F' D2 R F2 D2 L2 U' F2 D L' B D2 U2 L D F2
I have gotten 4 sub-10s in my life...
got my first sub 10 ao5! It’s a 9.77
7:30 can someone plz explain this to me?? I am fairly certain that he did it backwards. If they match, white is on the bottom. If they don't, white is on the back. Am I going crazy?!?!?!
As of me you are best cubing youtuber
i only get motivated by seeing your videos
Really nice video...again. Thanks !
You always help us
Great video as always!
+Stan Smith thanks!
Help Me a Lot, Thanks
Close to 200k subscribers !
Thanks man!
np!
J perm after a year: Hi friends today we are going to see how to be sub-3.
Dylan I need help, I avg 11 secs consistently but only 1 in every 40 solves is a sub-10,
I can finish F2L in 6 secs avg, cross 1.5 secs avg, oll + pll + auf = 3 secs, where should I improve ?, Just asking :)
i learn from you cfop full method. 1 request make a video for pyramix
0:19 holy crap that z perm was nice
That was a U Permutation
yay you finally made it :D
Thanks for the tips I really needed this I've improved a little but it's not noticeable yet but thanks though
this is exactly what i need
Thank you for this tutorial :D this helped me a lot
color neutral solve is slighty easier to find first pair
i do f2l in 4 seconds , but i still average about 16-17 . pls help bruh
@Emiko tell me something i don't know :(
@Emiko i have learned full oll and full pll. but its just lockups uk!. seems i need a better cube?
@Emiko *update* I got a 13 second average yesterday. Think I am improving. Also yes will see to rs3m :)
I know you're not sub8, but I'm actually averaging 8.6-8.7 and no one has made a video on going from sub10 to sub9 or sub8, so do you think that you could make a video on how to break those time barriers ?
I really like your channel, your opinion and your tips are always interesting ^^
+Pablo Contreras thanks! I would, if I was sub-9 or sub-8. I actually got a 9.02 ao50 yesterday, so I'm getting closer.
it's mostly about coming up with a way for you to improve look ahead as fast as possible, and also your own creativity in what you want to learn.
If I send you a video can you make a critique on it ? (even if it's not on video, it will help me lot ^^)
+Pablo Contreras yeah I can leave a comment for you for sure
J Perm ok I'll try to do that soon thank you !
I've been cubing for 1 year and a half now I just got my official 13.27 average my times are 11.85,(15.42),15.26,(10.72),12.70
I really want to get sub 10. I notice my flaws especially with cross to f2l transition. I have a huge pause from cross to f2l that takes up to 3 seconds. I'm wondering if doing an x-cross or planning first pair during inspection is required for sub 10. My cross is executed in less then 1.5 seconds f2l done under 6 seconds oll 1.2 seconds and pll 1.3 seconds. Do you guys have any tips on how I can improve and maybe even get to sub 10?:D
plan first pair
This is every cuber's dream
Helpful ty
0:16 I felt the journey
very helpful,finally i got sub 10!!!
Nice video very helpful thank for you video || I will try it later
Good video bro
thanks!
My cross and f2l is like 9 seconds
Is that good??
Justin Bieber Malaysia yes for my standards. I average like 28-32 secs at home
Nice video im also sub-10 but I learn in this video very much...
When I start learning 1 look pll, I think it might be a good idea to start with the N and G perms, do them a million times then work on the rest lol
J Perm: 7 tips to be sub 10
Me: it takes my 10 seconds to do my cross
I got my first sub 10 officially today (9.43) (got like 2 previously doing repeat solves). bottleneck and PLL skip. I jumped and banged my knee at first but still worth. Nothing can put me down. I average around 16 so this is NUTS to me, my lowest before this was 10.01. Can you imagine lmaoo. keep persevering n you'll get it
Nice
Can we just learn the valk last slot instead of the F2L? it is sooo boring memorizing F2L
VLS is far less useful, as it only saves a few moves per solve
@@JPerm ok thanks j perm
That's like 2.5 seconds for Cross, 2.5 for F2L, 2.5 for Oll and 2.5 for Pll plus the time it takes you to pick up the cube and put it down which depending on the person could take a whole second
No. 1 second for cross. 5 for f2l 2.5 for oll 1.5 for pll
10:45 have you tried first F with lefty thumb? I do that and it flows really well!
I got my first sub 10 today!
I got 3 : 24!
Holy crap, congratulations!
@@TyperMarlinGames it was a joke
That's very impressive
Any thoughts on color neutrality? Nice video!
+Speedcubing Nerd it saves 1 move on average but gives you lots of better first pair tracking opportunities or easy finger trick crosses. so it's not a gigantic difference but I recommend it if you're considering it. dual neutrality is about half way between 1 color and 6 colors.
Thanks for answer.
Right now i am using yellow and white, and i feel like its a lot better than one color. Im not that good yet(20s(global))But i wonder if its good to start earlie or not. I will try and get used to look ahead on the other colors i think.
+Speedcubing Nerd if you want to start, then start soon because it only gets harder
Learn full oll🤓😝😗
It does help but I've noticed that even with 2 look OLL I'm pretty fast.
For me it's my F2L that significantly lowers my time.
I've started to realise just how important look ahead is. Now I've started trying to look ahead my times are slowly increasing, even if only a tiny bit.