I dont mean to be so offtopic but does anybody know of a trick to get back into an instagram account? I stupidly forgot my password. I appreciate any help you can offer me
@Kieran Braylon thanks so much for your reply. I found the site on google and I'm in the hacking process atm. I see it takes quite some time so I will reply here later with my results.
Thank you for taking the time to show. Personally Cad is so slow and to much going on to make stuff for 3D printing. I use Matter control and I could do what you have done in around 5 minutes. But I want to learn Free cad for CNC that has complicated toolpath's and so I will keep watching you vids to learn :)
Only one problem. People with not so good eye site the cursor disapear and is way to small. There is ways to make this better. Some sites you can downlpad it from. Thanks
I subscribe to "1leosayer"_s opinion that "This is the best video for FreeCAD that I have found thank you for the clear and informative commentary" ...BTW how did You the "highlight" the constraints ?... Thank You for Sharing and teaching us ...
I alway find it better to create just a Helperline sketch and use that as reference for sizes and diameters. I never use the pink sketch references. When using this example the entire document will break when just adding e.g. another radius to the master sketch. Not using any references was the only way that kept a part from falling apart when editing. I always use a master sketch with all lines and then Datum planes and sketches which I position using the values defined in the master sketch. External Geometrie should not be used unless FreeCADs broken reference system get fixed.
Awesome tutorial! I have one issue when i created a mesh it is not smooth like its for you, i can see faces and few of them are distorted on the beveled inner circle.
This can be a setting in your Freecad , check how it looks in the Slicer. In Freecad the meshes are just estimated . Also check that you mesh as "Standard" with the same settings i use in my Videos
@@hagei406 In slicer it looks the same, those bevels are not smooth an some particular faces are kinda flat, Also i sued the same default setting as you for create mesh. But however i also tried to just export it as stl without creating a mesh and then it looks ok, so i would ask you whats the purpose of creating a mesh? snipboard.io/9z5Uah.jpg here is screenshot with those distortions and not smooth bevel, i hope url is displayed?
@@Michal.mikhael When you export directly as STL Mesh is created automatically. But with creating a mesh first and then exporting it, you have more control over the process. Maybe some setting is wrong. Also, the video was loooong ago V0.18 and maybe things changed.
Thanks for your videos. It seems like you know your way around FreeCad. When I use FreeCad I always get greyed out or error things in the combobox structure. Yes I am a noob but I guess I am not alone in not understanding what I do wrong to generate these errors. Do you have any know-how on how to avoid these roadblocks regarding what to do and what to avoid to break the object structure when using FreeCad? You never seem to get them in your videos. Maybe a subject for a future video?
@@hagei406 No I do not know what I do wrong I usually solve things by saving frequently and retry things in a different order or a different way. One thing I have learned is to never put fillets on a design until the very end. I am not looking for you to answer a specific question. I have not seen anyone explain the object view in a video. Just more a suggestion on a topic to make a video about.
@@niklaswennerstrand1010 When comes to Fillets or Chamfers their constructions are based on particular edges that were maid in previous steps. If your adjustment in previous step makes new mesh with different structure then steps based on chosen edge number will give you errors. For example if you have pocket in the middle of a part then changing size of a pocket most likely not change a mesh structure but only position of vertices. But if you move your sketch hole into the edge of previous solid mesh, then you will get open hole and and different structure of a mesh. If a fillet was based for example on Edge15 then in new mesh structure Edge15 will be in different place. You will get fillet in most unexpected place but still can get no errors. Sometimes that edge will be in such a place that fillet can't be constructed and you will get errors. So, be careful with features that works on concrete faces or edges.
hello,@ 19:02 i did as iknow all of you step but my screw hole not linear?, oh yah for th diametr of screw i got eror msage that said "expresion cannot evaluate to a value" and i try to manual insert with 2,2mm ,what did i wrong?
I had errors when I followed Harald's instructions typing in 2,5 mm. But no error when I type 2.5 mm. My FreeCAD installation didn't like the comma. Perhaps it's a setting in Preferences.
Hi, I’m following your instructions and when I want to get to “Create an edge linked to external geometry,” it won’t let me do that. It will mark an error when I'm over the line?
If your external geometry is in a different FreeCAD Body, just clicking won't work. In that case, you'd need to use a Shape Binder. See wiki.freecadweb.org/PartDesign_ShapeBinder. Once you've created a Shape Binder in your destination Body, that has references to the edges you want from your source Body, you can then refer to the edges in the Shape Binder via links to external geometry, just as if the Shape Binder were a Sketch in your destination Body.
4 года назад+1
Oh, bald auch auf Deutsch? Mann kann vieles verstehen, aber das Schulenglisch reicht nicht ganz.
It is really awesome video. I thank you and the FreeCAD institution.
This is outstanding. I learned a great deal. Thank you.
Finally a comprehensive tutorial that explains how to make a part. Thank you for the step by step process, your video is well done!
I dont mean to be so offtopic but does anybody know of a trick to get back into an instagram account?
I stupidly forgot my password. I appreciate any help you can offer me
@Santino Kameron Instablaster ;)
@Kieran Braylon thanks so much for your reply. I found the site on google and I'm in the hacking process atm.
I see it takes quite some time so I will reply here later with my results.
@Kieran Braylon it worked and I now got access to my account again. I'm so happy:D
Thanks so much you saved my ass :D
@Santino Kameron you are welcome =)
This is the best video for Freecad that I have found thank you for the clear and informative commentary
This is the first video that does a fantastic job explaining the use of constraints and centering thank you.
Thank you your video's have helped me a lot with FreeCAD.
Thank you for this helpful video to illustrate quite a few important concepts of FreeCAD modelling via a construction of relatively simple object.
Thanks for the helpful video! I had used FreeCAD spreadsheets to set master dimensions, but didn't know you could use a Sketch for the same purpose.
Just what I was looking for. Thanks.
Thank you for taking the time to show.
Personally Cad is so slow and to much going on to make stuff for 3D printing.
I use Matter control and I could do what you have done in around 5 minutes.
But I want to learn Free cad for CNC that has complicated toolpath's and so I will keep watching you vids to learn :)
Very informative. New sub
Good job! Learned several new and useful things.
Thanks, appreciated - a well presented tutorial ever found for FreeCAD for beginners
This is excellent, Thanks!
Great tutorial for me. Thanks a lot
Thank you very much for your tutorial video, it helps me a lot.
Great video and fun thank you
"create an edge to an external geometry" geometery does not seem to work. I get a second square, but bigger.
Only one problem. People with not so good eye site the cursor disapear and is way to small. There is ways to make this better. Some sites you can downlpad it from. Thanks
I subscribe to "1leosayer"_s opinion that "This is the best video for FreeCAD that I have found thank you for the clear and informative commentary" ...BTW how did You the "highlight" the constraints ?... Thank You for Sharing and teaching us ...
This is some settings, i don´t t remember. Must have to do wuith colors.
I alway find it better to create just a Helperline sketch and use that as reference for sizes and diameters. I never use the pink sketch references.
When using this example the entire document will break when just adding e.g. another radius to the master sketch.
Not using any references was the only way that kept a part from falling apart when editing. I always use a master sketch with all lines and then Datum planes and sketches which I position using the values defined in the master sketch. External Geometrie should not be used unless FreeCADs broken reference system get fixed.
Awesome tutorial!
I have one issue when i created a mesh it is not smooth like its for you, i can see faces and few of them are distorted on the beveled inner circle.
This can be a setting in your Freecad , check how it looks in the Slicer. In Freecad the meshes are just estimated . Also check that you mesh as "Standard" with the same settings i use in my Videos
@@hagei406 In slicer it looks the same, those bevels are not smooth an some particular faces are kinda flat, Also i sued the same default setting as you for create mesh.
But however i also tried to just export it as stl without creating a mesh and then it looks ok, so i would ask you whats the purpose of creating a mesh?
snipboard.io/9z5Uah.jpg
here is screenshot with those distortions and not smooth bevel, i hope url is displayed?
@@Michal.mikhael When you export directly as STL Mesh is created automatically. But with creating a mesh first and then exporting it, you have more control over the process. Maybe some setting is wrong. Also, the video was loooong ago V0.18 and maybe things changed.
Thanks for your videos. It seems like you know your way around FreeCad. When I use FreeCad I always get greyed out or error things in the combobox structure. Yes I am a noob but I guess I am not alone in not understanding what I do wrong to generate these errors. Do you have any know-how on how to avoid these roadblocks regarding what to do and what to avoid to break the object structure when using FreeCad? You never seem to get them in your videos. Maybe a subject for a future video?
well, if i know what you do wrong, then i could try helping you. Can you contact me on my mail adress ?
@@hagei406 No I do not know what I do wrong I usually solve things by saving frequently and retry things in a different order or a different way. One thing I have learned is to never put fillets on a design until the very end. I am not looking for you to answer a specific question. I have not seen anyone explain the object view in a video. Just more a suggestion on a topic to make a video about.
@@niklaswennerstrand1010 When comes to Fillets or Chamfers their constructions are based on particular edges that were maid in previous steps. If your adjustment in previous step makes new mesh with different structure then steps based on chosen edge number will give you errors.
For example if you have pocket in the middle of a part then changing size of a pocket most likely not change a mesh structure but only position of vertices. But if you move your sketch hole into the edge of previous solid mesh, then you will get open hole and and different structure of a mesh. If a fillet was based for example on Edge15 then in new mesh structure Edge15 will be in different place. You will get fillet in most unexpected place but still can get no errors. Sometimes that edge will be in such a place that fillet can't be constructed and you will get errors.
So, be careful with features that works on concrete faces or edges.
full hd plis
hello,@ 19:02 i did as iknow all of you step but my screw hole not linear?, oh yah for th diametr of screw i got eror msage that said "expresion cannot evaluate to a value" and i try to manual insert with 2,2mm ,what did i wrong?
I had errors when I followed Harald's instructions typing in 2,5 mm. But no error when I type 2.5 mm. My FreeCAD installation didn't like the comma. Perhaps it's a setting in Preferences.
What's the difference between the meshing algorithms and why is NetGen always disabled on my FreeCad (on Linux)
Honestly, i don´t know . I only know that for me standard mesher worked best. I would recommend you ask on the forum.
Hi, I’m following your instructions and when I want to get to “Create an edge linked to external geometry,” it won’t let me do that. It will mark an error when I'm over the line?
At which time ?
If your external geometry is in a different FreeCAD Body, just clicking won't work. In that case, you'd need to use a Shape Binder. See wiki.freecadweb.org/PartDesign_ShapeBinder. Once you've created a Shape Binder in your destination Body, that has references to the edges you want from your source Body, you can then refer to the edges in the Shape Binder via links to external geometry, just as if the Shape Binder were a Sketch in your destination Body.
Oh, bald auch auf Deutsch? Mann kann vieles verstehen, aber das Schulenglisch reicht nicht ganz.
das nächste ist wieder in Deutsch. Ich wechsle immer ab