They All Missed This!... A Smart Home Idea No One Else Thought Of
HTML-код
- Опубликовано: 19 июл 2024
- The Aqara FP2 changes EVERYTHING!
This video is sponsored by Aqara, all opinions are my own
The Aqara FP2 is a Smart Home gadget like you've never seen, it is a Wifi presence sensor that works with Alexa, and Works with Apple Homekit, it uses MMwave technology to act as a radar to establish if there is a human presence in individual zones and can carry out Smart Home routines using Alexa, Apple Homekit, or the Aqara ecosystem. There is no hub required, buy it below if there's stock!
BUY THE AQARA FP2 PRESENCE SENSOR
As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission at no extra cost to you :)
UK: amzn.to/3CPcDH0
US: amzn.to/3pk5oE5
Checkout my friends:
@StusReviewsUK
@SmartHomeSolver
@EverythingSmartHome
=============================
BUY ME A BEER
Donate to the channel: paypal.me/PaulHibbert
Become a monthly contributor on Patreon: / paulhibbert
==============================
THE ULTIMATE SMART HOME LIST!
As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission at no extra cost to you :)
SWITCHBOT PRODUCTS
switch-bot.com/PaulHibbert
CONBEE STICK (ENABLES ZIGBEE DEVICES TO CONNECT TO HOME ASSISTANT):
UK: amzn.to/3JOseIr
US: amzn.to/3sn3KzX
OUTDOORLED STRIP (REQUIRES TUYA ZIGBEE HUB OR CONBEE STICK AND PI)
GLOBAL LINK: s.click.aliexpress.com/e/_A8iP4d
AQARA ZIGBEE MOTION SENSORS AND DOOR SENSORS (REQUIRES AQARA HUB OR CONBEE STICK & PI):
UK: amzn.to/2VlQ4Hj
US: amzn.to/2UUXkKM
AQARA LIGHT BULB E27 (REQUIRES AQARA HUB OR CONBEE STICK & PI):
UK: amzn.to/3j7xvzx
US: www.aqara.com/en/smart_light_...
AQARA LIGHT SWITCH (REQUIRES AQARA HUB OR CONBEE STICK & PI):
UK: amzn.to/36Mg70c
US: amzn.to/37WZBeh
AQARA BATTERY REMOTE LIGHT SWITCH (REQUIRES AQARA HUB OR CONBEE STICK & PI):
UK: amzn.to/3JH9SsZ
US: amzn.to/3JKolEC
FLIC BUTTONS (SMART BLUETOOTH BUTTONS):
SINGLE FLIC: flic.io/shop/flic-2-single-pa...
3 FLICS AND A HUB (starter kit): flic.io/shop/flic2-starter-ki...
3 FLICS WITHOUT A HUB: flic.io/shop/flic-2-three-pac...
BUY A RASPBERRY PI HERE (TO HOST HOME ASSISTANT):
UK: amzn.to/3HmAYUA
US: amzn.to/3hlmuJS
BROADLINK RM4 PRO (TO CONTROL INFRARED DEVICES SUCH AS TV & RF DEVICES SUCH AS PROJECTOR SCREENS)
UK: amzn.to/3NnfRpe
US: amzn.to/3Nota96
ZIGBEE PLUG SOCKET (REQUIRES ZIGBEE HUB SUCH AS HUBITAT OR SMARTTHINGS):
UK: amzn.to/3NjSehv
US: amzn.to/3Ddm2aI
REMOTE CONTROL CANDLES (INFRARED CAN BE CONTROLLED USING A BROADLINK RM4 PRO)
UK: amzn.to/2YSmAk2
US: amzn.to/3cj4DPF
DECORATIVE BULBS FROM SHELLY
GLOBAL LINK: event.2performant.com/events/...
ZIGBEE SPOTLIGHTS & RGB REMOTE
UK: amzn.to/2GYvbLM
US: amzn.to/3kwsgru
ROBOROCK ROBOVACS
UK: amzn.to/35HyK0N
US: amzn.to/35GU9Hk
SOMA SMART BLIND MOTOR:
www.somasmarthome.com/
LOCK COVERS (MARRIAGE SAVERS)
UK: amzn.to/3wGT0PA
US: amzn.to/3JKKF0O
4K HORIZON PRO PROJECTOR IN THE BEDROOM
UK: amzn.to/3yHXt2I
US: amzn.to/37zNEbh
AMAZON ECHO 4TH GENERATION:
UK: amzn.to/3eaiKZB
US: amzn.to/3spreBe
ECHO SHOW 10
UK: amzn.to/3lSuWBH
US: amzn.to/39gE9Pf
0:00 - Intro
1:50 - Aqara FP2 Overview
4:15 - Aqara FP2 In-depth Review
7:27 - The Ultimate Smart Home Idea
10:32 - What's wrong with it?
#SmartHome #review #smartgadgets #alexa #amazongadgets #futuretech #aqara 
Наука
Happy Saturday everyone! This is easily the biggest leap in home automation yet, Aqara reckon stock will be in around mid-July... BUY THE AQARA FP2 PRESENCE SENSOR
As an Amazon Associate I earn from qualifying purchases. By buying through any of the links below I will earn commission at no extra cost to you :)
UK: amzn.to/3CPcDH0
US: amzn.to/3pk5oE5
Sold out in the UK already, nice work Hibbert
Just bought mine through the US link! Can't wait to put all kind of wild automations in my husband's zones without him knowing 🤣
Love this product they sold out a few times in the US. Got a few of these in my house now.
Another great episode, sir!! I managed to get one a couple of months ago and have it in our kitchen to trigger the separate lights in there at either end.
Couple of things though:
Firstly is the firmware upgrade to 1.1.7_0002 was the biggest mistake I’ve made 😂 I constantly have ghosts everywhere, and have to constantly reset the absence status. Fingers crossed 🤞🏻 that Aqara will bring out the next upgrade soon as this one has been out about a month or so now.
Secondly, I wasn’t been able to get the light sensor to show in Alexa when I set it up, to be able to trigger the lights only coming on when the lux levels are low and had to resort to just setting them to come on between certain times of day. We’re your routines created in Alexa or HA for the lux levels?
Keep up the good work 👍🏻
Hi Paul, sounds like a tremendous addition to any smart home! Although it is implicit in this being a presence sensor, I do think you should point another advantage: being a presence sensor rather than a movement sensor it will remain triggered also when I am reading a book, or watching TV!
This was the reason I cannot use motion sensors in areas wehre I do not sit still for a while, this thing would also work properly in my living room and bedroom!
But is for switching the heating with such sensors: I suppose you can - provided you do not mind getting back to a room and discover it being bloody cold. Light triggers immediately, heating does not. If the kettle is switched off, it would be hours before your room is heated properly again.
What a great bit of kit.
A waterproof outdoor version would be good. You could set up zones so the lights outside your house get brighter when somebody gets closer!
I love that!!
Yeah, lots of external possibilities to explore.
Perhaps the aqara sensor could be housed in a plastic watertight housing? I'm guessing that plastic in front of it wouldn't affect the sensor as it is microwave?
Dispensing with infrared pir's would be genius and most welcomed as presumably there would be considerably less if not no false alarms.
I wonder what effect wind or rain would have?
Maybe a good project for Mr Hibbert ?
Outdoor cameras are pretty good for zone detections and recognising people and animals. Perhaps they could use with extra features, but biggest caveat is the price.
That was the best use of "It just woooooooooorks!" in ages! 🤣
It just werrrrrrrrrrrrrrrrks! ❤️
FP2 early adopter here with a word of caution. Aqara can be absolute derps with firmware! They all but bricked some people's FP2s in May and it took them until THIS WEEK to release a fix. My sensor was unable to show anyone in live view and thus, was a glorified paperweight for over a month. That wasn't very cool.
What fix? I have no fix
@@Chesterflaps The latest app update they pushed a few days ago fixed it for me
I have 6 of the FP2s and they all have issues with ghosting, where multiple people show up when only one is in the room. Also many times when no one is present. I've done all the smart calibration stuff, no dice. No fans or weird equipment to trip them up in most scenarios.
They're not quite ready for mainstream.
Same here , the ghosting issues are a real pain in the .. hope a update will fix it
@@leonsneeuw3865 some people argued that I should not update the firmware but I tried both versions with similar results. When it works, it's neat, but all these possibly-'sponsored' videos don't talk about the long term pain points.
Same here, lots of ghosting issues. This sensor was a waste of money.
@@ankitduseja1856 it's pretty much garbage yeah
Bro you have ghosts in your house
As have you and everyone else I pay attention to, I have been quite intrigued by the FP2. I've got just the use case you mentioned (two people, separate desks) and I'm looking forward to getting that automation working.
"Works locally and without a need for a bridge": Well done, Aqara. Well done indeed. All you folks that require a bridge, pay attention.
Directly advertising the zone presences and light sensor: This is the kind of thing that makes those of us who actually program Home Automation sigh in relief because, as you say, it's almost unprecedented. I can hope it's the start of a trend.
Mains powered: Agreed. I dislike changing batteries. As much as I dislike cords hanging off things, I like changing batteries less.
Doesn't work with Matter: Odd. I can't think of why one would bring out a device these days without Matter integration. Not a problem for me (being one of those Home Assistant, using HomeKit without any iThings) but I can see this could be an issue.
80 quid ($82.99): Yes, it's a bit steep except that the zone functionality can do the work of many individual devices. It would pose a limit on such things as "just getting one for fall sensing and another for zone sensing."
Great review as always with all kinds of data I can use. Thanks.
This thing is bloody fantastic!!! You've sold me, Paul!
another great video. Do enjoy your presentation. I saw these after Smart Home Solver reviewed and grabbed two of them. Having used for a few months now I can confirm these things are awesome. Working with an electrician to ceiling mount some in bathrooms for fall detection. Highly recommend
My main exercise these is doing hip thrusts whenever Paul mentions Home Assistant! Home Assistant!
*Humps the air in perfect unison.
One small annoyance is the missing ability to rotate the map in Aqara's app so the device can be installed in a corner, say between living and dining room areas that meet up at the corner of the house. Apparently there was mention of this feature coming on their website a while back, but it was removed.
Thanks for another awesome video. I got this before launch and it was a huge disappointment at first as I had issues with ghosting and my lanky grey cat would trigger it all the time. Including tuning the tv on at 5am. Or as I would be cooking my kitchen lights would switch off as it thinks I’m not here but I am!
I then paired my HomeKit routines /automations with a bunch of homebridge virtual switch so I had a bit more fine control. Ie if cooking switch on on and no presence detected, after I had entered the zone to do nothing
LoL... Sometimes I call my dog "boo-boo"... So when I come home and say "hey boo-boo!" My Google says, "hi Rob. How are you today?" 🤣🤣🤣
This instantly replaces the motion sensors I have on my stairs. Wish I'd had access to this a few years ago.
Happy Saturday Paul. Thanks.
Glad you made this video, I needed one last push to buy a few. Thanks
Another excellent entertaining and informative presentation. I look forward to every single one a lot and TBH, most times I just don't get UK type humor. You I can understand just fine. On an unrelated subject, many are also shifting to Rumble since YT has been messing with their presentations.
I like these presence sensors but are they only a series circuit or can they work in parallel with traditional controls? Do they need to be removed and the device plugged in directly in case the sensor fails in other words for those who don't understand?
Sounds amazing! Would this work if housed in a plastic bag for waterproofing and installed in an open air area? Like a balcony or roof top? Cheers!
great video! just bought it and I can't wait to install it on my Home Assistant, thanks :D
By the way... where did you buy the amazing posters that you have on the wall ? thanks again! ;)
Hey Paul, Love watching your videos. Have you managed to get your hands on Aqara's smart door lock as yet? I might have missed it if you do. Thats something I would be very interested in seeing a review on. Especially the HA integration side of it? Greetings from Sunny South Africa!
Cheers Paul happy Saturday. Love the FP2 but they are hard to get hold of.
Fantastic video Paul - I'm proud to be a patreon 😁👍😁.
You are a strange strange little man. And I'm here for it. Found you yesterday and subbed immediately 😂
I will use it also as Alarm detection, far better than standard alarm motion sensors. A whole new level of security
I have40+ devices with aqara and my cat triggers the alarm on this when using presence detected on co2 as trigger. and since then have a eve shortcut that sync the alarms on aqara homehub and my HomePods to play an alarm on the HomePods and switch all lights red
Unfortunately I've had a lot of trouble with mine. Multiple ghosts. I have found that mostly its leaving a zone that sometimes it will leave ghosts and not only going out of the sensor view and when I had a guest it was just got ridiculous. I have had to reset the absence status at least once per day. I have another but with how much one gives me trouble I don't even want to set the other up
Try adjusting the sensitivity in the settings and make sure it's firmware is up to date, and most importantly, once you've adjusted the settings reset the absence status. I had a ghost or two, but doing those three things got rid of the ghosts entirely. I had to try different sensitivity to get it to work, and I think I landed on the lowest setting in the end, but it works perfectly now!
I want honesty here...who else thought that the pan-down shot of the Aqara senor was Paul's bald head? Just for a second my brain wondered what the square was on his head. Lmao, I'm getting old.
Love your personality man keep the content coming…. 😂😂😂
I just received mine today, will be using them for fall detection since I have ALS/MND. Now, I just need to get someone to mount them to the ceiling for me.
Ooooh, this is gonna fix my “stumbling through the dark” issues without leaving lights on!
The FP2 is an amazing upgrade over the the first FP1 version. Aqara have just made leaps and bounds in millimetre wave technology.
I can't help but wonder what they might come up with next. The mains powered is good and bad. Sometimes it can be hard to put the sensor where you need to and hide the power cord going to it, but I can't think of any other device that does what the FP2 does. What is the delay between entering a zone and it triggering? Sorry if I missed it in the video.
Zero delay. If you watch me move to Neeshas desk in the first part of the video you'll see I don't even get to sit down before it triggers, I was kind of waiting to react in a comical way and it genuinely caught me off guard before I got chance because it reacted faster than I could possibly expect, and that's using a cloud connection to an Amazon routine!!
@@paulhibbert That is good to know. The original FP1 did have some delay. Thanks for answering :)
Hey Paul, great video, but I have 2 questions?
1) your video is showing the app where you're mapping your room out like an above view. Where are you placing the sensor where it can recognize a similar layout? Is it mounted up high or sitting on a bookshelf somewhere on a wall?
2) why does Lord Vader have the voice of C-3PO?
Love the content bud, thanks for the awesome videos!
we all look forward to Paul's words of wisdome. This product realy looks interesting.
It’s been out of stock for 2 months on Amazon now, seems to have the same availability struggles as the FP1. It’s a real bummer seeing all of these reviews and no availability.
@@ToniHintonnot any more they don’t lol.
@@davidrunacres Amazon app says they are. They appear to have a stash in a warehouse in Texas somewhere because it says I just missed the window to have it delivered tomorrow.
I just looked up my order from May and see they're currently in stock and available for delivery (for me) tomorrow morning. (In the US)
That looks cool. Does it only work in one room or can it see through walls (or indeed floors)?
The floor plan of my 3-bed house is probably smaller than that guy’s lounge, but it’s not open plan. Of course it would be nice to cover both upstairs and downstairs with as few sensors as possible, too!
P.S. I’ve already seen the comments saying that the current FW has problems. I don’t need telling again! 😉
I do miss the bait and fish slapping humor but you are still pretty funny so I'll continue watching.
It's useful and amusing
Nice vid as always. Does anyone have a link to step by steps for setting up the scenes and automations, i want to give one to my inlaws and want my spare daughter to be able to set it up for them.
Great review, triggered impulse buying and I get it the same day!
Please make use of your return policy.
The current batch on sale, has been semi bricked by a shit firmware update, that Aqara have said they'll address at some unknown point in the future. No time frames given.
Currently, ALL Reddit threads on the FP2, are about them being non usable.
This is great. Although I would of preferred a rechargeable option.
Nice. Have you looked at espresense for a more diy type experience, or even Lewis' sensor?
Lewis said he would send me one, but I think he ran out! 😮 His sensor must be amazing!!
"I Sense Something....a Presence.....One I've not Felt since...."
I guess this is an older video .. not so NOT greedy .. aqara now is adding features that are temporary, showing they are working towards a subscription so I guess the high price isn't enough. It worries me that they may decide to make the zone presence behind a paywall. The issue with ghosts is not with detection its with after detection. My kitchen has one of these sensors and I constantly have to go into the app and "ai train" it for the room to get the overhead light to shut off. It works well to turn the light on but it doesn't turn off because it seems to "keep" a presence in the room. I may have to try to reset the kitchen sensor because this is about 90% of the time and I actually decided to make a switch to turn off the automation. The presence sensor is not 100% on detecting presence if you aren't moving as it is advertised. I cant use it for my nightly routine because it will trigger the morning routine several times during the night because the bedroom sensor thinks I left the "bed" zone. I think the longest time it kept me "in bed" was 3 hours then there would be a clear for some amount of minutes and then the presence is detected again. Aqara says they are working on position sensing to identify if a person is lying down, sitting or standing but that will probably be a monthly pay to have that since they did add sleep monitoring (which I'm assuming works like crap due to the fact it cant even accurately tell that a person is still in an area) and that is listed as "limited free". I have 4 of these sensors because I thought they were going to be great but am now worried because it seems like they are too busy trying to make subscription based service and not fixing the bugs in the already overpriced product
Sadly I'm sending mine back to Amazon... I'd love to say this works well... But if I brush past my tall plants, all of a sudden another human presence is detected. They are in an interference zone, but this makes no difference. I'm also detected in the doorway after leaving the room. Both off these issues stay for at least 5mins after which no detection... Nice idea... But only practical for a reasonably sterile room!
So, Paul, how would one go about on a budget setting up a no internet required or CLOUD system for lights today? (about 7 lights and fans. PC toggling would be cool too)
I have Sengled wifi bulbs now and Alexa that is useless in outages. Also "invested BIGLY" years ago into INSTEON and all those devices died just after limited warrantee expired. So, yeah learning the hard way is a skill of itself.
Thank you for any attention and time you can spare.
Tuya zigbee, alexa & google, a second hand Hubitat Cx and either a fingerbot or enabling voice wake on lan or buy one of the little remote PC start half length cards.
dude YES, you could review the universal remotes id still watch.... It Just Works!!!
My dear good sir you have now gone from my favourite smart home youtuber to just purely a god for your looking into its pet capabilities, you could say your have become my Tom Baker of tech. If I was not on UC I would buy you not one but a nights worth of beer :)
Finally something innovative
Does it still work in Home Assistant with the Homekit integration if your internet goes down?
4:00 APPEASE THE ALGORITHMS!
Looks good, but Amazon UK sold out and don't know when it will return. Also running off the Mains when the most likely placement is near the ceiling is not ideal, long trailing wires etc
Sadly, I’m a victim of RUclips tease. I’ve been wanting one of these since release and seen loads of RUclips videos recommending it. Annoyingly, I’ve not seen them in stock once.
They're always in stock when I check, probably because I'm too broke to afford it. I just checked and it's in stock on Amazon US right now.
@@ToniHinton Thanks, Sadly it’s Amazon UK that remains out of stock.
Athom has just released an ESPHome equivalent, that IS in stock and is quite cheap.
Currently, most FP2s are unusable, due to a shit firmware update.
I just got one on a prime day deal to use in a similar way to you
thinking it wouldn't pick up my cats...if they're on the floor it doesn't but the second they jump on the sofa or there cat tree it sees them as people. It's so annoying because the sofa was a huge part of my routine planning. Of course my misses thinks it's great that she knows Luna is sat fast asleep on her side of the sofa all day but I can't setup any routines involving the sofa or the cats going to trigger them. They need to get it to work out what's a person and what's a tiny little cat having a kip.
Would it be possible to program so many zones in a DIY mm wave sensor connected to an ESP32 and HA? And maybe detecting more than one person?
Not available to buy in the Uk. Sold out. Thanks Paul
Aqara: because you already have a yacht.
If you have tuya/smartlife platform how to connect this sensor?
Can the FP2 be used with the Aqara E1 hub ?
Stu really should have had a Paul mask on that doll!
These have such great potential, the reports of ghosting do haunt me a little though
best longstanding jokes on youtube
Will these work in smartlife app and set scenes please
ROFL! At first, I was like, "who the heck is that blonde?"... Then I busted out laughing when I realized "she" was about to turn around and say "it just works!" 🤣🤣🤣
I would like to see a square version and it powered by 240 v ac so it could be permanently hardwired, but at £36 not a bad price
I sam 8:56 that you have issues with xiaomi (roborock) integration… is it since last upgrade? I have it too…
Hadn't really heard about this one before...for those of us who don't use an Aqara Hub at all, how would you set up zones only in home assistant?
Don't bother with this, at this point in time.
Most sensors sold, so far, are duds and the Aqara Reddit is full of reports of nonfunctional FP2s.
If you can wait, then please do.
If you really need a presence sensor, then Athom have just released an ESPhome version, that actually works.
Saaattuurrrdaaayyy paaaulll daaayyy! 🎉This is so ooo freekin cool
Thanks dude! ❤️
Vader sounded more like C3PO
Am I the only one that’s disappointed that this vid has a thumbnail of a game controller, but there aren’t any jokes about Bezos needing a submersible to go with all his yachts. 😜
Despite the missed opportunity, this is super exciting tech! Not only for what it does now, but for what it means for where smart homes are heading in the near future. I hope Aqara pairs this tech with a smart light bulb. Would make for an expensive light bulb, but would mean that it could be mains powered by the power supply for our light fittings, while being in a prime location to cover a room. 🤩
Does it work with Hubitat?
0:59 Never disappointed😂
5:00 And.......why does Stu have a blow up Paul Hibbert doll???🤔
Does it work with IFTTT or is there a way to integrate it with Smartthings?
Aqara sensor: Finally a SMART device! So far everything is just dump sensors, invented many years ago, just used in a new way.
The problem is: "Aqara Presence Sensor FP2: Currently unavailable. We don't know when or if this item will be back in stock." :(:(:(:(:(
Be careful Paul, if Aqara ever want to be rid of you they might ask you to review their smoke alarms. Don't fall for it!
With such a low power consumption it’s odd that they didn’t add a rechargeable battery inside like some pir motion sensors do, they last a while before needing to charge
I'm so curious about that chair on the left. 😮Where did you find that one please?
In case some others wonder the same thing, it's a Kinnls Cameron chair. ^^
regarding Google stuff worthy of the bin... I would if Jeff 'not enough yachts' Besoz would recognise Dutch is a language too... Sadly it still isn't available in Echo stuff... and my missus (bless her heart) still isn't sold on the whole automation, let alone having to speak English to a device.
like quite a few other people i've got problems with ghosts .... it worked quite well in the beginning but since the firmware update to 1.1.7 it has become rather unreliable :-( if it works then it's great - if it doesn't - it sucks!
Oh a missed opportunity in that blooper.
'Good, Good, Exactly as intended, come youngling to the dark side'
I'm glad the screenshot wasn't the video. I was in two minds whether I wanted to even watch it.
Better late than never to review this.
No one has used this outside. I think it would be great to sense people approaching your front door from 8 meters away and start streaming your camera to a smart display.
With Google you can trigger routines when a light or plug is turned on.
I bought the Aqara cube thing to turn stuff on and off and such by turning the cube up/down/left/right but I could never get it to pair with my wi-fi because it needed ONLY 2.4 but was confused by my wi-fi 5g channel, is this product going to have the same problem?
Do you have the same SSID for both 2.4 and 5GHz networks? Lots of devices get confused if they're the same. Mine are named separately with _2.4G and _5G. Also, if you're using your phone to set up devices like this, you'll want to be connected to the 2.4GHz network during setup.
I know these are sold out everywhere, but how much were they when they were in stock please?
Not selfless, wallet enhancing. The more it can work with, the more value it has and the more they'll sell. Something Cr-apple will never understand. In other news, cancer necrosis/thrombosis is fun...
I have an interesting new little gadget set up. A bank of x large PSU fans can be found for "cryptomining machines". I have a bank of three that are jammed into a window (using the central latch as a support) so they act as an air pump controlled by a smart socket.. Makes a lot of difference. The fan speed is adjustable by controller too.
PS will be testing the new zigbee fingerbot they've just bought out. Hopefully this one will last more than 11 months (all the insides on the previous one being plastic that's edam with delusions of grandeur) . It's going to be having hugs with my tuya astromech. 😂
On the one hand this being powered through USB is great, as there's nothing more annoying than having something like this that you're probably going to want to position somewhere a bit hard to reach to cover the space properly running out of battery every 5 minutes and needing to be changed.
On the other hand, if you want to put it in a room you've not long decorated, having the option to battery power it would be great so you don't have to either have to pay to get a plug installed somewhere to plug a USB power into to run this thing, or end up with cables running up the walls...
Also, this does presence and light but not temperature?
Do you have to use the Aqara app to get the custom zones such as Xbox and sofa? Or is that functionality available in home assistant?
You need the app to do that unfortunately. If you are concerned about privacy you can just set up any random email address in gmail and sign up to the aqara app with that
£82 😮. I'd like one if they were available, but I'll wait until they are £20 on AliExpress.
Is it compatible with tuya?
Do you think it would work with Hubitat?
Hmm, good question! The FP1 had a driver written specifically for it by the community, so I strongly suspect one will be written for this if the FP1 driver doesn't already work. This is a lot more popular than the FP1 was
😊
@@paulhibbert Good point, the community is thriving on Hubitat!
Watched the entire video. I'm confused... Can you use multiple of these sensors with overlapping coverage areas?
... or one per room?
At this point in time, you should stay away from these, as they've been semi bricked by a shit firmware update.
Currently, every single Reddit thread on the FP2, is about them being more or less nonfunctional.
Just got one. Will have to try
Prepare for a major disappointment.
A shit firmware update has rendered most FP2s unusable and there's no timeframe for a fix, outside of china.
@@user-xu2pi6vx7o it's working decently right now. Main issue is the light sensor seems to not be working properly at all. A lot of times it just sits at 47 lux.
Also this reminded me how scummy IFTTT is with their pricing model. Going to have to get myself a Home Assistant to properly utilize this thing
Currently unavailable on amazon, sad times....
Mid-July they reckon. Keep your eyes peeled!
Subscribed just because i seen Destiny 2
I'm just starting to get into smart home tech. Just researching a specific problem, how to make sure when my dad gets up in the middle of the night, the bathroom light turns on. He is older, and has dementia. He also takes sleeping pills, so when he happens to get up, sometimes multiple times a night, to go to the bathroom, I've wanted to light his way. He sometimes forgets to turn on the light....and that causes some issues at times. I got that done in the hallway with a cheap motion activated light I bought at the grocery store....but, well, he moves so slow...the motion sensor doesn't trigger a lot of the time. Not joking. It's like he's Robert Redford in Sneakers trying to get the cryptographic box. Except, he's just that slow, especially at night. And I've found that he can actually defeat the cheap motion sensor.
The fall detection...is actually a very useful feature for me. Wondering how well it would work for my purposes.
Local only is great...but even I, the guy who is just starting to get smart home going, has a power switch for his modem to turn off the internet...guess that's not as amusing as disconnecting your cable :P
Definitely considering this for my problem....and this opens up many other possibilities for things to do in the future. Forced to start slow as we have limited funds. So I'm thinking of small projects to solve specific problems. My dad just forgetting to turn on the light is prime for the helpfulness of the fp2. Detecting sleeping vs standing is also a potential for him, as he frequently, again in the middle of the night, gets up and doesn't bother to turn on the light to see where he's going.
I think this will be great however, there’s a few options you can use to try and do the automation you are talking about. Bellman do some pressure sensors for mattresses that you can use to trigger automations based on wether he has gotten into bed or out of it.
A much simpler solution would be a motion sensor that is positioned low and will only pick up motion when he steps his foot out of the bed, then turn on the light until he gets back into the bed.
There’s many ways you can pull this off.
How did you get your Xbox integrated in your smart home?
Of which no one has ever thought...
1:13: good thing you’re not in Florida, or you’d be illegal
saying not available on amazon :-(
Why did Vader sound like Bungle from rainbow???
Who has some good ideas to hide the wire if we are mounting it high
I would say a cupboard with shelves in it, just drill a hole in the cupboard to run the cable to a socket behind the unit. Or on top of a cabinet is probably even easier.
@@paulhibbert if only, but there will be a door there haha, need a good wire that will be long enough and thin enough
It works nicely until it starts failing ... (Ghosts, Lost connections ...)
Hi Guys, does anyone know if the FP2 can trigger routines based upon how many people are in a zone at any one time? For example, if more than two people sit at the dining table, can specific routines can be triggered? Romantic lights and music perhaps? Or more practically, setting the lighting just right for eating dinner with the family? I can see this having some amusing results lol!
I watched the Smart home solver video recently. Eerily simular to my post! It does what I hoped it would.
Currently unavailable.
We don't know when or if this item will be back in stock.