Hi friend! What about a short demo with a real acoustic guitar? I'm interested in something for trubadour gigs without spending 300 euro for a Fishman Tone DEQ AFX and I'm thinking that I'm not the only one looking for that solution. Maybe you can suggest also a chain effects to pair with the Stageman Acoustic Amp and an easy way to activate delay and booster in live situations. Thank you and best regads, Dorian Andersen - Oslo, Norway.
Merci beaucoup for your explications! The manual is so poor, I don’t really understand the functions but your videos helps me really!! Thank you, 👍🏻 good job Louis from France
Hi! Great video! When i enable the loopback option in repaer it just stays the same as when it was disabled. Sound from the loop and drums just isnt detected by reaper
I updated the firmware and now tuner doesnt work. I can enable it but it has no feedback at all. Also, i could not turn off the drum machine so i had to plug off the unit. Really weird, anyone has these issues with this last firmware?
Hello, I have a problem with my nux mg300, I correctly updated the new version, the problem is that when I go to connect to the power to test the pedalboard, it does not turn on, it does not emit lights
Ciao piacere di seguire il canale.Purtroppo ho aggiornato il Firmware all'ultima versione e il NuxMG300 non accende più.Cosa è potuto succedere?Chiedo urgentemente qualche risposta.Grazie
Hello, pleasure to follow the channel.Unfortunately, I updated the Firmware to the latest version and the NuxMG300 no longer turns on.What could have happened?I urgently ask for some answers.Thanks
Whit this new update i had encountered one problem, when I use reaper and both screens at the same time ( interfaces) it record fine but i soon I try to change settings like volume or any change cabinets or any change the nux crash it say sistem not responding what I did wrong.?
Hi just one question, does this have a direct load function? For example , i want to switch from patch 1 to patch 4 but i dont want to hear patches 2 and 3. My very old zoom 505 can do this.😊
@@ThePedalGuy This is something I never understood. This feature has been around since the 505 II model (year 2002!!!) This means that Zoom's multi-effects pedals (for beginners) are from that time until today the only ones that can be used easily live. This feature has possibly been patented, there is no other logical answer to that. 🤔
hi, my quick tone programme will not start, i have tried various usb 'data' cables, it has a pink 'x' in the top left hand corner when it tries to start, but doesnt get any further than that....i have uninstalled the drivers and reinstalled them , but it still wont work.....when i look in ''devices'' it all looks ok. and i have sound, but no quick tone...im running windows 7. any help would be appreciated. thanks .
Hey man, great preset. I have a question? Can you adjust stageman to sound more like a classical guitar with nylon strings? If not, it sure would be cool for nux to make such sound.
Can you please clarify the "Loopback" description? "Mixes MG-300 audio signal with any audio from a streaming source"?? Where does the streaming source come in? Via the Aux jack or mixed with the USB signal? It doesn't seem to fit into the diagram shown for the settings.
Maybe this will help. "Loopback is a convenient function for broadcasting over the Internet. It mixes the input audio signals with the audio signals playing back in the software in the computer into two channels in the MG300, and sends them back to the computer"
@@ThePedalGuy Thanks, I've experimented and think I have it worked out. In Normal (no loopback) the guitar signal with all FX applied is routed out via USB to PC, and also continued through the signal chain where USB In and Aux in are also mixed in, before going to external amp/speaker/headphones. In Normal with Loopback, the guitar signal with all FX applied is mixed with the USB In signal before being routed out to USB Out. I think the settings dialog should have two separate diagrams for the Normal with and without loopback.
Hi again PG .. odd question..do you know a way to RESET all the USER presets..back to the FACTORY ones? I tried re'installing firmware - which didnt do it. thx !!
Never mind... found it in another youtube vid ! Press simultaneously EDIT/EXIT and SAVE on the unit, HOLD, you see factory reset option .... (Video : ruclips.net/video/upufZQHJqSc/видео.html
anybody else having issues opening up the NUX support page...tried both laptop and tower computers...cannot get the site to open to run the updater for my NUX-300...wtf? all my other web pages open fine???
Hi! I bought my devide 2 days ago. Does anyone else has a problem with using the device with headphones? It seems like the default sound is too quiet compared to the effects' additional sounds. Pretty much its unplayable for me through my headphones (ath m50x). Even some of the default patches do not work corretly. It sounds great with an amp though. Love the content!
@@ThePedalGuy Thanks :) I went to the store yesterday, they said I should choose a low impedance model. We tried out a few (like ath m30x, m50x) which worked perfectly. However my brother's headphones has lower inpedance (denon ah gc30) then what we tested in the store and it doesnt work, so I still understand nothing :/ Maybe I will just choose one of these to be sure
I updated my NUX MG-300 firmware last night and I noticed today, none of the Chorus effects appear to be working. Other modulations seem ok, just no Chorus. The Pedal Guy, I was wondering if you could confirm your Chorus effects are still working? Try adding the chorus effect to an acoustic patch. Thanks.
@@thanchanit6673 Not sure, but thanks for confirming. I guess it wasn’t just me. I may try to go through the upgrade process again and also email NUX support.
@@thanchanit6673 I powered by MG-300 back up to test and see if it was still doing the same thing with the chorus not working and it worked fine tonight for me. Maybe it had something to do with testing it right after I upgraded?? Maybe it need a full power down and power up to get tings back in order, tough to say but none the less, mine is working now. Give yours a try and see if the issue persisted or not.
Hi thr pedal guy, thanks for this video i was seriously waiting for this acoustic IR kinda update. ->Can plz tell me does is has the undo/redo looper feature? Im a beginner and im planning to buy this one. Ive seen all ur videos related to mg300 and i think its value for money. Keep informing us the new upcoming features of this model thank u very much ❤️
Hi ive a small request like if possible can u make a video (shorts or small video) on looper of mg300 just like u did for mg30 😀..cuz no YTbr has done it Then it'll help all the beginner's like me to figure out the function
Awesome update, speaking of modes..I've been thinking of ditching my modeling amp because it's kinda redundant. I checked studio monitors but apparently they are too expensive. What do you think about getting a guitar cab(without head) and using the mg 300 as the head?
Thanks. Unfortunately that probably won’t work as you need some sort of preamp and power amp. You could use something like a Hotone loudster to make that work.
Hi, I hope you're doing well. Would you recommend the nux MG 30 or the hotone ampero one? Also which one of those would have a good wah wah integrated? As well as a good pitch shifter (for drop tuning)
Hello. I have a big question regarding the v.3.10.13 update. With the download, the warning message appears: "[WARNING] The firmware below is ONLY for the GLOBAL VERSION MG-300. If you are using the DOMESTIC VERSION (only available in mainland China)". How can I be sure that my Nux MG 300 supports the firmware? Thanks.
Very good guy. However, I have a question. Is this NUX Jazz JZ Chorus the same one that comes with the NUX mini go loader??? I only play a clean sound with little reverb The Mini Pulse is very good and also has acoustic IRs, but the MG has beats, a noise looper and a compressor. I don't know if the NUX 300 has Ambience. If you could say hello I would appreciate it ok🎉🎉🎉 Like and subscribe Thanks
What pisses me off about the Chinese manufacturers, is that the total volume of hardware is equivalent to about $40 on a good day, but they can't expend the energy or $ to make actual drivers that work between operating systems on a product they retail for $200. it's abysmal to the point I wouldn't bother buying another product from them, regardless of how good the modelling is. An old adage says: Buy cheap/Buy twice. And we all know China is cheap AF. I have an MG300 and it sounds great...(amazing actually for the $.....audibly better than the hd500X on rectifiers), but try and record without an intermediate interface and you may as well forget it. Contrast that with the seamless experience with the Line6 products I have. My HD500X worked as a soundcard and an interface flawlessly, with no noise or issues. The NUX can't even connect to the computer without a Google search and installing 'wrong' drivers and then you can connect to the editing software but forget about recording anything. Nothing but noise. Do you go direct from the MG300, or into an interface?
Just want to say thank you for keeping us informed. You are the man and we certainly appreciate you.
Appreciate the kind words
I just got one of these for $90 used and I’m completely happy with it.
I have a JCM2000 DSL100 and the model is pretty darn close to it.
Nice
Thank you very much for the preset, it sounds great .
Thanks
Great video, thank you Mr. Pedal guy!
My pleasure!
Question, I can't find any info about it being stereo or not.
Still missing the freeze reverb effect, just like the one added on the last firmware update of the Mg30. Hope they do the same for the Mg300
Hope so. That would be great!
Have they released any more updates after this.? I wish they give more types of compressors in the next update.
Nothing yet, but you never know...
Nice Job bro
THX
Hi friend! What about a short demo with a real acoustic guitar? I'm interested in something for trubadour gigs without spending 300 euro for a Fishman Tone DEQ AFX and I'm thinking that I'm not the only one looking for that solution. Maybe you can suggest also a chain effects to pair with the Stageman Acoustic Amp and an easy way to activate delay and booster in live situations. Thank you and best regads, Dorian Andersen - Oslo, Norway.
Thanks for the suggestion. I'll try to do that at some point.
Merci beaucoup for your explications! The manual is so poor, I don’t really understand the functions but your videos helps me really!! Thank you, 👍🏻 good job
Louis from France
Happy to help
I hope NUX gives us at least a synth pedal and volume swell(like the Boss slow gear) for the MG-300.
Would be great!
Hi! Great video! When i enable the loopback option in repaer it just stays the same as when it was disabled. Sound from the loop and drums just isnt detected by reaper
I updated the firmware and now tuner doesnt work. I can enable it but it has no feedback at all. Also, i could not turn off the drum machine so i had to plug off the unit. Really weird, anyone has these issues with this last firmware?
Have you tried a factory reset after installing the update?
Had same problem with drum not stopping as well..
Hello, I have a problem with my nux mg300, I correctly updated the new version, the problem is that when I go to connect to the power to test the pedalboard, it does not turn on, it does not emit lights
Yikes. I'm not sure how to advise here. Have you reached out to NuX?
Holaa...existe un firmware o actualizacion para la version china????
Has encontrado algo??
Ciao piacere di seguire il canale.Purtroppo ho aggiornato il Firmware all'ultima versione e il NuxMG300 non accende più.Cosa è potuto succedere?Chiedo urgentemente qualche risposta.Grazie
Hello, pleasure to follow the channel.Unfortunately, I updated the Firmware to the latest version and the NuxMG300 no longer turns on.What could have happened?I urgently ask for some answers.Thanks
Strange. I would recommend reaching out to our support to see if it needs service.
Whit this new update i had encountered one problem, when I use reaper and both screens at the same time ( interfaces) it record fine but i soon I try to change settings like volume or any change cabinets or any change the nux crash it say sistem not responding what I did wrong.?
Not sure how to advise other than to contact NuX support
Hi just one question, does this have a direct load function? For example , i want to switch from patch 1 to patch 4 but i dont want to hear patches 2 and 3. My very old zoom 505 can do this.😊
Sorry no it doesn't do this yet.
@@ThePedalGuy This is something I never understood. This feature has been around since the 505 II model (year 2002!!!) This means that Zoom's multi-effects pedals (for beginners) are from that time until today the only ones that can be used easily live. This feature has possibly been patented, there is no other logical answer to that. 🤔
hi, my quick tone programme will not start, i have tried various usb 'data' cables, it has a pink 'x' in the top left hand corner when it tries to start, but doesnt get any further than that....i have uninstalled the drivers and reinstalled them , but it still wont work.....when i look in ''devices'' it all looks ok. and i have sound, but no quick tone...im running windows 7. any help would be appreciated. thanks .
It might be a usb conflict. I would reach out to NuX support for more info
Hi i had the same problem as you, i bought a usb cable for data transfer and it started working right away.
@@markblack5015 excellent, i have ordered a ''data'' usb cable, so we will see...cheers man
@@100roberthenry I'm glad I could help
guys i have the old version of nux mg300, do i need to update it to make Quick tone work?
MG 300 has some great guitar tones but I was disappointed that many from the mg100 were missing.
Hey man, great preset. I have a question? Can you adjust stageman to sound more like a classical guitar with nylon strings? If not, it sure would be cool for nux to make such sound.
I connect it to headphones and it clips, i connect it to my front combo and it clips too
Pedal Guy, do you know whether the newest update of the MG300 also has the auto record for the looper, like the MG30 has?
I need the firmware for the domestic version of the nux mg 300... can anyone help me ?
It's on the NUX site.
Can you please clarify the "Loopback" description? "Mixes MG-300 audio signal with any audio from a streaming source"?? Where does the streaming source come in? Via the Aux jack or mixed with the USB signal? It doesn't seem to fit into the diagram shown for the settings.
Maybe this will help. "Loopback is a convenient function for broadcasting over the Internet. It mixes the input audio signals with the audio signals playing back in the software in the computer into two channels in the MG300, and sends them back to the computer"
@@ThePedalGuy Thanks, I've experimented and think I have it worked out. In Normal (no loopback) the guitar signal with all FX applied is routed out via USB to PC, and also continued through the signal chain where USB In and Aux in are also mixed in, before going to external amp/speaker/headphones. In Normal with Loopback, the guitar signal with all FX applied is mixed with the USB In signal before being routed out to USB Out. I think the settings dialog should have two separate diagrams for the Normal with and without loopback.
Can this be used out of the box without a firmware update immediately,?
Yes
Hi, this pedal have a fuzz face effect or other fuzz?
No fuzz. Sorry
Hi again PG .. odd question..do you know a way to RESET all the USER presets..back to the FACTORY ones? I tried re'installing firmware - which didnt do it. thx !!
Never mind... found it in another youtube vid ! Press simultaneously EDIT/EXIT and SAVE on the unit, HOLD, you see factory reset option .... (Video : ruclips.net/video/upufZQHJqSc/видео.html
Hi, does the patch level function, set level of all sounds in a patch if I set em all to same level. eg patch 9a, 9b, 9c and 9d ?
Is this processor good for bass guitar?
Not really. The mg30 might be a better solution as that includes bass models
I updated to v3 and tuner not working
That’s a bit vague. Can you elaborate
anybody else having issues opening up the NUX support page...tried both laptop and tower computers...cannot get the site to open to run the updater for my NUX-300...wtf? all my other web pages open fine???
Hi! I bought my devide 2 days ago. Does anyone else has a problem with using the device with headphones? It seems like the default sound is too quiet compared to the effects' additional sounds. Pretty much its unplayable for me through my headphones (ath m50x). Even some of the default patches do not work corretly. It sounds great with an amp though.
Love the content!
I would check the impedance of the headphones. That plays a vital role.
@@ThePedalGuy Thanks :) I went to the store yesterday, they said I should choose a low impedance model. We tried out a few (like ath m30x, m50x) which worked perfectly. However my brother's headphones has lower inpedance (denon ah gc30) then what we tested in the store and it doesnt work, so I still understand nothing :/ Maybe I will just choose one of these to be sure
Greates videos Pedal Guy!!! You know if that update it's going out to china versión? Thanks!
There are some specific instructions for the China version on the NuX site. Be sure to read those first.
@@ThePedalGuy Thanks Pedal Guy! I'll check it.
how great would that accoustic setting sound is you just plugged in an accoustic guitar ?
It would work just fine with an acoustic.
@@ThePedalGuy know that - that is what i ment, it sounds incredible....
Does it have a Acoustic simulator pedal included? Compressor hmis only one pedal, nothing more to choose
Hey bruh where can download the software??
You can get it at nuxefx.com
@@ThePedalGuy thanks bruh
I updated my NUX MG-300 firmware last night and I noticed today, none of the Chorus effects appear to be working. Other modulations seem ok, just no Chorus. The Pedal Guy, I was wondering if you could confirm your Chorus effects are still working? Try adding the chorus effect to an acoustic patch. Thanks.
I will check it out
@@ThePedalGuy Thanks, much appreciated.
Me too , What should I do?
@@thanchanit6673 Not sure, but thanks for confirming. I guess it wasn’t just me. I may try to go through the upgrade process again and also email NUX support.
@@thanchanit6673 I powered by MG-300 back up to test and see if it was still doing the same thing with the chorus not working and it worked fine tonight for me. Maybe it had something to do with testing it right after I upgraded?? Maybe it need a full power down and power up to get tings back in order, tough to say but none the less, mine is working now. Give yours a try and see if the issue persisted or not.
Hi thr pedal guy, thanks for this video i was seriously waiting for this acoustic IR kinda update.
->Can plz tell me does is has the undo/redo looper feature?
Im a beginner and im planning to buy this one. Ive seen all ur videos related to mg300 and i think its value for money. Keep informing us the new upcoming features of this model thank u very much ❤️
Thanks for watching. Yes the looper has an undo/redo function.
@@ThePedalGuy ❤️thanks pedal guy for replying
Hi ive a small request like if possible can u make a video (shorts or small video) on looper of mg300 just like u did for mg30 😀..cuz no YTbr has done it
Then it'll help all the beginner's like me to figure out the function
@@subsins1063 I’ll see what I can do. Lots on the schedule at the moment
@@ThePedalGuy ya sure 🤘
After upgrading to v3 I got few 'bugs', eg sound stacks when playing along with aux in, tuner not responsive/jerky movement and some other...
Hey my nux mg 300 is clipping, and i dont know what it is
NUX MG-300 or Mooer GE100??
Awesome update, speaking of modes..I've been thinking of ditching my modeling amp because it's kinda redundant. I checked studio monitors but apparently they are too expensive. What do you think about getting a guitar cab(without head) and using the mg 300 as the head?
Thanks. Unfortunately that probably won’t work as you need some sort of preamp and power amp. You could use something like a Hotone loudster to make that work.
@@ThePedalGuy ohh I see thanks for the reply, that's too bad I thought I can take advantage of the amp and cab simulation without an amp head
You can get good cheaper powered monitor for less than a 4 X 12 cab ! Kali LP 6 for example !
You can use a acoustic amp, keyboard amp, or powered FFFR cabinet. You may be able to get away with a powered pa speaker even.
@@pastorkev777 very true
Hi pedal guy!!! Do you think it's necessary to restore factory settings to Update my mg300? Thanks!!!
Not at all
@@ThePedalGuy thank you so much!!!
@@RafaelLinero77 No problem. As a precaution I would back up any presets you may have created prior to updating though.
@@ThePedalGuy absolutely, I have all my presets in my computer
@@ThePedalGuy hey man, thank you so much for answer, so helpful, I like your videos!!!
Hi, I hope you're doing well. Would you recommend the nux MG 30 or the hotone ampero one? Also which one of those would have a good wah wah integrated? As well as a good pitch shifter (for drop tuning)
Hello. I have a big question regarding the v.3.10.13 update. With the download, the warning message appears: "[WARNING] The firmware below is ONLY for the GLOBAL VERSION MG-300. If you are using the DOMESTIC VERSION (only available in mainland China)". How can I be sure that my Nux MG 300 supports the firmware? Thanks.
the global version has white knobs while the china one has silver / chrome knobs
Tuner not working after update, what to do?
I would suggest contacting NuX support. You might also refer to the MG300 FB groups. Lots of helpful people there.
20 mins for an update download takes about 5 on my Helix !
🤦🏼♂️
What can i do?
Very good guy. However, I have a question. Is this NUX Jazz JZ Chorus the same one that comes with the NUX mini go loader??? I only play a clean sound with little reverb The Mini Pulse is very good and also has acoustic IRs, but the MG has beats, a noise looper and a compressor. I don't know if the NUX 300 has Ambience. If you could say hello I would appreciate it ok🎉🎉🎉 Like and subscribe Thanks
Aand i dont have a windows pc, so i cant connect it to a pc also
Btw thanks
when will you use a better mic
🤷♂️
Hello. Please meake english tekst in your all videos.
What pisses me off about the Chinese manufacturers, is that the total volume of hardware is equivalent to about $40 on a good day, but they can't expend the energy or $ to make actual drivers that work between operating systems on a product they retail for $200. it's abysmal to the point I wouldn't bother buying another product from them, regardless of how good the modelling is. An old adage says: Buy cheap/Buy twice. And we all know China is cheap AF.
I have an MG300 and it sounds great...(amazing actually for the $.....audibly better than the hd500X on rectifiers), but try and record without an intermediate interface and you may as well forget it. Contrast that with the seamless experience with the Line6 products I have. My HD500X worked as a soundcard and an interface flawlessly, with no noise or issues. The NUX can't even connect to the computer without a Google search and installing 'wrong' drivers and then you can connect to the editing software but forget about recording anything. Nothing but noise.
Do you go direct from the MG300, or into an interface?
Sorry but I’m not inclined to help someone that states such ridiculous and borderline racist nonsense. I’m sure you can figure it out on your own.