Hello NUX, thank you for the useful update! anyway, i hope the 2 foot switches will have extra functions like turning on or off certain effects (perhaps a long press?) so that we don't have to create 2 different patches just for solo and rythm parts. A same patch with a delay and a booster that can be turned on or off with a foot switch would be great especially during the gig on a stage!, regarding to the very limited number of patches that we can store in this device😊 . MG 300 users please like this comment! we need that, don't we?
Totally! and also being able to assign to the expression pedal different fx parameters than the pre established ones. For example: If I want to assign the expression pedal to the delay fx, the pre established parameter that the pedal will be assigned to is the "mix". However, pretty interesting thing could be done if it could be assigned to the "time" parameter, or to the decay of the repeats, or to the "tone". You get the idea.
For those who get “device not found” even with the correct usb cable, try this. This worked for me. 1. Unplug the device from pc, leave the power on. 2. Install driver on pc. when it is finished, plug in the device BEFORE clicking finish button. (If it is plugged in the whole time or not plugged in, it will say you need to unplug device to finish install and ask you if you want to finish later) 3. Power off device, keep usb connected with pc 4. Open firmware update on pc 5. Press two foot switch, and connect mg-300 to power. Device will say firmware updates on its screen. 6. Voila! Firmware updater will say it is connected. This method worked for me!
hi i cant get the quick tone editor to start...i have installed the drivers and programme, but it still asks me to plug in usb, which i have done.. it is a usb data cable.....i am on windows 7. when the quick tone editor tries to start ther is a pink cross in the top left corner.....what should i do ??... i have checked ''devices'' on my pc and all 3 drivers show up, and say they are working. thanks. what to do?
Hello to all owners of the fabulous MG300. Can anyone please send me the link of the penultimate firmware, because the recent version 3.0 is not accepted by the device sender. Thanks a lot
Just got this pedal today and I freaking love it! Easy looper and drum beats wooohooo my own little band in a box. I plug my guitar to the input and the output to the effects return on my amp with the mode set to combo rear and it sounds fantastic. The only thing it lacks compared to much much more expensive versions is the touch sensitivity, but it's still good enough on this one for noodling around.
I really need help🥺 I downloaded Quicktone, pedal is connected to PC properly, but Quicktone doesnt work... It still says 'please connect the modular with USB'
I have updated my firmware on the MG-300 to the most recent version, but now it is not being recognized by QuickTone editor. I don't see anywhere to download the older versions of the firmware or the QuickTone editor, so I'm stuck and can no longer use it. Can anyone help me?
Good night...help me there... I would like to know how to recover the effects of my NUX MG-300, I went to update the Firmware I didn't save the effects, now it doesn't want to connect
When trying to update the firmware to V4.02.23 of May, 15th 2023, the MG (global version) stopped emitting sound with most of the patches! I've boiled it down to the "NUX Device Updater.exe" in the recent "Firmware_NUX_MG300_EN_Windows_V4.02.23.zip". This updater seems to be faulty, I need help pls
It would be great if I could change it to a tap tampo switch by pressing one pedal for a long time. and set tabtempo time by global or preset. I need a foot switch for tap tampo. Please do it if possible through firmware.
Thank you! Very useful! Could you tell me the link to register my MG 300 and also to load "Logic Pro X"? And, is it necessary to have a sound card for that? THANK YOU :)
The REALLY annoying thing with the MG300 is that when you use it as an audio interface with your computer, the audio cuts out intermittently. If they would fix this issue, I'd rate it five stars. Otherwise it’s almost useless to me.
No puedo importar los datos de la pedalera ya que la versión de quick tone es más actual y no me deja entrar, solo reconoce la pedalera. No sé si hay una versión antigua de quick time para poder hacerlo o hay otra solución. O solo actualizo la pedalera sin hacer el primer paso. Pd: mi PC tiene los drivers y ni así funciona
I tried the update today and even after recalibrating the pedal, I have no sound. It seems I have no input because the tuner isn't seeing anything either. One thing though, when the updater tellms me to the update is finished, the screen on the MG300 is still showing updating and the green bar isn't full ; almost full but not entirely. Any thoughts ? Thx
Hi, I got one a couple of weeks ago. One thing you probably allready read is that the data cable must be a good one. Then you probably want to leave the green bar a couple of minutes more so it can finish the setup?? One thing I got wrong from the start was the pedal calibration!! is always the same button!!
@@lukaszbohdal8749 yes, i assumed i had to install the driver first. But its just not found by the PC. Only two logical reasons. Cable or unit fault. The illogical one, some strange setting.
Some people has issue after update, like the unit suddenly has no sound, they have to calibrate the pedal, after doing the calibration the unit is back again (has sound), but the sound of the amps an everything is different. So are this update final or still beta ? Thnks
Hello NUX, thank you for the useful update! anyway, i hope the 2 foot switches will have extra functions like turning on or off certain effects (perhaps a long press?) so that we don't have to create 2 different patches just for solo and rythm parts. A same patch with a delay and a booster that can be turned on or off with a foot switch would be great especially during the gig on a stage!, regarding to the very limited number of patches that we can store in this device😊 . MG 300 users please like this comment! we need that, don't we?
Totally! and also being able to assign to the expression pedal different fx parameters than the pre established ones.
For example:
If I want to assign the expression pedal to the delay fx, the pre established parameter that the pedal will be assigned to is the "mix". However, pretty interesting thing could be done if it could be assigned to the "time" parameter, or to the decay of the repeats, or to the "tone". You get the idea.
@@lorenzopasquet9438 definitely! Hope that NUX will notice and consider our comments... 🤘
Its the most best pedal in the market😎🔥🔥
Actually you don't need to use "most" after you said "best"
Thank you so much because after the updating of the firmware = NO SOUND !!! PANIC !!!: And.... I see your video and I was saved !!!
Thanks for this video Monk. Nice improvements 👍
This tutorial is really good ! I was wodering why my effect has no sound. Now I can fix it. Thankyou !
same thing for me . I was in panic
Nice. I really love this update. And please put Whammy on the Wah block. So we can choose between Wah or Whammy. Thank you so much.
For those who get “device not found” even with the correct usb cable, try this. This worked for me.
1. Unplug the device from pc, leave the power on.
2. Install driver on pc. when it is finished, plug in the device BEFORE clicking finish button. (If it is plugged in the whole time or not plugged in, it will say you need to unplug device to finish install and ask you if you want to finish later)
3. Power off device, keep usb connected with pc
4. Open firmware update on pc
5. Press two foot switch, and connect mg-300 to power. Device will say firmware updates on its screen.
6. Voila! Firmware updater will say it is connected.
This method worked for me!
i just buy MG300. I have connected the MG300 to my Mac by USB but the updater show "No device found". What can I do?
Hi, im updating the firmware but the progress bar got stuck. Its been a while since I've started the update. What should i do?
Hoping NUX will include"two rock amp"on their next firmware update
hi i cant get the quick tone editor to start...i have installed the drivers and programme, but it still asks me to plug in usb, which i have done.. it is a usb data cable.....i am on windows 7. when the quick tone editor tries to start ther is a pink cross in the top left corner.....what should i do ??... i have checked ''devices'' on my pc and all 3 drivers show up, and say they are working. thanks. what to do?
I hope NUX will make a multi effects product that only simulates amps and cabs 😁
Really hope you could apply the smart tap for tap tempo feat on one of the footswitch, like you did on nux tapecore deluxe on next update. 🙏😁
Hello to all owners of the fabulous MG300. Can anyone please send me the link of the penultimate firmware, because the recent version 3.0 is not accepted by the device sender. Thanks a lot
You saved my life !!
Great product!
I need the firmware for the domestic version of the nux mg 300... can anyone help me ?...or old Version...please
Thanks, much needed
Just got this pedal today and I freaking love it! Easy looper and drum beats wooohooo my own little band in a box. I plug my guitar to the input and the output to the effects return on my amp with the mode set to combo rear and it sounds fantastic. The only thing it lacks compared to much much more expensive versions is the touch sensitivity, but it's still good enough on this one for noodling around.
Thanks for this video.
I really need help🥺 I downloaded Quicktone, pedal is connected to PC properly, but Quicktone doesnt work... It still says 'please connect the modular with USB'
Thanks for sharing! Which Micro USB cable do I need for it?
I have NUX MG-300, but when I connect it to my PC why it's read NUX MG-30? so I can't export my preset. any solution?
I have updated my firmware on the MG-300 to the most recent version, but now it is not being recognized by QuickTone editor. I don't see anywhere to download the older versions of the firmware or the QuickTone editor, so I'm stuck and can no longer use it. Can anyone help me?
Did you grab the latest Quicktone as well? They need to be the same version.
Good night...help me there... I would like to know how to recover the effects of my NUX MG-300, I went to update the Firmware I didn't save the effects, now it doesn't want to connect
that what i need.tq bro
Hello NUX, my Mg-300 can't connect to quicktone editor, it's only can connect to PC to update firmware, help please
I'm having the same issue, were you able to fix it?
@@Low_violin nope, until today i can't resolve this problem
i saw acoustic sim on 9D is that real acoustic sim??
Quando será o lançamento da NUX MG-30???
Q1 ～ Q2.
When MG-30 arrives in Brazil?
When trying to update the firmware to V4.02.23 of May, 15th 2023, the MG (global version) stopped emitting sound with most of the patches!
I've boiled it down to the "NUX Device Updater.exe" in the recent "Firmware_NUX_MG300_EN_Windows_V4.02.23.zip".
This updater seems to be faulty, I need help pls
Make sure to factory reset your MG-300 and recalibrate the expression pedal.
Hello NUX, why my nux mg 300 suddenly didn't want to turned on?
It would be great if I could change it to a tap tampo switch by pressing one pedal for a long time.
and set tabtempo time by global or preset.
I need a foot switch for tap tampo.
Please do it if possible through firmware.
My MacBook Pro does not recognise MG-300. Please help
Thank you! Very useful!
Could you tell me the link to register my MG 300 and also to load "Logic Pro X"? And, is it necessary to have a sound card for that? THANK YOU :)
my nux mg300 can't turn on after i unplug & replug the adaptor, how do i solve this?
Oprogramowanie NUX Quick Tone™ Editor nie działa
QuickTone editor not recognized by my Mac. Very disappointing.
Please give us a firmware update with a synth pedal!
The REALLY annoying thing with the MG300 is that when you use it as an audio interface with your computer, the audio cuts out intermittently. If they would fix this issue, I'd rate it five stars. Otherwise it’s almost useless to me.
the troubleshooting for this issue, you can use extra external soundcard
yes...exactly
No puedo importar los datos de la pedalera ya que la versión de quick tone es más actual y no me deja entrar, solo reconoce la pedalera.
No sé si hay una versión antigua de quick time para poder hacerlo o hay otra solución.
O solo actualizo la pedalera sin hacer el primer paso.
Pd: mi PC tiene los drivers y ni así funciona
hello, are you planning to improve algorithms and add amplifiers in the future?
what do you have in mind?
@@nuxaudio Amplifier sound will change with new firmware?
does it have delay when you press the knobs when changing from patch to patch?
Please make a whammy can be 2 octave up..🙏
How to do Factory Reset on this MG-300?
I tried the update today and even after recalibrating the pedal, I have no sound. It seems I have no input because the tuner isn't seeing anything either.
One thing though, when the updater tellms me to the update is finished, the screen on the MG300 is still showing updating and the green bar isn't full ; almost full but not entirely.
Any thoughts ?
Thx
Hi, I got one a couple of weeks ago. One thing you probably allready read is that the data cable must be a good one. Then you probably want to leave the green bar a couple of minutes more so it can finish the setup?? One thing I got wrong from the start was the pedal calibration!! is always the same button!!
I GOT MY NUX 300 YESTERDAY, I UPDATED THE FIRMWARE BUT NOW IT DOES NOT SOUND ON MY AMPLIFIER EVEN ON PHONES. HELP PLEASE
See video 3:04 pedal recalibration.
Still can not save the wah pedal on
No guitar sound after firmware update, drum loop and tuner bypassed is all i get. what gives?
3:07
There is the way to make it aound again.
Check Nux MG300 users Group on Facebook. There some people had the same problem which was fixed
i lost the preset file how can i get new one pls help
i plug in the usb and my pc doesnt even see this unit. Is it a faulty usb cable? Is it my usb2 connection? Fustrating i cant get to first base.
Yes. You have to check some cables or install driver. You can visit Nux MG300 users Facebook Group. There some people have the same problems
@@lukaszbohdal8749 yes, i assumed i had to install the driver first. But its just not found by the PC. Only two logical reasons. Cable or unit fault. The illogical one, some strange setting.
my pedal stuck in the updating
Hello, I followed the steps as is the video and when I unplugged the source and when I reconnected it my nux did not turn on again, help?
Please try to upgrade the firmware again. Make sure the upgrade is done before unplug the power supply and USB cable.
i have muted guitar sound problem, can you help to deal with this issue?
Please calibrate the expression pedal.
how about showing how to update the firmware on a PC?
it's identical.
Hi, is this available in New Zealand?
If you cannot find it in New Zealand(Music Ways), try get one from Australia.
my computer cant detect my device
User-friendly interface and interactive: Quick Tone™
Edit Software Ten program nie działa, brak instrukcji w języku polskim.
Giá bao nhiêu tiền vậy sốp
$150US
setelah update firmware nux mg300 jadi error jadi kresek kresek
Some people has issue after update, like the unit suddenly has no sound, they have to calibrate the pedal, after doing the calibration the unit is back again (has sound), but the sound of the amps an everything is different. So are this update final or still beta ? Thnks
There is no sound algorithm be changed, you can check the discussion in MG-300 group.
facebook.com/groups/879966155822846