I bought another cable stripper....Why?

Поделиться
HTML-код
  • Опубликовано: 17 янв 2025

Комментарии • 95

  • @cardboardkiller6883
    @cardboardkiller6883 Год назад +2

    A REAL review! Thanks for making the video!

  • @johnlaw9352
    @johnlaw9352 Месяц назад +1

    i got one of these goodies too. at 6:45 in your video to strip the red ones, if you try the next size down hole in stead of tweaking it, I believe it will work better too.

  • @wozzajayscrapping9056
    @wozzajayscrapping9056 2 года назад +6

    Brilliant idea hiring it out to your customers, even better if they pay in Copper.♻️✌

  • @thescrapmeister
    @thescrapmeister 2 года назад +1

    Nice... I can't wait to get mine up and running :-)

  • @Matthew_Online
    @Matthew_Online Месяц назад +1

    I recently got mine on ec21 also. Vevor brand. Very decent machine!

    • @danthescrapper815
      @danthescrapper815  Месяц назад +1

      Ahh nice, certainly makes the stripping of cable much easier and quicker.

    • @Matthew_Online
      @Matthew_Online Месяц назад +1

      @danthescrapper815 yes exactly. Efficient much.

  • @SilverScorpion
    @SilverScorpion 2 года назад +1

    Nice pickups. I like that stripper.

    • @danthescrapper815
      @danthescrapper815  2 года назад

      A few more tweaks to get that right balance and she will be beautiful.

  • @bigredbullion3883
    @bigredbullion3883 2 года назад +1

    Great video new friend here

  • @ScrapMetalTV.
    @ScrapMetalTV. 2 года назад +2

    Great investment 👍

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Thanks mate, i can hire out 2 at a time with one to spare haha.

    • @ScrapMetalTV.
      @ScrapMetalTV. 2 года назад +2

      @@danthescrapper815 I'd hire one of you but country Victoria a tad too far 🤣🤣

    • @danthescrapper815
      @danthescrapper815  2 года назад

      @@ScrapMetalTV. hahaha yeah just a little.

  • @DUMPSTERDIVINGADELAIDE123
    @DUMPSTERDIVINGADELAIDE123 2 года назад +1

    Hello Dan, I'm a bit unwell, but I'm still watching your videos, Cheers 👍

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Hi Simon, as you would have heard me say in the video i also have a bit of a bug thanks to the kids, but get well mate im sure you will be up n about in no time.

    • @DUMPSTERDIVINGADELAIDE123
      @DUMPSTERDIVINGADELAIDE123 2 года назад

      @@danthescrapper815 - it's depression of being lonely & it's my daughter's birthday & I don't get to see her... Long story cut short

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      @@DUMPSTERDIVINGADELAIDE123 ohh i see, i know a fella scrapper who is also going through a rough period too. The main thing is at least you can still call her to communicate.....Chin up bud.

    • @DUMPSTERDIVINGADELAIDE123
      @DUMPSTERDIVINGADELAIDE123 2 года назад

      @@danthescrapper815 - I can't call her, she blacklist my phone, she's on her mother's side, Have a nice evening 🌃

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      @@DUMPSTERDIVINGADELAIDE123 ohhh i see.....Ok thanks mate try to enjoy yours.

  • @simplescrapping
    @simplescrapping 2 года назад +1

    smart thought my friend👍👍👍👍

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Cheers Van and i hope your have the best holiday mate.

    • @simplescrapping
      @simplescrapping 2 года назад +1

      @@danthescrapper815 I'm having some good resting days my friend... Trying to enjoy my vacation buddy😁

    • @danthescrapper815
      @danthescrapper815  2 года назад

      @@simplescrapping Enjoy my friend because lots of copper and aircons are waiting for you hehe.

  • @sooglablue
    @sooglablue 10 месяцев назад +1

    I have some 240mm aluminium cable- will it fit through this machine?

    • @danthescrapper815
      @danthescrapper815  10 месяцев назад

      Id need to measure the width of the biggest hole but i think it would squeeze in.

  • @BiggestKevGold
    @BiggestKevGold 2 года назад +1

    Good stuff Dan💯 you should go in to the Stripping business👍

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Absolutely not.....Ill save that for the ladies coz better to look at 🤣🤣

  • @aladdin8372
    @aladdin8372 Год назад +1

    what is the name of this machine?

    • @danthescrapper815
      @danthescrapper815  Год назад

      Hello sorry for not responding sooner, i forgot........This machine is an Enerpat cable stripper but various companies sell the same machine, i bought it off Ebay.

  • @cuscrapping
    @cuscrapping 2 года назад +2

    I just bought that same scale last night. It is supposed to get here on the 17th! You'll have to let me know how you like it. 👍

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Ahh awesome......The scale seems to work well, does what its supposed to so all i can ask for and will come in handy on some scrap collections.

    • @nelsonortiz2828
      @nelsonortiz2828 3 месяца назад +1

      @@danthescrapper815have you had to do maintenance like lubricate/oil the gears or change blades ?

    • @danthescrapper815
      @danthescrapper815  3 месяца назад

      @nelsonortiz2828 to be honest I haven't done anything to it other than spray some WD40 on it if it happens to squeak.

  • @thunderstorm864
    @thunderstorm864 Год назад +1

    How much is it and where are you buying

  • @GouniGovardhanreddy
    @GouniGovardhanreddy Год назад +1

    Where to get this machine? I am in India

  • @Hangzhou_Lansing.SimpleWu
    @Hangzhou_Lansing.SimpleWu 9 месяцев назад +1

    Your machine is similar to ours, we are the manufacturer of wire stripping and copper granulator.

    • @danthescrapper815
      @danthescrapper815  9 месяцев назад

      Yeah ok, maybe it is one of yours but personally iv got no idea but thanks for watching.

  • @TECHNICUSChannel
    @TECHNICUSChannel 11 месяцев назад +1

    I have same problem, cut not in the middle ..

    • @danthescrapper815
      @danthescrapper815  11 месяцев назад

      I find with that particular stripper it really likes to piggy tail the cable as it comes out.....its still ok to use but my bigger one is better.

  • @mrgreenswelding2853
    @mrgreenswelding2853 8 месяцев назад +1

    That looks the vevor one. The vevor one i have the blades didn't line up with the centre of the v's. I had to shim the left side.

    • @danthescrapper815
      @danthescrapper815  8 месяцев назад

      It probably is, tho i bought this from Enerpat, it will be the same machine but just rebranded like they all are.

    • @mrgreenswelding2853
      @mrgreenswelding2853 8 месяцев назад +1

      @danthescrapper815 yep. Is your blades l8ned up?

    • @danthescrapper815
      @danthescrapper815  8 месяцев назад

      @mrgreenswelding2853 yeah they seem to be tho i dont use that machine much coz iv got a bigger one.

    • @nathanwynn4450
      @nathanwynn4450 5 месяцев назад +1

      Hey mate did you manage too get the blades lined up with the v should I buy one or no

    • @mrgreenswelding2853
      @mrgreenswelding2853 5 месяцев назад

      @@nathanwynn4450 I pulled it apart and used shims to get it better.

  • @timtrumper6511
    @timtrumper6511 2 года назад +1

    I've been looking at getting that stripper, looks like a good little unit, is it just enitial adjustments then it's set or is it something that you have to continually adjust?

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Hi Tim, basically yeah, once you got it tweaked just right that will pretty much be all the adjusting you need but if your stripping some thick cable and you find it maybe a bit deep then a quick adjustment again isn't hard if needed.

    • @timtrumper6511
      @timtrumper6511 2 года назад +1

      @@danthescrapper815 pulled the trigger on the same model today, can't wait to strip some cable👌

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      @@timtrumper6511 Awesome mate, no doubt it will pay for itself in absolutely no time at all.

  • @marianvasile1251
    @marianvasile1251 Год назад +1

    it is good resistant, I tried it and I see that it is made in China?

  • @bradlang9494
    @bradlang9494 2 года назад +1

    Well great purchases you have made. The business is expanding and that is a good thing. 👍
    While you're buying all these cool things, chuck a vice on the list, you won't regret it and you could write it off for tax purposes. 😉

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Thanks Brad your right with the vice it will come in handy at times, just slack getting it haha.

  • @damienwalsh5104
    @damienwalsh5104 2 года назад +1

    The wife won't be in pressed with an other Striper 😂☘️🍺🍺

  • @dominiksuska4945
    @dominiksuska4945 2 года назад +1

    Why? Why not

  • @manojrajak4800
    @manojrajak4800 Год назад +1

    Amount pl indian currency

  • @JesseJamesSCO
    @JesseJamesSCO 6 месяцев назад +2

    The multiple holes machine isn’t the best. You can’t adjust the height only the tension. The blades are too low. I noticed you use the right hole then switch to a bigger which with the same wire and it doesn’t work that with bigger hole. I sent mine back and bought the single adjustable one it’s way better.

    • @danthescrapper815
      @danthescrapper815  6 месяцев назад +1

      @JesseJamesSCO umm actually you can adjust it but i just didn't bother coz it worked better in the other hole.......Anyway i appreciate your comment but for me with the amount of cable i get its multi hole all the way for me because i get many different sized cable and i couldn't be effed constantly adjusting heights for different sized wires.

    • @JesseJamesSCO
      @JesseJamesSCO 6 месяцев назад

      @@danthescrapper815 I hear ya, how do you adjust it?

    • @JesseJamesSCO
      @JesseJamesSCO 6 месяцев назад +1

      @@danthescrapper815 maybe you can do
      A video and show us how to adjust the blade heights.

    • @danthescrapper815
      @danthescrapper815  6 месяцев назад

      @JesseJamesSCO all you gotta do turn the screws on the top of the machine up or down left side, or right side or both sides together depending on what you need to do.

    • @JesseJamesSCO
      @JesseJamesSCO 6 месяцев назад +1

      @@danthescrapper815 actually they don’t control the height of the blade. They’re only used to keeps blade from coming up when you put the wires thru it. The tighter you turn them the more the blade tension stay in that position. But the blades only bounce up to avoid braking them or avoid jamming. The turning knobs are just to keep blades from bouncing off the cable by creating more downward pressure as it’s cutting.

  • @liamwilliams4297
    @liamwilliams4297 2 года назад +1

    I love to hire it boss, but in Perth I am better to get one myself

    • @danthescrapper815
      @danthescrapper815  2 года назад +1

      Yep and your only 3 steps away from getting one.
      Step one get onto Ebay
      Step 2 select your weapon
      Step 3 make that purchase.......Have a great day Liam.

  • @heywhatsthatsmell
    @heywhatsthatsmell Год назад +1

    A dingo ate my wire

  • @johannaharrison5276
    @johannaharrison5276 2 месяца назад +1

    So did any of you wanna beee scrapers wonder if the gear box needs oil?? Wtf people wtf is wrong with you

  • @A3Kr0n
    @A3Kr0n 2 года назад +2

    Why do all that when you can just burn off the insulation along a deserted road somewhere?
    -Any sufficiently advanced satire is indistinguishable from reality

    • @danthescrapper815
      @danthescrapper815  2 года назад

      No idea if this is actually a serious comment but ill take it as a joke instead due to the inefficiencies of what was suggested......Haha very funny... . Have a great day.

  • @Alexsoft76
    @Alexsoft76 Год назад +1

    Мечта бомжа!